[DeTomaso] Magnaflux cracks - now what?

[Will Kooiman]

In my opinion, it would have to be a pretty special block to justify repair.

Better to get a good block and fake the motor# stamping, than pass off an original block with hidden crack repairs.

Just my opinion, though.

Sent from my iPhone

> On Nov 10, 2016, at 9:29 AM, Dave Londry <davel at emspace.com> wrote:
> 
> That's the first good argument I've heard for keeping it Jeff.
> But it sounds more expensive than a $300 block plus an 0.030 bore (not including the cold treatment)?
> I imagine they would both need the same line honing etc etc.
> 
> Dave
> 
> 
>> On 2016-11-09 7:02 PM, Jeff Cobb wrote:
>> Larry,
>> Those crack of course most likely where caused by exhaust system overheating not high coolant temps.
>> I see these cracks on BMWs and block is still fine—JUST cure your overheating issues!
>> Block is good as long as cracks are drilled and pinned to stop crack migration, inner water flow hole chamfering will relieve stress edges which helped cause the cracks, that the heat did not change/damage cam/crank line bores/saddles
>> and that all the head bolt holes are drilled for deep Threadsert insertion.”””NOT HELICOIL”””.
>> 
>> Cryogenic block de-stressing should be an option if you desire to keep this block.
>> You don’t need crack migration and weak head bolt thread bores.
>> 
>> Take care,
>> Jeff Cobb
>> 
>>> On Nov 8, 2016, at 2:28 PM, Larry Finch via DeTomaso <detomaso at server.detomasolist.com> wrote:
>>> 
>>> All,
>>> 
>>> Magnaflux testing of my original block has shown a total of five cracks (LH/RH) out of six possible, as shown in the photo below. Cracks are within the marked white lines.
>>> 
>>> Cracks are from the water jacket to the head bolt threads. No cracks running into cylinders.
>>> 
>>> I had taken note that some of the head bolts showed traces of coolant on them when removed, but no signs of any rust on any of them.
>>> 
>>> Planned engine build is 383 or 408 hydraulic roller stroker using Scott Cook heads and intake with carburetor.
>>> 
>>> Do those cracks mean the original block is now history?
>>> 
>>> In 15 years of ownership I have never heard of Cleveland's exhibiting cracks in this manner.
>>> 
>>> Seeking the Family's wisdom and advice.
>>> 
>>> Thanks,
>>> 
>>> Larry
>>> 
>>> <image1.JPG>
>>> 
>>> Sent from me using a magic, handheld electronic gizmo. _______________________________________________
>>> 
>>> 
>>> Detomaso Email List is not managed by POCA
>>> Posted emails must not exceed 1.5 Megabytes
>>> DeTomaso mailing list
>>> DeTomaso at server.detomasolist.com
>>> http://server.detomasolist.com/mailman/listinfo/detomaso
>>> 
>>> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>>> 
>>> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
>> _______________________________________________
>> 
>> 
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> DeTomaso at server.detomasolist.com
>> http://server.detomasolist.com/mailman/listinfo/detomaso
>> 
>> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>> 
>> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
>> 
>> 
> 
> -- 
> Dave Londry
> Embedded Spaces Inc. (ESI)
> davel at emspace.com
> 
> 904 429 1937 (SkypeCall FLA)
> Skype:embeddedspaces
> Canada Numbers
> 604 721 2278 (cell)
> 604 589 9182 (shop line)
> 604 589 9183 (home line)
> 
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.