[DeTomaso] Oil drain plug seal
James coyne
tecnosound at hotmail.com
Wed May 25 12:48:04 EDT 2016
I myself have had better sealing against seepage using plastic or nylon washers . As Daryl mentioned , beware of over torquing the plug . - Jim
Date: Wed, 25 May 2016 11:20:18 -0500
From: daryl.architect at gmail.com
To: sjcarguy60 at yahoo.com
CC: detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Oil drain plug seal
Was it a new copper washer? I once had to re-use a washer and had a tad of
drippage until I could get a new one. You definitely don't want to crank
the plug down too hard.
On Wed, May 25, 2016 at 10:50 AM, Dennis Valdez via DeTomaso <
detomaso at server.detomasolist.com> wrote:
> Hi guys and ladies,
> Is it ok if I ask a question not about the POCA website or the BOD or
> copyrights etc.? (Sorry just kidding!)
>
> Anyway, I changed the engine oil and ZF lube this last weekend. I
> discovered that my oil drain plug had been seeping. It had a plastic
> washer on it so I changed to a copper one. I tightened it as tight as I
> dare but it still seeps a bit. Is there a torques spec for this
> somewhere? Any ideas on how to get a tight seal?
>
> Thanks,
> Dennis
>
> _______________________________________________
>
>
> Detomaso Forum NO LONGER Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
>
_______________________________________________
Detomaso Forum NO LONGER Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
I myself have had better sealing against seepage using plastic or nylon
washers . As Daryl mentioned , beware of over torquing the plug . -
Jim
Date: Wed, 25 May 2016 11:20:18 -0500
From: daryl.architect at gmail.com
To: sjcarguy60 at yahoo.com
CC: detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Oil drain plug seal
Was it a new copper washer? I once had to re-use a washer and had a tad of
drippage until I could get a new one. You definitely don't want to crank
the plug down too hard.
On Wed, May 25, 2016 at 10:50 AM, Dennis Valdez via DeTomaso <
detomaso at server.detomasolist.com> wrote:
> Hi guys and ladies,
> Is it ok if I ask a question not about the POCA website or the BOD or
> copyrights etc.? (Sorry just kidding!)
>
> Anyway, I changed the engine oil and ZF lube this last weekend. I
> discovered that my oil drain plug had been seeping. It had a plastic
> washer on it so I changed to a copper one. I tightened it as tight as I
> dare but it still seeps a bit. Is there a torques spec for this
> somewhere? Any ideas on how to get a tight seal?
>
> Thanks,
> Dennis
>
> _______________________________________________
>
>
> Detomaso Forum NO LONGER Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> [1]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
>
_______________________________________________ Detomaso Forum NO
LONGER Managed by POCA Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso To manage your
subscription (change email address, unsubscribe, etc.) use the links
above. Members who post to this list grant license to the list to
forward any message posted here to all past, current, or future members
of the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
References
1. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list