[DeTomaso] SOBill's suspension tool kit
Ken Green
kenn_green at yahoo.com
Fri May 20 11:59:06 EDT 2016
Pantera Place:
http://www.panteraplace.com/
has descriptions of removing the stock bushings.
Ken
From: "Joseph F. Byrd, Jr." <byrdjf at embarqmail.com>
To: detomaso at server.detomasolist.com
Sent: Friday, May 20, 2016 8:53 AM
Subject: [DeTomaso] SOBill's suspension tool kit
Is there a previous write up with photos, drawings and instructions of this kit.
Joe/5177/NC
-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On Behalf Of Ken Green via DeTomaso
Sent: Friday, May 20, 2016 11:28 AM
To: Rod Kunishige; detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] FW: Let's get to talking
Hi Rod,
Hope all is well with you. Wanted to let you know that Bill (SOBill) has handed off a set of tools to me to press out the factory control arm bushings. I promised to make them available to anyone who can pick them up and return them after use. Bill said he originally mailed them to people, but because of the weight of some of the pieces, the packages were tearing and parts were lost, so he gave up on that. It is pretty much all you need to do the work.
I added a carbide tipped hole saw that is needed to cut away a flange on the outer sleeve and it makes the job faster and easier.
Ken
_______________________________________________
Detomaso Forum NO LONGER Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
-------------- next part --------------
Pantera Place:
http://www.panteraplace.com/
has descriptions of removing the stock bushings.
Ken
__________________________________________________________________
From: "Joseph F. Byrd, Jr." <byrdjf at embarqmail.com>
To: detomaso at server.detomasolist.com
Sent: Friday, May 20, 2016 8:53 AM
Subject: [DeTomaso] SOBill's suspension tool kit
Is there a previous write up with photos, drawings and instructions of
this kit.
Joe/5177/NC
-----Original Message-----
From: DeTomaso [mailto:[1]detomaso-bounces at server.detomasolist.com] On
Behalf Of Ken Green via DeTomaso
Sent: Friday, May 20, 2016 11:28 AM
To: Rod Kunishige; [2]detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] FW: Let's get to talking
Hi Rod,
Hope all is well with you. Wanted to let you know that Bill
(SOBill) has handed off a set of tools to me to press out the factory
control arm bushings. I promised to make them available to anyone who
can pick them up and return them after use. Bill said he originally
mailed them to people, but because of the weight of some of the pieces,
the packages were tearing and parts were lost, so he gave up on that.
It is pretty much all you need to do the work.
I added a carbide tipped hole saw that is needed to cut away a
flange on the outer sleeve and it makes the job faster and easier.
Ken
_______________________________________________
Detomaso Forum NO LONGER Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[3]DeTomaso at server.detomasolist.com
[4]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
References
1. mailto:detomaso-bounces at server.detomasolist.com
2. mailto:detomaso at server.detomasolist.com
3. mailto:DeTomaso at server.detomasolist.com
4. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list