[DeTomaso] Rear hatch striker plate mounting
Michael Shortt
michaelsavga at gmail.com
Wed Mar 16 22:07:27 EDT 2016
http://michaelspantera.com/brokendecklatch.html
hand-tools/hand-riveters/45-piece-threaded-insert-riveter-kit-1210.html
Michael Shortt
Hi Larry,
I tried searching on Harbor Freight's website for a "Nut Rivet kit" like you
mentioned below, but no joy.
Do you have a Harbor Freight part number?
Doug Braun
Blue 73L #5505
-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at poca.com] On Behalf Of Larry Stock
Sent: Wednesday, March 16, 2016 6:36 PM
To: Larry - Ohio Time <Larry at ohiotimecorp.com>; 'Rob Dumoulin'
<rob at dumoulins.net>; 'Pantera - DeTomaso Mail List' <DeTomaso at poca.com>
Subject: Re: [DeTomaso] Rear hatch striker plate mounting
HI ROB
The early Deck lids are different so if some one is commenting on the upper
latch on a later ribbed deck lid, yours is different and doesn¹t mount the
same, but it can be modified to work, it¹s just different.The lower latch
should be the same, but if your mounting studs are broke off, you either
need to weld in new studs, which you are not wanting to do, or drill it out
and insert a 6 mm nut rivet. Then you can simply use a bolt or more
correctly, use a 6mm stud and lock-tite it in the threaded nut rivet. You
can but a Nut Rivet kit at your nearby Harbor Freight, they actually work
well for a Harbor Freight tool .
Larry Stock
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe, etc.) use
the links above.
-------------- next part --------------
[1]http://michaelspantera.com/brokendecklatch.html
hand-tools/hand-riveters/45-piece-threaded-insert-riveter-kit-1210.html
Michael Shortt
Hi Larry,
I tried searching on Harbor Freight's website for a "Nut Rivet kit"
like you
mentioned below, but no joy.
Do you have a Harbor Freight part number?
Doug Braun
Blue 73L #5505
-----Original Message-----
From: DeTomaso [mailto:[2]detomaso-bounces at poca.com] On Behalf Of Larry
Stock
Sent: Wednesday, March 16, 2016 6:36 PM
To: Larry - Ohio Time <[3]Larry at ohiotimecorp.com>; 'Rob Dumoulin'
<[4]rob at dumoulins.net>; 'Pantera - DeTomaso Mail List'
<[5]DeTomaso at poca.com>
Subject: Re: [DeTomaso] Rear hatch striker plate mounting
HI ROB
The early Deck lids are different so if some one is commenting on the
upper
latch on a later ribbed deck lid, yours is different and doesnA^1t
mount the
same, but it can be modified to work, itA^1s just different.The lower
latch
should be the same, but if your mounting studs are broke off, you
either
need to weld in new studs, which you are not wanting to do, or drill it
out
and insert a 6 mm nut rivet. Then you can simply use a bolt or more
correctly, use a 6mm stud and lock-tite it in the threaded nut rivet.
You
can but a Nut Rivet kit at your nearby Harbor Freight, they actually
work
well for a Harbor Freight tool .
Larry Stock
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[6]DeTomaso at poca.com
[7]http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
References
1. http://michaelspantera.com/brokendecklatch.html
2. mailto:detomaso-bounces at poca.com
3. mailto:Larry at ohiotimecorp.com
4. mailto:rob at dumoulins.net
5. mailto:DeTomaso at poca.com
6. mailto:DeTomaso at poca.com
7. http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list