[DeTomaso] Rear hatch striker plate mounting
gow2 at rc-tech.net
gow2 at rc-tech.net
Wed Mar 16 20:24:21 EDT 2016
My rear deck latch mount was in poor shape when I did my car. I also did
not like the Pantera rear latch. I got a common latch form the hot rod
industry and made a new mount. This pretty much shows what I did:
http://www.rc-tech.net/pantera1/decklatch/deck_latch.htm
The cover helped clean things up too:
http://www.rc-tech.net/pantera1/Reglar/DL2b.jpg
I also put a Bearclaw actuator behind the left tail light to activate the
rear deck release:
http://www.rc-tech.net/pantera1/Reglar/DL4.jpg
Just some ideas for you.
Gary
> When I got my car back from the painters, I found they had removed the
> rear striker plate on the hatch and could not reinstall it. Mine is an
> early model deck with no center seam. The metal seems too thin to tap
> threads into. When I got the car 6 years ago, the striker was always
> loose, so with considerable effort I slipped the largest nuts I could
> through the access holes and eventually got bolts to thread into them.
> Not a fun time.
>
> Is the deck supposed to be threaded?
> Are nuts supposed to be inside the deck lid?
> Is there some trick to ease the insanity?
>
> Inquiring minds and fingers less nimble than 6 years ago need to know.
> _______________________________________________
>
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
More information about the DeTomaso
mailing list