[DeTomaso] Hooking an MSD 6AL Rev Limiter to disengage the A/C Compressor
Dave
davel at emspace.com
Thu Jun 9 15:28:12 EDT 2016
Hey Rob
A 6AL only limits the coil drive output.
A 6AL-2 or a 6AL plus has a Retard Step output
"Retard Step. This retard is activated when 12 volts are applied and rpm
is above the Step1 Rpm value."
It's meant to keep those 14:1 motors from blowing the teeth off the
ring-gear,
but just program it to go true at 4000 and do your thing with a relay.
dave
On 6/9/2016 6:19 AM, Rob Dumoulin wrote:
> It appears engine revs killed my Sanden rotary compressor.A That or it
> was a cheaper build.A Regardless, my new motor will rev even higher
> and this time I am installing a high-pressure shut-off valve.A In
> addition, I'd like to use the rev limiter feature of the 6AL to shut
> off the compressor so I won't kill another one.
> I have heard of such a mod but have not seen technically how to make it
> work.A Anybody know what MSD parts are needed and how to hook it up to
> the A/C?
> RobA
>
>
>
> _______________________________________________
>
>
> Detomaso Forum NO LONGER Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Hey Rob
A 6AL only limits the coil drive output.
A 6AL-2 or a 6AL plus has a Retard Step output
"Retard Step. This retard is activated when 12 volts are applied and
rpm is above the Step1 Rpm value."
It's meant to keep those 14:1 motors from blowing the teeth off the
ring-gear,
but just program it to go true at 4000 and do your thing with a relay.
dave
On 6/9/2016 6:19 AM, Rob Dumoulin wrote:
It appears engine revs killed my Sanden rotary compressor.A That or it
was a cheaper build.A Regardless, my new motor will rev even higher
and this time I am installing a high-pressure shut-off valve.A In
addition, I'd like to use the rev limiter feature of the 6AL to shut
off the compressor so I won't kill another one.
I have heard of such a mod but have not seen technically how to make it
work.A Anybody know what MSD parts are needed and how to hook it up to
the A/C?
RobA
_______________________________________________
Detomaso Forum NO LONGER Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[1]DeTomaso at server.detomasolist.com
[2]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the li
nks above.
Members who post to this list grant license to the list to forward any message p
osted here to all past, current, or future members of the list. They also grant
the list owner permission to maintain an archive or approve the archiving of lis
t messages.
References
1. mailto:DeTomaso at server.detomasolist.com
2. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list