[DeTomaso] Has anyone researched hood vent designs?

Ken Green kenn_green at yahoo.com
Sun Jul 31 23:20:44 EDT 2016 

I think photos of that car were posted a year ago?  I want the car to look like a Pantera, not a GT40.
en

      From: "scottcouchman at yahoo.com" <scottcouchman at yahoo.com>
 To: Ken Green <kenn_green at yahoo.com> 
Cc: Rod Kunishige <rkunishige at hotmail.com>; "detomaso at server.detomasolist.com" <detomaso at server.detomasolist.com>
 Sent: Sunday, July 31, 2016 7:17 PM
 Subject: Re: [DeTomaso] Has anyone researched hood vent designs?
   
You should talk with Tony Ortiz in Arizona. He modified his Pantera to install front and rear GT40 clips.

> On Jul 31, 2016, at 6:17 PM, Ken Green via DeTomaso <detomaso at server.detomasolist.com> wrote:
> 
>  Hi Rod,
>        My plan is to modify the area behind the radiator for a large
>  vent.  I'm taking out the light bar and will go to two motors or just
>  clear covers, haven't decided yet.
>      I took some rough measurements and plan to move the front of the
>  trunk to where the flat part of the floor ends.  That gives me about 24
>  inches from the nose without losing much useful storage.
>      Kinda similar to what Gary did:  [webicon_green.png]
>  [1]http://www.rc-tech.net/pantera1/hood/hood15.jpg
> 
> 
>                                  [2]image
> 
> 
> 
> 
> 
> 
>  [webicon_green.png]
>  [webicon_green.png] [3]View on www.rc-tech.net
>  Preview by Yahoo
> 
>      A drawing is attached showing the current plan.
>  Ken
>    __________________________________________________________________
> 
>  From: Rod Kunishige <rkunishige at hotmail.com>
>  To: "detomaso at server.detomasolist.com"
>  <detomaso at server.detomasolist.com>
>  Sent: Sunday, July 31, 2016 4:08 PM
>  Subject: [DeTomaso] Has anyone researched hood vent designs?
>    Ken,
>    I have a 73L with factory vents and a spare solid hood against the
>  wall
>    for you to measure should you choose to do so.  I wanted a GT40 look.
>    The problem for me was the light bar located in the wrong spot for a
>    better opening.  I even thought of having two bucket motors to
>    eliminate it.
>    Art had tried various designs on his hood taking pics as he went thru
>    the process.  Check with him too.
>    Rod
>    Sent from [1]Outlook
>  References
>    1. [webicon_green.png] [4]http://aka.ms/weboutlook
>  _______________________________________________
>  Detomaso Email List is not managed by POCA
>  Posted emails must not exceed 1.5 Megabytes
>  DeTomaso mailing list
>  [5]DeTomaso at server.detomasolist.com
>  [webicon_gray.png]
>  [6]http://server.detomasolist.com/mailman/listinfo/detomaso
>  To manage your subscription (change email address, unsubscribe, etc.)
>  use the links above.
>  Members who post to this list grant license to the list to forward any
>  message posted here to all past, current, or future members of the
>  list. They also grant the list owner permission to maintain an archive
>  or approve the archiving of list messages.
> 
> References
> 
>  Visible links
>  1. http://www.rc-tech.net/pantera1/hood/hood15.jpg
>  2. http://www.rc-tech.net/pantera1/hood/hood15.jpg
>  3. http://www.rc-tech.net/pantera1/hood/hood15.jpg
>  4. http://aka.ms/weboutlook
>  5. mailto:DeTomaso at server.detomasolist.com
>  6. http://server.detomasolist.com/mailman/listinfo/detomaso
> 
>  Hidden links:
>  8. http://www.rc-tech.net/pantera1/hood/hood15.jpg
> <vented hood.pdf>
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.


  
-------------- next part --------------
   I think photos of that car were posted a year ago?  I want the car to
   look like a Pantera, not a GT40.
   en
     __________________________________________________________________

   From: "scottcouchman at yahoo.com" <scottcouchman at yahoo.com>
   To: Ken Green <kenn_green at yahoo.com>
   Cc: Rod Kunishige <rkunishige at hotmail.com>;
   "detomaso at server.detomasolist.com" <detomaso at server.detomasolist.com>
   Sent: Sunday, July 31, 2016 7:17 PM
   Subject: Re: [DeTomaso] Has anyone researched hood vent designs?
   You should talk with Tony Ortiz in Arizona. He modified his Pantera to
   install front and rear GT40 clips.
   > On Jul 31, 2016, at 6:17 PM, Ken Green via DeTomaso
   <[1]detomaso at server.detomasolist.com> wrote:
   >
   >  Hi Rod,
   >        My plan is to modify the area behind the radiator for a large
   >  vent.  I'm taking out the light bar and will go to two motors or
   just
   >  clear covers, haven't decided yet.
   >      I took some rough measurements and plan to move the front of the
   >  trunk to where the flat part of the floor ends.  That gives me about
   24
   >  inches from the nose without losing much useful storage.
   >      Kinda similar to what Gary did:  [webicon_green.png]
   >  [1] [webicon_green.png]
   [2]http://www.rc-tech.net/pantera1/hood/hood15.jpg
   >
   >
   >                                  [2]image
   >
   >
   >
   >
   >
   >
   >  [webicon_green.png]
   >  [webicon_green.png] [3]View on www.rc-tech.net
   >  Preview by Yahoo
   >
   >      A drawing is attached showing the current plan.
   >  Ken
   >    __________________________________________________________________
   >
   >  From: Rod Kunishige <[3]rkunishige at hotmail.com>
   >  To: "[4]detomaso at server.detomasolist.com"
   >  <[5]detomaso at server.detomasolist.com>
   >  Sent: Sunday, July 31, 2016 4:08 PM
   >  Subject: [DeTomaso] Has anyone researched hood vent designs?
   >    Ken,
   >    I have a 73L with factory vents and a spare solid hood against the
   >  wall
   >    for you to measure should you choose to do so.  I wanted a GT40
   look.
   >    The problem for me was the light bar located in the wrong spot for
   a
   >    better opening.  I even thought of having two bucket motors to
   >    eliminate it.
   >    Art had tried various designs on his hood taking pics as he went
   thru
   >    the process.  Check with him too.
   >    Rod
   >    Sent from [1]Outlook
   >  References
   >    1. [webicon_green.png] [4] [webicon_green.png]
   [6]http://aka.ms/weboutlook
   >  _______________________________________________
   >  Detomaso Email List is not managed by POCA
   >  Posted emails must not exceed 1.5 Megabytes
   >  DeTomaso mailing list
   >  [5][7]DeTomaso at server.detomasolist.com
   >  [webicon_gray.png]
   >  [6] [webicon_gray.png]
   [8]http://server.detomasolist.com/mailman/listinfo/detomaso
   >  To manage your subscription (change email address, unsubscribe,
   etc.)
   >  use the links above.
   >  Members who post to this list grant license to the list to forward
   any
   >  message posted here to all past, current, or future members of the
   >  list. They also grant the list owner permission to maintain an
   archive
   >  or approve the archiving of list messages.
   >
   > References
   >
   >  Visible links
   >  1. [webicon_green.png]
   [9]http://www.rc-tech.net/pantera1/hood/hood15.jpg
   >  2. [webicon_green.png]
   [10]http://www.rc-tech.net/pantera1/hood/hood15.jpg
   >  3. [webicon_green.png]
   [11]http://www.rc-tech.net/pantera1/hood/hood15.jpg
   >  4. [webicon_green.png] [12]http://aka.ms/weboutlook
   >  5. mailto:[13]DeTomaso at server.detomasolist.com
   >  6. [webicon_gray.png]
   [14]http://server.detomasolist.com/mailman/listinfo/detomaso
   >
   >  Hidden links:
   >  8. [webicon_green.png]
   [15]http://www.rc-tech.net/pantera1/hood/hood15.jpg
   > <vented hood.pdf>
   > _______________________________________________
   >
   >
   > Detomaso Email List is not managed by POCA
   > Posted emails must not exceed 1.5 Megabytes
   > DeTomaso mailing list
   > [16]DeTomaso at server.detomasolist.com
   > [webicon_gray.png]
   [17]http://server.detomasolist.com/mailman/listinfo/detomaso
   >
   > To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   >
   > Members who post to this list grant license to the list to forward
   any message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. mailto:detomaso at server.detomasolist.com
   2. http://www.rc-tech.net/pantera1/hood/hood15.jpg
   3. mailto:rkunishige at hotmail.com
   4. mailto:detomaso at server.detomasolist.com
   5. mailto:detomaso at server.detomasolist.com
   6. http://aka.ms/weboutlook
   7. mailto:DeTomaso at server.detomasolist.com
   8. http://server.detomasolist.com/mailman/listinfo/detomaso
   9. http://www.rc-tech.net/pantera1/hood/hood15.jpg
  10. http://www.rc-tech.net/pantera1/hood/hood15.jpg
  11. http://www.rc-tech.net/pantera1/hood/hood15.jpg
  12. http://aka.ms/weboutlook
  13. mailto:DeTomaso at server.detomasolist.com
  14. http://server.detomasolist.com/mailman/listinfo/detomaso
  15. http://www.rc-tech.net/pantera1/hood/hood15.jpg
  16. mailto:DeTomaso at server.detomasolist.com
  17. http://server.detomasolist.com/mailman/listinfo/detomaso

More information about the DeTomaso mailing list