[DeTomaso] detomaso pantera alternator bracket

jderyke at aol.com jderyke at aol.com
Wed Jul 20 02:03:21 EDT 2016


John, although a few US vendors have these as used parts, be aware the bracket is made of 1/4"  mild steel plate and without the idler pulley, the thing totals around 16 lbs. So shipping to NZ will probably equal the cost of the part.   For an original part, try <larrs at panteraparts.com> in Carson City, NV. 

They are not difficult to make but first you'll need such a part to duplicate, plus a 351-C long block to get the bolt hole positions correct.  I made one from 1/4" aluminum plate many years ago, which weighed 3 lbs. My original went to Brisbane for a friends Pantera. I have no idea where an engineering dwg could be found.

Good luck- J Deryke 

 

 

 

-----Original Message-----
From: John Bennett <jbennett111 at zoho.com>
To: detomaso <detomaso at server.detomasolist.com>
Sent: Tue, Jul 19, 2016 10:41 pm
Subject: [DeTomaso] detomaso pantera alternator bracket

Does anyone have a spare pantera alternator bracket or know where to
   get one? Maybe just the blueprint specs for one and I could have it
   made?
   Cheer,
   John

   Sent using [1]Zoho Mail

References

   1. https://www.zoho.com/mail/
_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
   John, although a few US vendors have these as used parts, be aware the
   bracket is made of 1/4"  mild steel plate and without the idler pulley,
   the thing totals around 16 lbs. So shipping to NZ will probably equal
   the cost of the part.   For an original part, try
   <larrs at panteraparts.com> in Carson City, NV.
   They are not difficult to make but first you'll need such a part to
   duplicate, plus a 351-C long block to get the bolt hole positions
   correct.  I made one from 1/4" aluminum plate many years ago, which
   weighed 3 lbs. My original went to Brisbane for a friends Pantera. I
   have no idea where an engineering dwg could be found.
   Good luck- J Deryke

   -----Original Message-----
   From: John Bennett <jbennett111 at zoho.com>
   To: detomaso <detomaso at server.detomasolist.com>
   Sent: Tue, Jul 19, 2016 10:41 pm
   Subject: [DeTomaso] detomaso pantera alternator bracket
   Does anyone have a spare pantera alternator bracket or know where to
   get one? Maybe just the blueprint specs for one and I could have it
   made?
   Cheer,
   John
   Sent using [1]Zoho Mail
   References
   1. [1]https://www.zoho.com/mail/
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [2]DeTomaso at server.detomasolist.com
   [3]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. https://www.zoho.com/mail/
   2. mailto:DeTomaso at server.detomasolist.com
   3. http://server.detomasolist.com/mailman/listinfo/detomaso


More information about the DeTomaso mailing list