[DeTomaso] Proper placement of Zeus Fasteners

Ken Green kenn_green at yahoo.com
Mon Jul 4 12:47:37 EDT 2016 

Actually, while correcting "your" versus "you're" might be the behavior of a spelling Nazi, correcting the spelling of a part someone is looking for is helpful.
However, these things have become so expensive, if you are not into urber original, there must be something just as good (assuming they really serve any purpose) that is a lot less expensive.
Ken  (if I could spell better, I'd get a real job)

      From: Dennis Valdez via DeTomaso <detomaso at server.detomasolist.com>
 To: "gonancy at juno.com" <gonancy at juno.com> 
Cc: detomaso at detomasolist.com
 Sent: Sunday, July 3, 2016 6:23 PM
 Subject: Re: [DeTomaso] Proper placement of Zeus Fasteners
   


> On Jul 2, 2016, at 12:43 PM, "gonancy at juno.com" <gonancy at juno.com> wrote:
> 
> Dzus fasteners, they're spelled Dzus fasteners. 
> 
> The Spell Nazi still vigilant 
> 
> Please note: message attached
> 
> From: James coyne <tecnosound at hotmail.com>
> To: John Bennett <jbennett111 at zoho.com>, detomaso <detomaso at detomasolist.com>
> Subject: Re: [DeTomaso] Proper placement of Zeus Fasteners
> Date: Fri, 1 Jul 2016 23:10:50 -0700
> 
> 
> 
> ____________________________________________________________
> Affordable Wireless Plans
> Set up is easy. Get online in minutes.
> Starting at only $9.95 per month! 
> www.netzero.net?refcd=nzmem0216
>  John , I have a 1971 , 1972 and 1985 . I did a quick check and
>  determined that the 1985 GT5-s is spaced differently than the 1972 pre
>  L . I can supply The specs you need for your 74 if someone can verify
>  that they are the same as the 71 or 72 .  - Jim
>  Date: Fri, 1 Jul 2016 22:31:12 -0700
>  From: jbennett111 at zoho.com
>  To: detomaso at detomasolist.com
>  Subject: [DeTomaso] Proper placement of Zeus Fasteners
> 
> 
> 
> 
>            Let me start over. Apologies Would anyone happen to know the proper
> placement, spacing, and dimensions of the Zeus Fastener holes for the rear remov
> able boot (trunk)? Someone welded and bogged mine over in order to paint the eng
> ine bay. Is there a difference between the model years?I could use the removable
> bit as a template but I am missing that as well.Kind regards,JohnSent using Zoh
> o Mail
> 
> 
> 
> 
> 
> 
> 
> 
> 
>  _______________________________________________ Detomaso Email List is
>  not managed by POCA Posted emails must not exceed 1.5 Megabytes
>  DeTomaso mailing list DeTomaso at server.detomasolist.com
>  http://server.detomasolist.com/mailman/listinfo/detomasoTo manage your
>  subscription (change email address, unsubscribe, etc.) use the links
>  above. Members who post to this list grant license to the list to
>  forward any message posted here to all past, current, or future members
>  of the list. They also grant the list owner permission to maintain an
>  archive or approve the archiving of list messages.
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

  
-------------- next part --------------
   Actually, while correcting "your" versus "you're" might be the behavior
   of a spelling Nazi, correcting the spelling of a part someone is
   looking for is helpful.
   However, these things have become so expensive, if you are not into
   urber original, there must be something just as good (assuming they
   really serve any purpose) that is a lot less expensive.
   Ken  (if I could spell better, I'd get a real job)
     __________________________________________________________________

   From: Dennis Valdez via DeTomaso <detomaso at server.detomasolist.com>
   To: "gonancy at juno.com" <gonancy at juno.com>
   Cc: detomaso at detomasolist.com
   Sent: Sunday, July 3, 2016 6:23 PM
   Subject: Re: [DeTomaso] Proper placement of Zeus Fasteners
   > On Jul 2, 2016, at 12:43 PM, "[1]gonancy at juno.com"
   <[2]gonancy at juno.com> wrote:
   >
   > Dzus fasteners, they're spelled Dzus fasteners.
   >
   > The Spell Nazi still vigilant
   >
   > Please note: message attached
   >
   > From: James coyne <[3]tecnosound at hotmail.com>
   > To: John Bennett <[4]jbennett111 at zoho.com>, detomaso
   <[5]detomaso at detomasolist.com>
   > Subject: Re: [DeTomaso] Proper placement of Zeus Fasteners
   > Date: Fri, 1 Jul 2016 23:10:50 -0700
   >
   >
   >
   > ____________________________________________________________
   > Affordable Wireless Plans
   > Set up is easy. Get online in minutes.
   > Starting at only $9.95 per month!
   > www.netzero.net?refcd=nzmem0216
   >  John , I have a 1971 , 1972 and 1985 . I did a quick check and
   >  determined that the 1985 GT5-s is spaced differently than the 1972
   pre
   >  L . I can supply The specs you need for your 74 if someone can
   verify
   >  that they are the same as the 71 or 72 .  - Jim
   >  Date: Fri, 1 Jul 2016 22:31:12 -0700
   >  From: [6]jbennett111 at zoho.com
   >  To: [7]detomaso at detomasolist.com
   >  Subject: [DeTomaso] Proper placement of Zeus Fasteners
   >
   >
   >
   >
   >            Let me start over. Apologies Would anyone happen to know
   the proper
   > placement, spacing, and dimensions of the Zeus Fastener holes for the
   rear remov
   > able boot (trunk)? Someone welded and bogged mine over in order to
   paint the eng
   > ine bay. Is there a difference between the model years?I could use
   the removable
   > bit as a template but I am missing that as well.Kind regards,JohnSent
   using Zoh
   > o Mail
   >
   >
   >
   >
   >
   >
   >
   >
   >
   >  _______________________________________________ Detomaso Email List
   is
   >  not managed by POCA Posted emails must not exceed 1.5 Megabytes
   >  DeTomaso mailing list [8]DeTomaso at server.detomasolist.com
   >  [9]http://server.detomasolist.com/mailman/listinfo/detomasoTo manage
   your
   >  subscription (change email address, unsubscribe, etc.) use the links
   >  above. Members who post to this list grant license to the list to
   >  forward any message posted here to all past, current, or future
   members
   >  of the list. They also grant the list owner permission to maintain
   an
   >  archive or approve the archiving of list messages.
   > _______________________________________________
   >
   >
   > Detomaso Email List is not managed by POCA
   > Posted emails must not exceed 1.5 Megabytes
   > DeTomaso mailing list
   > [10]DeTomaso at server.detomasolist.com
   > [11]http://server.detomasolist.com/mailman/listinfo/detomaso
   >
   > To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   >
   > Members who post to this list grant license to the list to forward
   any message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [12]DeTomaso at server.detomasolist.com
   [13]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. mailto:gonancy at juno.com
   2. mailto:gonancy at juno.com
   3. mailto:tecnosound at hotmail.com
   4. mailto:jbennett111 at zoho.com
   5. mailto:detomaso at detomasolist.com
   6. mailto:jbennett111 at zoho.com
   7. mailto:detomaso at detomasolist.com
   8. mailto:DeTomaso at server.detomasolist.com
   9. http://server.detomasolist.com/mailman/listinfo/detomaso
  10. mailto:DeTomaso at server.detomasolist.com
  11. http://server.detomasolist.com/mailman/listinfo/detomaso
  12. mailto:DeTomaso at server.detomasolist.com
  13. http://server.detomasolist.com/mailman/listinfo/detomaso

More information about the DeTomaso mailing list