[DeTomaso] Proper placement of Zeus Fasteners

[James coyne]

Duly noted !   :)

From: gonancy at juno.com
Date: Sat, 2 Jul 2016 19:43:31 +0000
To: tecnosound at hotmail.com
CC: jbennett111 at zoho.com; detomaso at detomasolist.com
Subject: Re: [DeTomaso] Proper placement of Zeus Fasteners

Dzus fasteners, they're spelled Dzus fasteners. 
 
The Spell Nazi still vigilant 
 
Please note: message attached
 
From: James coyne <tecnosound at hotmail.com>
To: John Bennett <jbennett111 at zoho.com>, detomaso <detomaso at detomasolist.com>
Subject: Re: [DeTomaso] Proper placement of Zeus Fasteners
Date: Fri, 1 Jul 2016 23:10:50 -0700
 
 
 
____________________________________________________________
Affordable Wireless Plans
Set up is easy. Get online in minutes.
Starting at only $9.95 per month! 
www.netzero.net?refcd=nzmem0216

John , I have a 1971 , 1972 and 1985 . I did a quick check and determined that the 1985 GT5-s is spaced differently than the 1972 pre L . I can supply The specs you need for your 74 if someone can verify that they are the same as the 71 or 72 .  - Jim

Date: Fri, 1 Jul 2016 22:31:12 -0700
From: jbennett111 at zoho.com
To: detomaso at detomasolist.com
Subject: [DeTomaso] Proper placement of Zeus Fasteners

 
        
 
        
            Let me start over. Apologies Would anyone happen to know the proper placement, spacing, and dimensions of the Zeus Fastener holes for the rear removable boot (trunk)? Someone welded and bogged mine over in order to paint the engine bay. Is there a difference between the model years?I could use the removable bit as a template but I am missing that as well.Kind regards,JohnSent using Zoho Mail
                
            
        
        
 
    
    
 

_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
John , I have a 1971 , 1972 and 1985 . I did a quick check and
   determined that the 1985 GT5-s is spaced differently than the 1972 pre
   L . I can supply The specs you need for your 74 if someone can verify
   that they are the same as the 71 or 72 .  - Jim
   Date: Fri, 1 Jul 2016 22:31:12 -0700
   From: jbennett111 at zoho.com
   To: detomaso at detomasolist.com
   Subject: [DeTomaso] Proper placement of Zeus Fasteners




            Let me start over. Apologies Would anyone happen to know the proper
placement, spacing, and dimensions of the Zeus Fastener holes for the rear remov
able boot (trunk)? Someone welded and bogged mine over in order to paint the eng
ine bay. Is there a difference between the model years?I could use the removable
 bit as a template but I am missing that as well.Kind regards,JohnSent using Zoh
o Mail









   _______________________________________________ Detomaso Email List is
   not managed by POCA Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list DeTomaso at server.detomasolist.com
   http://server.detomasolist.com/mailman/listinfo/detomaso To manage your
   subscription (change email address, unsubscribe, etc.) use the links
   above. Members who post to this list grant license to the list to
   forward any message posted here to all past, current, or future members
   of the list. They also grant the list owner permission to maintain an
   archive or approve the archiving of list messages. 		 	   		  
-------------- next part --------------
   Duly noted !   :)
   From: gonancy at juno.com
   Date: Sat, 2 Jul 2016 19:43:31 +0000
   To: tecnosound at hotmail.com
   CC: jbennett111 at zoho.com; detomaso at detomasolist.com
   Subject: Re: [DeTomaso] Proper placement of Zeus Fasteners
Dzus fasteners, they're spelled Dzus fasteners.

The Spell Nazi still vigilant

Please note: message attached

From: James coyne <tecnosound at hotmail.com>
To: John Bennett <jbennett111 at zoho.com>, detomaso <detomaso at detomasolist.com>
Subject: Re: [DeTomaso] Proper placement of Zeus Fasteners
Date: Fri, 1 Jul 2016 23:10:50 -0700



____________________________________________________________
Affordable Wireless Plans
Set up is easy. Get online in minutes.
Starting at only $9.95 per month!
www.netzero.net?refcd=nzmem0216

   John , I have a 1971 , 1972 and 1985 . I did a quick check and
   determined that the 1985 GT5-s is spaced differently than the 1972 pre
   L . I can supply The specs you need for your 74 if someone can verify
   that they are the same as the 71 or 72 . - Jim Date: Fri, 1 Jul 2016
   22:31:12 -0700 From: jbennett111 at zoho.com To: detomaso at detomasolist.com
   Subject: [DeTomaso] Proper placement of Zeus Fasteners Let me start
   over. Apologies Would anyone happen to know the proper placement,
   spacing, and dimensions of the Zeus Fastener holes for the rear
   removable boot (trunk)? Someone welded and bogged mine over in order to
   paint the engine bay. Is there a difference between the model years?I
   could use the removable bit as a template but I am missing that as
   well.Kind regards,JohnSent using Zoho Mail
   _______________________________________________ Detomaso Email List is
   not managed by POCA Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list DeTomaso at server.detomasolist.com
   http://server.detomasolist.com/mailman/listinfo/detomaso To manage your
   subscription (change email address, unsubscribe, etc.) use the links
   above. Members who post to this list grant license to the list to
   forward any message posted here to all past, current, or future members
   of the list. They also grant the list owner permission to maintain an
   archive or approve the archiving of list messages.
   John , I have a 1971 , 1972 and 1985 . I did a quick check and
   determined that the 1985 GT5-s is spaced differently than the 1972 pre
   L . I can supply The specs you need for your 74 if someone can verify
   that they are the same as the 71 or 72 . - Jim Date: Fri, 1 Jul 2016
   22:31:12 -0700 From: jbennett111 at zoho.com To: detomaso at detomasolist.com
   Subject: [DeTomaso] Proper placement of Zeus Fasteners Let me start
   over. Apologies Would anyone happen to know the proper placement,
   spacing, and dimensions of the Zeus Fastener holes for the rear remov
   able boot (trunk)? Someone welded and bogged mine over in order to
   paint the eng ine bay. Is there a difference between the model years?I
   could use the removable bit as a template but I am missing that as
   well.Kind regards,JohnSent using Zoh o Mail
   _______________________________________________ Detomaso Email List is
   not managed by POCA Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list DeTomaso at server.detomasolist.com
   http://server.detomasolist.com/mailman/listinfo/detomaso To manage your
   subscription (change email address, unsubscribe, etc.) use the links
   above. Members who post to this list grant license to the list to
   forward any message posted here to all past, current, or future members
   of the list. They also grant the list owner permission to maintain an
   archive or approve the archiving of list messages.