[DeTomaso] Proper placement of Zeus Fasteners
Ken Green
kenn_green at yahoo.com
Sat Jul 2 11:49:34 EDT 2016
I'd be really careful about using anyone else's measurements. Things have a way of drifting.
If there are holes in the trunk insert, can't you get it centered and center punch through the holes into the body to position the fasteners?
Ken
From: John Bennett <jbennett111 at zoho.com>
To: detomaso <detomaso at detomasolist.com>
Sent: Friday, July 1, 2016 10:31 PM
Subject: [DeTomaso] Proper placement of Zeus Fasteners
Let me start over. Apologies
Would anyone happen to know the proper placement, spacing, and
dimensions of the Zeus Fastener holes for the rear removable boot
(trunk)? Someone welded and bogged mine over in order to paint the
engine bay. Is there a difference between the model years?
I could use the removable bit as a template but I am missing that as
well.
Kind regards,
John
Sent using [1]Zoho Mail
References
1. https://www.zoho.com/mail/
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
I'd be really careful about using anyone else's measurements. Things
have a way of drifting.
If there are holes in the trunk insert, can't you get it centered and
center punch through the holes into the body to position the fasteners?
Ken
__________________________________________________________________
From: John Bennett <jbennett111 at zoho.com>
To: detomaso <detomaso at detomasolist.com>
Sent: Friday, July 1, 2016 10:31 PM
Subject: [DeTomaso] Proper placement of Zeus Fasteners
Let me start over. Apologies
Would anyone happen to know the proper placement, spacing, and
dimensions of the Zeus Fastener holes for the rear removable boot
(trunk)? Someone welded and bogged mine over in order to paint the
engine bay. Is there a difference between the model years?
I could use the removable bit as a template but I am missing that as
well.
Kind regards,
John
Sent using [1]Zoho Mail
References
1. [1]https://www.zoho.com/mail/
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[2]DeTomaso at server.detomasolist.com
[3]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. https://www.zoho.com/mail/
2. mailto:DeTomaso at server.detomasolist.com
3. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list