[DeTomaso] Proper placement of Zeus Fasteners

[James coyne]

John , I have a 1971 , 1972 and 1985 . I did a quick check and determined that the 1985 GT5-s is spaced differently than the 1972 pre L . I can supply The specs you need for your 74 if someone can verify that they are the same as the 71 or 72 .  - Jim

Date: Fri, 1 Jul 2016 22:31:12 -0700
From: jbennett111 at zoho.com
To: detomaso at detomasolist.com
Subject: [DeTomaso] Proper placement of Zeus Fasteners

 
        
 
        
            Let me start over. Apologies Would anyone happen to know the proper placement, spacing, and dimensions of the Zeus Fastener holes for the rear removable boot (trunk)? Someone welded and bogged mine over in order to paint the engine bay. Is there a difference between the model years?I could use the removable bit as a template but I am missing that as well.Kind regards,JohnSent using Zoho Mail
                
            
        
        
 
    
    
 

_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages. 		 	   		  
-------------- next part --------------
   John , I have a 1971 , 1972 and 1985 . I did a quick check and
   determined that the 1985 GT5-s is spaced differently than the 1972 pre
   L . I can supply The specs you need for your 74 if someone can verify
   that they are the same as the 71 or 72 .  - Jim
   Date: Fri, 1 Jul 2016 22:31:12 -0700
   From: jbennett111 at zoho.com
   To: detomaso at detomasolist.com
   Subject: [DeTomaso] Proper placement of Zeus Fasteners




            Let me start over. Apologies Would anyone happen to know the proper
placement, spacing, and dimensions of the Zeus Fastener holes for the rear remov
able boot (trunk)? Someone welded and bogged mine over in order to paint the eng
ine bay. Is there a difference between the model years?I could use the removable
 bit as a template but I am missing that as well.Kind regards,JohnSent using Zoh
o Mail









   _______________________________________________ Detomaso Email List is
   not managed by POCA Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list DeTomaso at server.detomasolist.com
   http://server.detomasolist.com/mailman/listinfo/detomaso To manage your
   subscription (change email address, unsubscribe, etc.) use the links
   above. Members who post to this list grant license to the list to
   forward any message posted here to all past, current, or future members
   of the list. They also grant the list owner permission to maintain an
   archive or approve the archiving of list messages.