[DeTomaso] Odd ball ZF bell housing on ebay

[Tomas Gunnarsson]

Isn't the number of holes we're talking about the ones facing the trans,
not the engine?

Tomas



<-----Ursprungligt Meddelande----->

 	 	From: rfmccall at comcast.net [rfmccall at comcast.net]
Sent: 17/1/2016 11:11:30 PM
To: detomaso at poca.com
Subject: [DeTomaso] Odd ball ZF bell housing on ebay 

If you look closely at the front side, it has 7 holes . Two are for the
locating dowel pins and 5 are for bellhousing bolts for the early
260/289 bolt pattern. The later small blocks (including the Cleveland)
require 6 attachment bolts. 
It is for a GT40 with an early (5 bolt) small block. 


Ron McCall 

_______________________________________________ 

Detomaso Forum Managed by POCA 
Posted emails must not exceed 1.5 Megabytes 
DeTomaso mailing list 
DeTomaso at poca.com 
http://poca.com/mailman/listinfo/detomaso_poca.com 

To manage your subscription (change email address, unsubscribe, etc.)
use the links above. 
. 
	
-------------- next part --------------
   Isn't the number of holes we're talking about the ones facing the
   trans, not the engine?

   Tomas
   <-----Ursprungligt Meddelande----->
       From: rfmccall at comcast.net [rfmccall at comcast.net]
   Sent: 17/1/2016 11:11:30 PM
   To: detomaso at poca.com
   Subject: [DeTomaso] Odd ball ZF bell housing on ebay
   If you look closely at the front side, it has 7 holes . Two are for the
   locating dowel pins and 5 are for bellhousing bolts for the early
   260/289 bolt pattern. The later small blocks (including the Cleveland)
   require 6 attachment bolts.
   It is for a GT40 with an early (5 bolt) small block.
   Ron McCall
   _______________________________________________
   Detomaso Forum Managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   DeTomaso at poca.com
   http://poca.com/mailman/listinfo/detomaso_poca.com
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   .