[DeTomaso] Best stroker kit for a Cleveland

Joseph F. Byrd, Jr. byrdjf at embarqmail.com
Fri Jan 15 18:34:45 EST 2016


Is that 100 sq ins be filter surface area?  And for a round filter do they
consider surface area (3.1 X d X h = area)
3.1 X 14 X 5 = >200


-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at poca.com] On Behalf Of R.J
Sent: Friday, January 15, 2016 18:14 PM
To: detomaso at poca.com
Subject: Re: [DeTomaso] Best stroker kit for a Cleveland

That is because an oiled K&N filter element has way less air flow than a
paper filter element.

Am 15.01.2016 um 23:57 schrieb Ken Green via DeTomaso:
>     On the K&N filter web site there are suggestions on air filter area,
>     and it looks like they think we need a lot bigger filters, like 100 sq
>     in?  That would be about 5 inches high a for a 14 inch diameter
filter.
>     Ken
>       
> __________________________________________________________________
>
>     From: Garth Rodericks via DeTomaso <detomaso at poca.com>
>     To: Mike Drew <MikeLDrew at aol.com>
>     Cc: DeTomaso Mail List <detomaso at poca.com>
>     Sent: Friday, January 15, 2016 2:05 PM
>     Subject: Re: [DeTomaso] Best stroker kit for a Cleveland
>       I believe I have the standard Mustang version of the Blue Thunder
>       (angled carb pad).  I'll double check tonight.  Also, I believe I
>     have
>       an earlier engine screen (it's all screen and slopes down at the
>       window.
>       The air filter is a Hall drop base air filter with the cast aluminum
>       "Pantera" script lid.  I did try a stamped lid as well without
>     success.
>       Cheers!
>       Garth
>         __________________________________________________________________
>       From: Mike Drew <[1]MikeLDrew at aol.com>
>       To: Garth Rodericks <[2]garth_rodericks at yahoo.com>
>       Cc: DeTomaso Mail List <[3]detomaso at poca.com>
>       Sent: Friday, January 15, 2016 12:40 PM
>       Subject: Re: Best stroker kit for a Cleveland
>       Garth,
>       WHICH Blue Thunder intake do you have? The standard Mustang version
>     or
>       the Pantera version?
>       I had to change to a different air cleaner to get it to fit under my
>       screen when I put new rubber engine mount donuts in. With the old
>     ones
>       my existing Hall/K&N fit fine. I had to get a different, thinner lid
>       with the new mounts as it raised the engine a tiny bit....
>       Mike
>       Sent from my iPhone
>       On Jan 15, 2016, at 10:57, Garth Rodericks
>       <[1][4]garth_rodericks at yahoo.com> wrote:
>       Uh, no it DOES NOT.
>       I have a Blue Thunder intake on my Pantera at the moment with a
>     Holley
>       670 Avenger carb and NO carb spacer, and the drop base air cleaner
>     does
>       NOT fit under the stock screen.
>       Cheers!
>       Garth
>       --- Original Message ---
>     Dan,
>     Excellent write up, but you forgot that of the intakes tested the blue
>     thunder w
>     as among the best, and it DOES fit under the stock screen....
>     Mike
>     Sent from my iPad
>     References
>       1. mailto:[5]garth_rodericks at yahoo.com
>     _______________________________________________
>     Detomaso Forum Managed by POCA
>     Posted emails must not exceed 1.5 Megabytes
>     DeTomaso mailing list
>     [6]DeTomaso at poca.com
>     [7]http://poca.com/mailman/listinfo/detomaso_poca.com
>     To manage your subscription (change email address, unsubscribe, etc.)
>     use the links above.
>
> References
>
>     1. mailto:MikeLDrew at aol.com
>     2. mailto:garth_rodericks at yahoo.com
>     3. mailto:detomaso at poca.com
>     4. mailto:garth_rodericks at yahoo.com
>     5. mailto:garth_rodericks at yahoo.com
>     6. mailto:DeTomaso at poca.com
>     7. http://poca.com/mailman/listinfo/detomaso_poca.com
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list 
> DeTomaso at poca.com http://poca.com/mailman/listinfo/detomaso_poca.com
>
> To manage your subscription (change email address, unsubscribe, etc.) use
the links above.






More information about the DeTomaso mailing list