[DeTomaso] Best stroker kit for a Cleveland
Ken Green
kenn_green at yahoo.com
Fri Jan 15 17:57:49 EST 2016
On the K&N filter web site there are suggestions on air filter area, and it looks like they think we need a lot bigger filters, like 100 sq in? That would be about 5 inches high a for a 14 inch diameter filter.
Ken
From: Garth Rodericks via DeTomaso <detomaso at poca.com>
To: Mike Drew <MikeLDrew at aol.com>
Cc: DeTomaso Mail List <detomaso at poca.com>
Sent: Friday, January 15, 2016 2:05 PM
Subject: Re: [DeTomaso] Best stroker kit for a Cleveland
I believe I have the standard Mustang version of the Blue Thunder
(angled carb pad). I'll double check tonight. Also, I believe I have
an earlier engine screen (it's all screen and slopes down at the
window.
The air filter is a Hall drop base air filter with the cast aluminum
"Pantera" script lid. I did try a stamped lid as well without success.
Cheers!
Garth
__________________________________________________________________
From: Mike Drew <MikeLDrew at aol.com>
To: Garth Rodericks <garth_rodericks at yahoo.com>
Cc: DeTomaso Mail List <detomaso at poca.com>
Sent: Friday, January 15, 2016 12:40 PM
Subject: Re: Best stroker kit for a Cleveland
Garth,
WHICH Blue Thunder intake do you have? The standard Mustang version or
the Pantera version?
I had to change to a different air cleaner to get it to fit under my
screen when I put new rubber engine mount donuts in. With the old ones
my existing Hall/K&N fit fine. I had to get a different, thinner lid
with the new mounts as it raised the engine a tiny bit....
Mike
Sent from my iPhone
On Jan 15, 2016, at 10:57, Garth Rodericks
<[1]garth_rodericks at yahoo.com> wrote:
Uh, no it DOES NOT.
I have a Blue Thunder intake on my Pantera at the moment with a Holley
670 Avenger carb and NO carb spacer, and the drop base air cleaner does
NOT fit under the stock screen.
Cheers!
Garth
--- Original Message ---
Dan,
Excellent write up, but you forgot that of the intakes tested the blue thunder w
as among the best, and it DOES fit under the stock screen....
Mike
Sent from my iPad
References
1. mailto:garth_rodericks at yahoo.com
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
-------------- next part --------------
On the K&N filter web site there are suggestions on air filter area,
and it looks like they think we need a lot bigger filters, like 100 sq
in? That would be about 5 inches high a for a 14 inch diameter filter.
Ken
__________________________________________________________________
From: Garth Rodericks via DeTomaso <detomaso at poca.com>
To: Mike Drew <MikeLDrew at aol.com>
Cc: DeTomaso Mail List <detomaso at poca.com>
Sent: Friday, January 15, 2016 2:05 PM
Subject: Re: [DeTomaso] Best stroker kit for a Cleveland
I believe I have the standard Mustang version of the Blue Thunder
(angled carb pad). I'll double check tonight. Also, I believe I
have
an earlier engine screen (it's all screen and slopes down at the
window.
The air filter is a Hall drop base air filter with the cast aluminum
"Pantera" script lid. I did try a stamped lid as well without
success.
Cheers!
Garth
__________________________________________________________________
From: Mike Drew <[1]MikeLDrew at aol.com>
To: Garth Rodericks <[2]garth_rodericks at yahoo.com>
Cc: DeTomaso Mail List <[3]detomaso at poca.com>
Sent: Friday, January 15, 2016 12:40 PM
Subject: Re: Best stroker kit for a Cleveland
Garth,
WHICH Blue Thunder intake do you have? The standard Mustang version
or
the Pantera version?
I had to change to a different air cleaner to get it to fit under my
screen when I put new rubber engine mount donuts in. With the old
ones
my existing Hall/K&N fit fine. I had to get a different, thinner lid
with the new mounts as it raised the engine a tiny bit....
Mike
Sent from my iPhone
On Jan 15, 2016, at 10:57, Garth Rodericks
<[1][4]garth_rodericks at yahoo.com> wrote:
Uh, no it DOES NOT.
I have a Blue Thunder intake on my Pantera at the moment with a
Holley
670 Avenger carb and NO carb spacer, and the drop base air cleaner
does
NOT fit under the stock screen.
Cheers!
Garth
--- Original Message ---
Dan,
Excellent write up, but you forgot that of the intakes tested the blue
thunder w
as among the best, and it DOES fit under the stock screen....
Mike
Sent from my iPad
References
1. mailto:[5]garth_rodericks at yahoo.com
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[6]DeTomaso at poca.com
[7]http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
References
1. mailto:MikeLDrew at aol.com
2. mailto:garth_rodericks at yahoo.com
3. mailto:detomaso at poca.com
4. mailto:garth_rodericks at yahoo.com
5. mailto:garth_rodericks at yahoo.com
6. mailto:DeTomaso at poca.com
7. http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list