[DeTomaso] Best stroker kit for a Cleveland
Garth Rodericks
garth_rodericks at yahoo.com
Fri Jan 15 17:05:34 EST 2016
I believe I have the standard Mustang version of the Blue Thunder (angled carb pad). I'll double check tonight. Also, I believe I have an earlier engine screen (it's all screen and slopes down at the window.
The air filter is a Hall drop base air filter with the cast aluminum "Pantera" script lid. I did try a stamped lid as well without success.
Cheers!
Garth
From: Mike Drew <MikeLDrew at aol.com>
To: Garth Rodericks <garth_rodericks at yahoo.com>
Cc: DeTomaso Mail List <detomaso at poca.com>
Sent: Friday, January 15, 2016 12:40 PM
Subject: Re: Best stroker kit for a Cleveland
Garth,
WHICH Blue Thunder intake do you have? The standard Mustang version or the Pantera version?
I had to change to a different air cleaner to get it to fit under my screen when I put new rubber engine mount donuts in. With the old ones my existing Hall/K&N fit fine. I had to get a different, thinner lid with the new mounts as it raised the engine a tiny bit....
Mike
Sent from my iPhone
On Jan 15, 2016, at 10:57, Garth Rodericks <garth_rodericks at yahoo.com> wrote:
Uh, no it DOES NOT.
I have a Blue Thunder intake on my Pantera at the moment with a Holley 670 Avenger carb and NO carb spacer, and the drop base air cleaner does NOT fit under the stock screen.
Cheers!Garth
--- Original Message ---Dan,
Excellent write up, but you forgot that of the intakes tested the blue thunder was among the best, and it DOES fit under the stock screen....
Mike
Sent from my iPad
-------------- next part --------------
I believe I have the standard Mustang version of the Blue Thunder
(angled carb pad). I'll double check tonight. Also, I believe I have
an earlier engine screen (it's all screen and slopes down at the
window.
The air filter is a Hall drop base air filter with the cast aluminum
"Pantera" script lid. I did try a stamped lid as well without success.
Cheers!
Garth
__________________________________________________________________
From: Mike Drew <MikeLDrew at aol.com>
To: Garth Rodericks <garth_rodericks at yahoo.com>
Cc: DeTomaso Mail List <detomaso at poca.com>
Sent: Friday, January 15, 2016 12:40 PM
Subject: Re: Best stroker kit for a Cleveland
Garth,
WHICH Blue Thunder intake do you have? The standard Mustang version or
the Pantera version?
I had to change to a different air cleaner to get it to fit under my
screen when I put new rubber engine mount donuts in. With the old ones
my existing Hall/K&N fit fine. I had to get a different, thinner lid
with the new mounts as it raised the engine a tiny bit....
Mike
Sent from my iPhone
On Jan 15, 2016, at 10:57, Garth Rodericks
<[1]garth_rodericks at yahoo.com> wrote:
Uh, no it DOES NOT.
I have a Blue Thunder intake on my Pantera at the moment with a Holley
670 Avenger carb and NO carb spacer, and the drop base air cleaner does
NOT fit under the stock screen.
Cheers!
Garth
--- Original Message ---
Dan,
Excellent write up, but you forgot that of the intakes tested the blue thunder w
as among the best, and it DOES fit under the stock screen....
Mike
Sent from my iPad
References
1. mailto:garth_rodericks at yahoo.com
More information about the DeTomaso
mailing list