[DeTomaso] Campagnolo Wheels

Tue Jan 12 15:10:40 EST 2016

I have seen aluminum Gr-3 valve stems for sale at a couple of vendor's shops. I also like the short chromed brass ones available everywhere. Likely, U.S stock were cheap rubber, but I advise-  do NOT use them; they deteriorate from ozone and weathering so fast you risk wrecking your car when they break in half while driving! Authenticity can hurt you and your wallet. 
Good luck- J DeRyke

-----Original Message-----
From: Guido deTomaso <guido_detomaso at prodigy.net>
To: Michael Shortt <michaelsavga at gmail.com>; detomaso <detomaso at poca.com>
Sent: Mon, Jan 11, 2016 12:27 pm
Subject: Re: [DeTomaso] Campagnolo Wheels

Well, from what I recently learned, I ought to be looking for "flat
   pentagon" with "medium" lug wrench reliefs, though I might go for
   "large" lug reliefs if they came my way.  That way also I could tell
   one set from the other, forever.
   While we're in the 'hood, what is the correct valve stem and are they
   available ?
   GD
     __________________________________________________________________

   From: Michael Shortt <michaelsavga at gmail.com>
   To: detomaso at poca.com
   Sent: Friday, January 8, 2016 9:17 PM
   Subject: [DeTomaso] Campagnolo Wheels
     Greetings,
     After gathering all my wheels in one place and a brief inventory
   today,
     I have 21 Campy wheels,
     5 Single Slots and a mixture of the 4 Double Slots and Zero Triple
     Slots ( No 10") Plus 2 sets of 17" Boyd Coddington Wheels made for
   Hall
     Pantera.
     And the 17" 10 spokes on the car now with 335/35 and 245/40.
     I am keeping the 10 spokes with PZeros for Street use,
     And one set of the 17" Hall Wheels with 315/235 Kumhos for Rally and
     Track use.
     I will be keeping the Single Slots for Concours with skinny
   Blackwalls
     and a set of Double Slots with Vintage Arrivas for Photos, With a
   spare
     Front and a Spare Rear in case of a boo boo.
     That leaves 2 full sets of double slot wheels to dispose of. Sell or
     Trade. Photos Available.
     I'd love a Triple Slot set. Anybody have some?
     Any trade offers?
     I will sort them this week by design, Thanks Mike Drew for the Campy
     Wheel education.
     Michael Shortt
     Just let a local guy soda blast two of them down to the green primer,
     I'll probably paint them Argent Silver and Clear them just to see the
     final results.
     Photo attached.
   _______________________________________________
   Detomaso Forum Managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
 [1]DeTomaso at poca.com
   [2]http://poca.com/mailman/listinfo/detomaso_poca.com
 To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.

References

   1. mailto:DeTomaso at poca.com
   2. http://poca.com/mailman/listinfo/detomaso_poca.com
_______________________________________________

Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

-------------- next part --------------
   I have seen aluminum Gr-3 valve stems for sale at a couple of vendor's
   shops. I also like the short chromed brass ones available everywhere.
   Likely, U.S stock were cheap rubber, but I advise-  do NOT use them;
   they deteriorate from ozone and weathering so fast you risk wrecking
   your car when they break in half while driving! Authenticity can hurt
   you and your wallet.
   Good luck- J DeRyke

   -----Original Message-----
   From: Guido deTomaso <guido_detomaso at prodigy.net>
   To: Michael Shortt <michaelsavga at gmail.com>; detomaso
   <detomaso at poca.com>
   Sent: Mon, Jan 11, 2016 12:27 pm
   Subject: Re: [DeTomaso] Campagnolo Wheels
   Well, from what I recently learned, I ought to be looking for "flat
   pentagon" with "medium" lug wrench reliefs, though I might go for
   "large" lug reliefs if they came my way. That way also I could tell
   one set from the other, forever.
   While we're in the 'hood, what is the correct valve stem and are they
   available ?
   GD
   __________________________________________________________________
   From: Michael Shortt <[1]michaelsavga at gmail.com>
   To: [2]detomaso at poca.com
   Sent: Friday, January 8, 2016 9:17 PM
   Subject: [DeTomaso] Campagnolo Wheels
   Greetings,
   After gathering all my wheels in one place and a brief inventory
   today,
   I have 21 Campy wheels,
   5 Single Slots and a mixture of the 4 Double Slots and Zero Triple
   Slots ( No 10") Plus 2 sets of 17" Boyd Coddington Wheels made for
   Hall
   Pantera.
   And the 17" 10 spokes on the car now with 335/35 and 245/40.
   I am keeping the 10 spokes with PZeros for Street use,
   And one set of the 17" Hall Wheels with 315/235 Kumhos for Rally and
   Track use.
   I will be keeping the Single Slots for Concours with skinny
   Blackwalls
   and a set of Double Slots with Vintage Arrivas for Photos, With a
   spare
   Front and a Spare Rear in case of a boo boo.
   That leaves 2 full sets of double slot wheels to dispose of. Sell or
   Trade. Photos Available.
   I'd love a Triple Slot set. Anybody have some?
   Any trade offers?
   I will sort them this week by design, Thanks Mike Drew for the Campy
   Wheel education.
   Michael Shortt
   Just let a local guy soda blast two of them down to the green primer,
   I'll probably paint them Argent Silver and Clear them just to see the
   final results.
   Photo attached.
   _______________________________________________
   Detomaso Forum Managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [1][3]DeTomaso at poca.com
   [2][4]http://poca.com/mailman/listinfo/detomaso_poca.com
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   References
   1. [5]mailto:DeTomaso at poca.com
   2. [6]http://poca.com/mailman/listinfo/detomaso_poca.com
   _______________________________________________
   Detomaso Forum Managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [7]DeTomaso at poca.com
   [8]http://poca.com/mailman/listinfo/detomaso_poca.com
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.

References

   1. mailto:michaelsavga at gmail.com
   2. mailto:detomaso at poca.com
   3. mailto:DeTomaso at poca.com
   4. http://poca.com/mailman/listinfo/detomaso_poca.com
   5. mailto:DeTomaso at poca.com?
   6. http://poca.com/mailman/listinfo/detomaso_poca.com
   7. mailto:DeTomaso at poca.com
   8. http://poca.com/mailman/listinfo/detomaso_poca.com