[DeTomaso] MSD distributor
Forest Goodhart
forestg at att.net
Wed Feb 3 18:50:42 EST 2016
JimFor a non roller cam use a stock cast iron gear.Forest
From: Jim Gray <grayjim at att.net>
To: De Tomaso List <detomaso at poca.com>
Sent: Wednesday, February 3, 2016 2:03 PM
Subject: [DeTomaso] MSD distributor
Folks,
What is the recommended # small-cap MSD distributor for our
more-or-less stock engines. Have aftermarket cam but not a roller.
Running an MSD 6AL with my Duraspark right now but want to make a
switch. Is the bronze gear the best way to go?
Thanks
Jim Gray
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
-------------- next part --------------
Jim
For a non roller cam use a stock cast iron gear.
Forest
__________________________________________________________________
From: Jim Gray <grayjim at att.net>
To: De Tomaso List <detomaso at poca.com>
Sent: Wednesday, February 3, 2016 2:03 PM
Subject: [DeTomaso] MSD distributor
Folks,
What is the recommended # small-cap MSD distributor for our
more-or-less stock engines. Have aftermarket cam but not a roller.
Running an MSD 6AL with my Duraspark right now but want to make a
switch. Is the bronze gear the best way to go?
Thanks
Jim Gray
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[1]DeTomaso at poca.com
[2]http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
References
1. mailto:DeTomaso at poca.com
2. http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list