[DeTomaso] Adhesive

[Stephen]

I use a 3M product - https://www.amazon.com/3M-08008-Black-Weatherstrip-Adhesive/dp/B00063X38M  with good success.  Just redid the crinkle finish on my two side panels and used the 3M stuff to hold the rubber seals on the outer edges – so far are holding great.  Also used it on the rubber seals on the inner fenders – another tough hold situation.

 

Hope this helps.

 

Stephen Nelson

 

 

-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On Behalf Of Jim Gray
Sent: Thursday, December 29, 2016 7:38 AM
To: DeTomaso at server.detomasolist.com
Subject: [DeTomaso] Adhesive

 

Can anyone recommend an adhesive for the rubber weatherstrip that attached to the steel engine cover. For the life of me I have yet to find one that will hold.

Any suggestions welcomeThxJim Gray 

-------------- next part --------------
   I use a 3M product -
   [1]https://www.amazon.com/3M-08008-Black-Weatherstrip-Adhesive/dp/B0006
   3X38M  with good success.  Just redid the crinkle finish on my two side
   panels and used the 3M stuff to hold the rubber seals on the outer
   edges - so far are holding great.  Also used it on the rubber seals on
   the inner fenders - another tough hold situation.


   Hope this helps.


   Stephen Nelson



   -----Original Message-----
   From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On
   Behalf Of Jim Gray
   Sent: Thursday, December 29, 2016 7:38 AM
   To: DeTomaso at server.detomasolist.com
   Subject: [DeTomaso] Adhesive


   Can anyone recommend an adhesive for the rubber weatherstrip that
   attached to the steel engine cover. For the life of me I have yet to
   find one that will hold.

   Any suggestions welcomeThxJim Gray

References

   1. https://www.amazon.com/3M-08008-Black-Weatherstrip-Adhesive/dp/B00063X38M