[DeTomaso] Radiator Dilemma

Jeff Detrich jjdetrich at gmail.com
Wed Aug 10 18:44:23 EDT 2016


I seem to remember that he good folks in Chicago, Gerry Romack in
particular were developing a brass radiator superior to anything else out
there. (At least, according to Gerry.)

Jeff
6559

On Tue, Aug 9, 2016 at 2:23 PM, Jack Donahue <demongusta at gmail.com> wrote:

>    Hey all - I need some good advice on radiators. I currently have a
>    Fluidyne performance unit without a shroud. I've been told that a
>    shroud is a necessity, which I understand. I've had it for about 12
>    years now - no leaks. The rumblings on The List lean towards a unit by
>    Dennis Quella(?) - don't know the correct spelling or the company, but
>    the last I had read from someone was just to get his radiator and "be
>    done with it". I think it was a double-pass (I guess that's good) - and
>    I assume it's shrouded. Another side of me asks - which is better -
>    copper or aluminum? And Why? I know the copper units are heavier, but I
>    am not concerned about extra weight. I am familiar with the company  -
>    Brassworks - they have been at it since the early 1900's. Ken and Lela
>    MacArthur had mentioned Brassworks in July. So - here we go - I know
>    the discussion will generate a fair amount of opinions - which I always
>    welcome, since it will generate more questions too. Looking forward to
>    hearing from all the experts - i know you are out there.
>
>    jack #4348
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
>
-------------- next part --------------
   I seem to remember that he good folks in Chicago, Gerry Romack in
   particular were developing a brass radiator superior to anything else
   out there. (At least, according to Gerry.)
   Jeff
   6559

   On Tue, Aug 9, 2016 at 2:23 PM, Jack Donahue <[1]demongusta at gmail.com>
   wrote:

     A  A Hey all - I need some good advice on radiators. I currently
     have a
     A  A Fluidyne performance unit without a shroud. I've been told that
     a
     A  A shroud is a necessity, which I understand. I've had it for
     about 12
     A  A years now - no leaks. The rumblings on The List lean towards a
     unit by
     A  A Dennis Quella(?) - don't know the correct spelling or the
     company, but
     A  A the last I had read from someone was just to get his radiator
     and "be
     A  A done with it". I think it was a double-pass (I guess that's
     good) - and
     A  A I assume it's shrouded. Another side of me asks - which is
     better -
     A  A copper or aluminum? And Why? I know the copper units are
     heavier, but I
     A  A am not concerned about extra weight. I am familiar with the
     companyA  -
     A  A Brassworks - they have been at it since the early 1900's. Ken
     and Lela
     A  A MacArthur had mentioned Brassworks in July. So - here we go - I
     know
     A  A the discussion will generate a fair amount of opinions - which
     I always
     A  A welcome, since it will generate more questions too. Looking
     forward to
     A  A hearing from all the experts - i know you are out there.
     A  A jack #4348
     _______________________________________________
     Detomaso Email List is not managed by POCA
     Posted emails must not exceed 1.5 Megabytes
     DeTomaso mailing list
     [2]DeTomaso at server.detomasolist.com
     [3]http://server.detomasolist.com/mailman/listinfo/detomaso
     To manage your subscription (change email address, unsubscribe,
     etc.) use the links above.
     Members who post to this list grant license to the list to forward
     any message posted here to all past, current, or future members of
     the list. They also grant the list owner permission to maintain an
     archive or approve the archiving of list messages.

References

   1. mailto:demongusta at gmail.com
   2. mailto:DeTomaso at server.detomasolist.com
   3. http://server.detomasolist.com/mailman/listinfo/detomaso


More information about the DeTomaso mailing list