[DeTomaso] use sight glass in AC that has been retrofitted to 134a?

[Pantdino]

Hi, Jeff,


What should the pressures be?


Thank you,


Jim



-----Original Message-----
From: Jeff Cobb <jeffcobb1 at me.com>
To: Pantdino <pantdino at aol.com>; detomaso <detomaso at detomasolist.com>
Cc: Jeff Cobb <jeffcobb1 at me.com>
Sent: Thu, Aug 4, 2016 6:55 pm
Subject: Re: [DeTomaso] use sight glass in AC that has been retrofitted to 134a?

The sight glass is always used as a reference point. You must go by the dual gauges.
Never by the low side only.

Jeff Cobb

On Aug 4, 2016, at 8:44 PM, Pantdino via DeTomaso <detomaso at server.detomasolist.com> wrote:

>   After switching the AC system to 134a, do you use the sight glass in
>   the dryer or go by the pressure at the low pressure port like with
>   modern cars?
> 
>   Sorry, but I don't recall what I learned several years ago when I
>   switched the system over.
> 
>   Jim Oddie
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.


-------------- next part --------------
   Hi, Jeff,

   What should the pressures be?

   Thank you,

   Jim
   -----Original Message-----
   From: Jeff Cobb <jeffcobb1 at me.com>
   To: Pantdino <pantdino at aol.com>; detomaso <detomaso at detomasolist.com>
   Cc: Jeff Cobb <jeffcobb1 at me.com>
   Sent: Thu, Aug 4, 2016 6:55 pm
   Subject: Re: [DeTomaso] use sight glass in AC that has been retrofitted
   to 134a?
   The sight glass is always used as a reference point. You must go by the
   dual gauges.
   Never by the low side only.
   Jeff Cobb
   On Aug 4, 2016, at 8:44 PM, Pantdino via DeTomaso
   <[1]detomaso at server.detomasolist.com> wrote:
   > After switching the AC system to 134a, do you use the sight glass in
   > the dryer or go by the pressure at the low pressure port like with
   > modern cars?
   >
   > Sorry, but I don't recall what I learned several years ago when I
   > switched the system over.
   >
   > Jim Oddie
   > _______________________________________________
   >
   >
   > Detomaso Email List is not managed by POCA
   > Posted emails must not exceed 1.5 Megabytes
   > DeTomaso mailing list
   > [2]DeTomaso at server.detomasolist.com
   > [3]http://server.detomasolist.com/mailman/listinfo/detomaso
   >
   > To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   >
   > Members who post to this list grant license to the list to forward
   any message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. mailto:detomaso at server.detomasolist.com
   2. mailto:DeTomaso at server.detomasolist.com
   3. http://server.detomasolist.com/mailman/listinfo/detomaso