[DeTomaso] Wheels???
Himes, Terry (397C)
terry.himes at jpl.nasa.gov
Sat Oct 31 16:02:25 EDT 2015
Sweet! Normally I like the original wheels but those are nice!
"Sometimes I think the surest signs that intelligent life
exists elsewhere in the universe is that none of it has tried
to contact us!"
Terry W. Himes
JPL Jet Propulsion Laboratory
InSight Sequence Team Lead
Rosetta/MEX Sequence Team Lead
Phone: (818) 393-6261
Cell: (818) 653-8213
Fax: (818) 393-3147
thimes at jpl.nasa.gov<mailto:thimes at jpl.nasa.gov>
🇺🇸
From: DeTomaso <detomaso-bounces at poca.com<mailto:detomaso-bounces at poca.com>> on behalf of Mark Charlton <pantera01826 at rogers.com<mailto:pantera01826 at rogers.com>>
Date: Saturday, October 31, 2015 10:59 AM
To: Ken Green <kenn_green at yahoo.com<mailto:kenn_green at yahoo.com>>
Cc: POCA <detomaso at poca.com<mailto:detomaso at poca.com>>
Subject: Re: [DeTomaso] Wheels???
Not sure if this photo will come through, but this is how the 20-spokes would look on my car.
Mark Charlton
pantera01826 at rogers.com<mailto:pantera01826 at rogers.com>
On Oct 31, 2015, at 10:04 AM, Ken Green via DeTomaso <detomaso at poca.com<mailto:detomaso at poca.com>> wrote:
Hi Tom,
I may have mentioned this, but if I didn't, I have a plan to get
things moving forward on the Panteras. I want to get the suspension
wheels and tires, on the 72, along with all the rest of the parts I can
(engine block & heads, ZF, etc.) and get it on the lift, and get the 73
on the floor. Then I can get back to work on the 73. It has been just
too hard to make progress with the 73 on the lift, just takes too much
time.
To do this, I need to get a set of wheels for the 72. I want to
use the same size as I have on the 73, which is a set of Wilkinson
17/18 wheels. I have a client who owes me a favor, and is in the wheel
business and friends with Chris Coddington. Chris has a couple wheel
designs I like that can be made with a desired offset to fit, but I
need to pick one. I was tending to the 20 spoke design, but now I think
I like the wheel with 5 pairs of spokes better. It seems a little more
masculine? The 20 spoke seems a little to fancy? What do you think?
Inline image
Inline image
<HR22.jpg><HR01.jpg>_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at poca.com<mailto:DeTomaso at poca.com>
http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
-------------- next part --------------
Sweet! Normally I like the original wheels but those are nice!
"Sometimes I think the surest signs that intelligent life
exists elsewhere in the universe is that none of it has tried
to contact us!"
Terry W. Himes
JPL Jet Propulsion Laboratory
InSight Sequence Team Lead
Rosetta/MEX Sequence Team Lead
Phone: (818) 393-6261
Cell: (818) 653-8213
Fax: (818) 393-3147
[1]thimes at jpl.nasa.gov
From: DeTomaso <[2]detomaso-bounces at poca.com> on behalf of Mark
Charlton <[3]pantera01826 at rogers.com>
Date: Saturday, October 31, 2015 10:59 AM
To: Ken Green <[4]kenn_green at yahoo.com>
Cc: POCA <[5]detomaso at poca.com>
Subject: Re: [DeTomaso] Wheels???
Not sure if this photo will come through, but this is how the 20-spokes
would look on my car.
Mark Charlton
[6]pantera01826 at rogers.com
On Oct 31, 2015, at 10:04 AM, Ken Green via DeTomaso
<[7]detomaso at poca.com> wrote:
Hi Tom,
I may have mentioned this, but if I didn't, I have a plan to get
things moving forward on the Panteras. I want to get the suspension
wheels and tires, on the 72, along with all the rest of the parts I
can
(engine block & heads, ZF, etc.) and get it on the lift, and get the
73
on the floor. Then I can get back to work on the 73. It has been
just
too hard to make progress with the 73 on the lift, just takes too
much
time.
To do this, I need to get a set of wheels for the 72. I want to
use the same size as I have on the 73, which is a set of Wilkinson
17/18 wheels. I have a client who owes me a favor, and is in the
wheel
business and friends with Chris Coddington. Chris has a couple
wheel
designs I like that can be made with a desired offset to fit, but I
need to pick one. I was tending to the 20 spoke design, but now I
think
I like the wheel with 5 pairs of spokes better. It seems a little
more
masculine? The 20 spoke seems a little to fancy? What do you
think?
Inline image
Inline image
<HR22.jpg><HR01.jpg>_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[8]DeTomaso at poca.com
[9]http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
References
1. mailto:thimes at jpl.nasa.gov
2. mailto:detomaso-bounces at poca.com
3. mailto:pantera01826 at rogers.com
4. mailto:kenn_green at yahoo.com
5. mailto:detomaso at poca.com
6. mailto:pantera01826 at rogers.com
7. mailto:detomaso at poca.com
8. mailto:DeTomaso at poca.com
9. http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list