[DeTomaso] IR FI system

[Ken Green]

Yates heads were generally sold with small ports and the race teams extensively port them.  Some are tall and some are nearly square.  The intake manifolds are similarly sold with small runners and are matched to the porting, so it's really hard to know if the manifold can be matched to the your heads.
The description of the Speedmaster intake doesn't give any idea (at least I didn't see one) if the ports are 4V, 3V, 2V, Yates, etc. That's raises a suspicion that they are not knowledgeable regarding the variety of heads that can be used on a SBF.
Ken 
       From: Robert Stroj <npdrs at maui.net>
 To: detomaso at poca.com 
 Sent: Friday, October 16, 2015 7:02 PM
 Subject: [DeTomaso] IR FI system
   
Hi, I was wondering if there is someone that tried this system?

http://store.speedmaster79.com/p-4567-ford-302-351c-cleveland-down-draft-efi
-stack-intake-manifold-system-complete-satin.aspx

I realize it comes without ECU and injectors, but looks really nice and
seems very well priced.
It is a bit confusing as at one point they state throttle bodies to be 52mm
and on other point they say bore is 50mm.
I wonder if it could be port matched to my Yates C3 heads.....




_______________________________________________

Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com

To manage your subscription (change email address, unsubscribe, etc.) use the links above.


  
-------------- next part --------------
   Yates heads were generally sold with small ports and the race
   teams extensively port them.  Some are tall and some are nearly
   square.  The intake manifolds are similarly sold with small runners and
   are matched to the porting, so it's really hard to know if the manifold
   can be matched to the your heads.
   The description of the Speedmaster intake doesn't give any idea (at
   least I didn't see one) if the ports are 4V, 3V, 2V, Yates, etc.
   That's raises a suspicion that they are not knowledgeable regarding the
   variety of heads that can be used on a SBF.
   Ken
     __________________________________________________________________

   From: Robert Stroj <npdrs at maui.net>
   To: detomaso at poca.com
   Sent: Friday, October 16, 2015 7:02 PM
   Subject: [DeTomaso] IR FI system
   Hi, I was wondering if there is someone that tried this system?
   [1]http://store.speedmaster79.com/p-4567-ford-302-351c-cleveland-down-d
   raft-efi
   -stack-intake-manifold-system-complete-satin.aspx
   I realize it comes without ECU and injectors, but looks really nice and
   seems very well priced.
   It is a bit confusing as at one point they state throttle bodies to be
   52mm
   and on other point they say bore is 50mm.
   I wonder if it could be port matched to my Yates C3 heads.....
   _______________________________________________
   Detomaso Forum Managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [2]DeTomaso at poca.com
   [3]http://poca.com/mailman/listinfo/detomaso_poca.com
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.

References

   1. http://store.speedmaster79.com/p-4567-ford-302-351c-cleveland-down-draft-efi
   2. mailto:DeTomaso at poca.com
   3. http://poca.com/mailman/listinfo/detomaso_poca.com