[DeTomaso] Rear quarter vents
Mike Drew
MikeLDrew at aol.com
Sat Oct 10 01:43:17 EDT 2015
Ed,
There were three different types of ornaments. The second, and I presume the first style were retained with wing nuts. I would guess they are M4 or M5.
The third style were retained by plastic retainer hoozits.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.jpeg
Type: image/jpeg
Size: 158285 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20151009/bfc92d02/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.jpeg
Type: image/jpeg
Size: 81081 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20151009/bfc92d02/attachment-0001.jpeg>
-------------- next part --------------
I would assume if yours are broken, you could drill and tap a hole and then secure a stud with JB Weld or similar?
Mike
Sent from my iPhone
On Oct 9, 2015, at 20:47, Ed Mendez <edducati at mac.com> wrote:
> Anyone have a picture of the back side of the rear quarter decorative vents? And what is the thread size on the 4 mounting posts supposed to be? 6-8mm? x ?
>
> If the threads on the posts are stripped; it appears to be pot metal, what can you use to fill the holes and re-drill and tap the new threads? JB Weld?
>
> Thanks Ed
>
> Sent from my iPhone 6 Plus
> _______________________________________________
>
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
More information about the DeTomaso
mailing list