[DeTomaso] '74 Taillight Lens
Larry Finch
fresnofinches at aol.com
Mon Nov 30 14:57:34 EST 2015
Rich,
Great minds must think alike?
I have been providing small black rubber O-rings with my restored lights for many years now.
They work great for all the reasons you mentioned.
Larry
Sent from me using a magic, handheld electronic gizmo.
> On Nov 30, 2015, at 11:41 AM, Rich <hoppe1 at cox.net> wrote:
>
> Everyone has their own ideas, so here is mine.
> I bought allen head screws. Metric for the right length and size.
> The head fits in the lense and I added tiny O rings to the allen head screw.
> That way when you tighten them, the O ring acts like a lock washer and keeps them tight but not too tight and they don't come loose.
> Just one of many ways to do it.
> Rich
>
> -----Original Message----- From: Jack DeRyke via DeTomaso
> Sent: Monday, November 30, 2015 12:32 PM
> To: forestg at att.net ; fresnofinches at aol.com ; detomaso at poca.com
> Subject: Re: [DeTomaso] '74 Taillight Lens
>
> Thanks, Forest. I the past, those screws were seldom available from vendors and never at retailers. According to Larry Stock of PPC-Carson City, there are none available now- new OR used. Maybe the more skillful can make their own- J DeRyke
>
>
>
>
>
>
> -----Original Message-----
> From: Forest Goodhart <forestg at att.net>
> To: Larry Finch <fresnofinches at aol.com>; DeTomaso Forum <detomaso at poca.com>
> Sent: Mon, Nov 30, 2015 10:32 am
> Subject: Re: [DeTomaso] '74 Taillight Lens
>
> This is what I use. The head is slightly smaller diameter than a
> standard fillister/cheese head and fits the lens recess. I chuck them
> in the drill press and use a file to remove the threads from the
> portion that resides in the lens body so when they are screwed into the
> lens they become a captured screw like the factory.
>
> Metric JIS Pan Head Phillips Machine Screw
>
> M4 Size, 25mm Length, .7mm Pitch
>
>
> Forest
>
>
>
>
>
>
>
> __________________________________________________________________
>
> From: Larry Finch via DeTomaso <detomaso at poca.com>
> To: DeTomaso Forum <detomaso at poca.com>
> Sent: Monday, November 30, 2015 9:31 AM
> Subject: [DeTomaso] '74 Taillight Lens
> regarding Larry Westonas two sets of tail lights: one with threaded
> machine screws, the other with awooda screws.
> As in all things Pantera, we have come to accept variations in
> assembly/equipment as indicative of factory-created variety.
> What we tend to forget is these cars are FORTY+ years old and until
> just recently they have not been seen as collector-worthy cars. Thus
> repairs made by all the previous owners have not been restricted to
> aoriginalitya.
> I have received used lights from Europe with numerous aincorrecta lens
> screws. Even in metric Europe, folks often tend towards the aIall use
> what I have on-handa repair approaches.
> And here in metric-phobia USA, not many garage coffee cans have 4mm
> phillips, filiister head machine screws.
> The observation that the awood screwa lenses do not show signs of
> screw-hole cracks just tells me that set's lenses are newer than the
> other set. I suspect that set was compiled from housings/lenses some
> time after manufacture, perhaps from different sources, and the P.O.
> fell prey to the ause what I havea option for the lens screws.
> The white nylon washers with the awood screwsa are original to Carello,
> however. They often remain attached to used lenses after the screws
> have been removed.
> Larry - Are all four lenses marked Carello? There are reproduction
> aCarello stylea lenses on the current market - MrFiat and Hall sell
> that version.
> Also, since Jeff had to reduce the diameter of the machine screw heads
> he found I suspect what he used were in fact pan head machine screws.
> The two styles are closely similar, but the fillister style tends to
> have sharper head edges and sides; some fillister head sides are
> totally flat and parallel to the threaded shafts.
> I still do not believe any Carello lights originally came with awood
> screwsa.
> Larry
> _______________________________________________
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [1]DeTomaso at poca.com
> [2]http://poca.com/mailman/listinfo/detomaso_poca.com
> To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
>
> References
>
> 1. mailto:DeTomaso at poca.com
> 2. http://poca.com/mailman/listinfo/detomaso_poca.com
> _______________________________________________
>
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
>
>
>
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
More information about the DeTomaso
mailing list