[DeTomaso] '74 Taillight Lens

[Jeff Detrich]

On Sat, Nov 28, 2015 at 2:16 PM, Larry Finch via DeTomaso <detomaso at poca.com
> wrote:

> For what it is worth, the lens screws used on our  Carello tail light
> lenses, and the Altissimo versions, are properly called:
>
> phillips fillister head machine screws
>


I found these in stainless at a hardware store but the head was just a
little too large to fit in the indent for the screw head. It would have
cracked the lens if I hadn't notice they were too wide. I had to machine
down the head diameter a little to get it to fit.

Jeff
6559
-------------- next part --------------
   On Sat, Nov 28, 2015 at 2:16 PM, Larry Finch via DeTomaso
   <[1]detomaso at poca.com> wrote:

   For what it is worth, the lens screws used on ourA  Carello tail light
   lenses, and the Altissimo versions, are properly called:
   phillips fillister head machine screws

   I found these in stainless at a hardware store but the head was just a
   little too large to fit in the indent for the screw head. It would have
   cracked the lens if I hadn't notice they were too wide. I had to
   machine down the head diameter a little to get it to fit.A
   Jeff
   6559

References

   1. mailto:detomaso at poca.com