[DeTomaso] Bumpsteer Explained

[Tomas Gunnarsson]

Even then it's not a certain success. If the lengths of the control arms
and the tie rod aren't exactly correct in relation to each other you can
have as much bumpsteer as ever before.
 
Tomas

<-----Ursprungligt Meddelande----->

 	  	 From: Guido deTomaso [guido_detomaso at prodigy.net]
Sent: 20/11/2015 1:45:53 AM
To: michaelsavga at gmail.com;detomaso at poca.com
Subject: Re: [DeTomaso] Bumpsteer Explained 


If nothing else, this ought to lay to rest the notion that putting the
tie rod parallel to the ground is always a good idea.  That would only
apply if both the upper and lower control arms were also parallel to the
ground. 
GD 
  From: Michael Shortt <michaelsavga at gmail.com> 
To: detomaso at poca.com 
Sent: Sunday, November 15, 2015 5:43 AM 
Subject: [DeTomaso] Bumpsteer Explained 

  Saw this in another group, thought many here might enjoy it. It really
explains it quite well. 

 
[1]http://www.mustangandfords.com/how-to/chassis-suspension/mufp-0611-b 
  umpsteer-explained/ 

References 

  1.
http://www.mustangandfords.com/how-to/chassis-suspension/mufp-0611-bumps
teer-explained/ 

_______________________________________________ 

Detomaso Forum Managed by POCA 
Posted emails must not exceed 1.5 Megabytes 
DeTomaso mailing list 
DeTomaso at poca.com 
http://poca.com/mailman/listinfo/detomaso_poca.com 

To manage your subscription (change email address, unsubscribe, etc.)
use the links above. 


	
-------------- next part --------------
   Even then it's not a certain success. If the lengths of the control
   arms and the tie rod aren't exactly correct in relation to each other
   you can have as much bumpsteer as ever before.



   Tomas
   <-----Ursprungligt Meddelande----->

       From: Guido deTomaso [guido_detomaso at prodigy.net]
   Sent: 20/11/2015 1:45:53 AM
   To: michaelsavga at gmail.com;detomaso at poca.com
   Subject: Re: [DeTomaso] Bumpsteer Explained
   If nothing else, this ought to lay to rest the notion that putting the
   tie rod parallel to the ground is always a good idea.  That would only
   apply if both the upper and lower control arms were also parallel to
   the ground.
   GD
     From: Michael Shortt <michaelsavga at gmail.com>
   To: detomaso at poca.com
   Sent: Sunday, November 15, 2015 5:43 AM
   Subject: [DeTomaso] Bumpsteer Explained
     Saw this in another group, thought many here might enjoy it. It
   really
     explains it quite well.

   [1]http://www.mustangandfords.com/how-to/chassis-suspension/mufp-0611-b
     umpsteer-explained/
   References
     1.
   http://www.mustangandfords.com/how-to/chassis-suspension/mufp-0611-bump
   steer-explained/
   _______________________________________________
   Detomaso Forum Managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   DeTomaso at poca.com
   http://poca.com/mailman/listinfo/detomaso_poca.com
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.