[DeTomaso] 10x15 Campagnolo Pantera GTS wheels

Larry Weston lplugw at hotmail.com
Thu May 28 15:01:35 EDT 2015 

Ed,
Another question for your guy tonight. Could he create these in 17" diameter?
That would allow a set of four Pirelli assimetricos, 225/50/15 up front, 285/40/17 in the rear (ala George Pence's suggestion) mounted on rims that look like a set. 
Like you did Brian.
 
 

 
From: edducati at mac.com
Date: Thu, 28 May 2015 11:33:26 -0700
To: bd8134 at gmail.com
Subject: Re: [DeTomaso] 10x15 Campagnolo Pantera GTS wheels
CC: detomaso at poca.com

I will verify tonight 
 
Sent from my iPhone 6 Plus
 
> On May 28, 2015, at 11:28, Brian Dudley <bd8134 at gmail.com> wrote:
> 
> What wheel design would these be?
> I would only want the original long-ribbed style.
> 
>> On Thu, May 28, 2015 at 2:22 PM, Ed Mendez <edducati at mac.com> wrote:
>>    He didn't say 30 complete sets he said he would make new molds if we
>>    can get orders for 30 individual wheels and he already has 12 wheels on
>>    order in Europe. So we only need 18 more wheels. So that is just 9
>>    people who want 2 10x15's for the rear. I want 2 so that leaves 8 more
>>    people. :-)
>> 
>>    Ed
>>    Sent from my iPhone 6 Plus
>> 
>>    On May 28, 2015, at 11:16, Asa Jay Laughton <[1]asajay at asajay.com>
>>    wrote:
>> 
>>    Hmmmm, sounds like the exact same deal to me.  $6,560 for a set of four
>>    wheels.  We couldn't put that deal together last time to get 30 sets
>>    made, but I guess this time all our Panteras are worth more now with
>>    the market going up so that means we can better afford to buy these.
>>    Now if we could just get someone to make a variety of 15" tires of the
>>    correct aspect ratio and speed rating...
>>    I guess until then we'll just have to roll on bare rims down the
>>    street.
>>    <whoooops, I'm sorry, did I leave the sarcasm button on again?>
>>    Asa Jay
>>    Sent using Jedi Mind Tricks
>>    Ed Mendez <[2]edducati at mac.com> wrote:
>>    My Friend is Giuvann Fumagalli the owner of Marvic and he is 100%
>>    committed as long as we can get 30 wheels minimum.
>>    So who's in? I am getting one set I have 2 other people so now we only
>>    need about 6 more people.
>>    Ed
>>    Sent from my iPhone 6 Plus
>>    > On May 28, 2015, at 10:12, Julian Kift <[3]julian_kift at hotmail.com>
>>    wrote:
>>    >
>>    > This friend wouldn't be Cesare Magistrali would it?
>>    >
>>    > If it is then I had many an email with Cesare and know he had
>>    drawings (plus some old molds I believe) and was supposedly going to
>>    cast the wide body 10 spoke Campi wheels, but it never went anywhere.
>>    Patrick Hals ended up having them commissioned (via Marvic I think) as
>>    Cesare wanted up front payment and no one was willing to commit to that
>>    sum for 30 sets of wheels, with little to no guarantee of delivery.
>>    >
>>    > Julian
>>    >
>>    > From: [4]edducati at mac.com
>>    > Date: Wed, 27 May 2015 23:50:31 -0700
>>    > To: [5]detomaso at poca.com
>>    > Subject: [DeTomaso] 10x15 Campagnolo Pantera GTS wheels
>>    >
>>    > All,
>>    >
>>    > I have some good news. Hopefully.
>>    >
>>    > I have a friend in Italy who owns a foundry and has the original
>>    drawings from DeTomaso of the 10x15 Pantera GTS wheels and all DeTomaso
>>    wheels ever made including the Mangusta wheels, but we are talking
>>    specifically of the 10x15 GTS wheels at the moment. As pictured.
>>    >
>>    > He can reproduce the wheels to exact specifications in Magnesium with
>>    all the latest technology and materials AZ91 Magnesium Alloy. He said
>>    he can offer them at 1500 Euros each (aprox. $1640usd). Not cheap but
>>    these are new Magnesium not 40 year old Magnesium, and these are not
>>    the aluminum knockoffs on eBay that are sold for $1400 each either.
>>    >
>>    > He currently has orders in Europe for 12 wheels (6 sets), and says if
>>    he gets orders for 30 wheels total (15 sets) he will make the molds at
>>    his expense and produce them. He says he can also produce the 8x15
>>    fronts as well.
>>    >
>>    > I need to know who might be interested.
>>    >
>>    > Please let me know.
>>    >
>>    > Thanks, Ed
>>    >
>>    > Ps. I am not making anything off this just doing it for all of you
>>    out there and I want to buy a set myself because they look bitchin.
>>    >
>>    >
>>    >
>>    >
>>    > Sent from my iPhone 6 Plus
>>    >
>>    > _______________________________________________ Detomaso Forum
>>    Managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso
>>    mailing list [6]DeTomaso at poca.com
>>    [7]http://poca.com/mailman/listinfo/detomaso_poca.com To manage your
>>    subscription (change email address, unsubscribe, etc.) use the links
>>    above.
>>       My Friend is Giuvann Fumagalli the owner of Marvic and he is 100%
>>       committed as long as we can get 30 wheels minimum.
>>       So who's in? I am getting one set I have 2 other people so now we
>>    only
>>       need about 6 more people.
>>       Ed
>>       Sent from my iPhone 6 Plus
>>       On May 28, 2015, at 10:12, Julian Kift
>>    <[1][8]julian_kift at hotmail.com>
>>       wrote:
>>       This friend wouldn't be Cesare Magistrali would it?
>>       If it is then I had many an email with Cesare and know he had
>>    drawings
>>       (plus some old molds I believe) and was supposedly going to cast the
>>       wide body 10 spoke Campi wheels, but it never went anywhere. Patrick
>>       Hals ended up having them commissioned (via Marvic I think) as
>>    Cesare
>>       wanted up front payment and no one was willing to commit to that sum
>>       for 30 sets of wheels, with little to no guarantee of delivery.
>>       Julian
>>       From: [2][9]edducati at mac.com
>>       Date: Wed, 27 May 2015 23:50:31 -0700
>>       To: [3][10]detomaso at poca.com
>>       Subject: [DeTomaso] 10x15 Campagnolo Pantera GTS wheels
>>    All,
>>    I have some good news. Hopefully.
>>    I have a friend in Italy who owns a foundry and has the original
>>    drawings from D
>>    eTomaso of the 10x15 Pantera GTS wheels and all DeTomaso wheels ever
>>    made includ
>>    ing the Mangusta wheels, but we are talking specifically of the 10x15
>>    GTS wheels
>>    at the moment. As pictured.
>>    He can reproduce the wheels to exact specifications in Magnesium with
>>    all the la
>>    test technology and materials AZ91 Magnesium Alloy. He said he can
>>    offer them at
>>    1500 Euros each (aprox. $1640usd). Not cheap but these are new
>>    Magnesium not 40
>>    year old Magnesium, and these are not the aluminum knockoffs on eBay
>>    that are s
>>    old for $1400 each either.
>>    He currently has orders in Europe for 12 wheels (6 sets), and says if
>>    he gets or
>>    ders for 30 wheels total (15 sets) he will make the molds at his
>>    expense and pro
>>    duce them. He says he can also produce the 8x15 fronts as well.
>>    I need to know who might be interested.
>>    Please let me know.
>>    Thanks, Ed
>>    Ps. I am not making anything off this just doing it for all of you out
>>    there and
>>    I want to buy a set myself because they look bitchin.
>>    Sent from my iPhone 6 Plus
>>       _______________________________________________ Detomaso Forum
>>    Managed
>>       by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing
>>       list [4][11]DeTomaso at poca.com
>>       [5][12]http://poca.com/mailman/listinfo/detomaso_poca.com To manage
>>    your
>>       subscription (change email address, unsubscribe, etc.) use the links
>>       above.
>>    References
>>       1. [13]mailto:julian_kift at hotmail.com
>>       2. [14]mailto:edducati at mac.com
>>       3. [15]mailto:detomaso at poca.com
>>       4. [16]mailto:DeTomaso at poca.com
>>       5. [17]http://poca.com/mailman/listinfo/detomaso_poca.com
>>    _______________________________________________
>>    Detomaso Forum Managed by POCA
>>    Posted emails must not exceed 1.5 Megabytes
>>    DeTomaso mailing list
>>    [18]DeTomaso at poca.com
>>    [19]http://poca.com/mailman/listinfo/detomaso_poca.com
>>    To manage your subscription (change email address, unsubscribe, etc.)
>>    use the links above.
>> 
>> References
>> 
>>    1. mailto:asajay at asajay.com
>>    2. mailto:edducati at mac.com
>>    3. mailto:julian_kift at hotmail.com
>>    4. mailto:edducati at mac.com
>>    5. mailto:detomaso at poca.com
>>    6. mailto:DeTomaso at poca.com
>>    7. http://poca.com/mailman/listinfo/detomaso_poca.com
>>    8. mailto:julian_kift at hotmail.com
>>    9. mailto:edducati at mac.com
>>   10. mailto:detomaso at poca.com
>>   11. mailto:DeTomaso at poca.com
>>   12. http://poca.com/mailman/listinfo/detomaso_poca.com
>>   13. mailto:julian_kift at hotmail.com
>>   14. mailto:edducati at mac.com
>>   15. mailto:detomaso at poca.com
>>   16. mailto:DeTomaso at poca.com
>>   17. http://poca.com/mailman/listinfo/detomaso_poca.com
>>   18. mailto:DeTomaso at poca.com
>>   19. http://poca.com/mailman/listinfo/detomaso_poca.com
>> 
>> _______________________________________________
>> 
>> Detomaso Forum Managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> DeTomaso at poca.com
>> http://poca.com/mailman/listinfo/detomaso_poca.com
>> 
>> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 

_______________________________________________

Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com

To manage your subscription (change email address, unsubscribe, etc.) use the links above. 		 	   		  
-------------- next part --------------
   Ed,
   Another question for your guy tonight. Could he create these in 17"
   diameter?
   That would allow a set of four Pirelli assimetricos, 225/50/15 up
   front, 285/40/17 in the rear (ala George Pence's suggestion) mounted on
   rims that look like a set.
   Like you did Brian.



   From: edducati at mac.com
   Date: Thu, 28 May 2015 11:33:26 -0700
   To: bd8134 at gmail.com
   Subject: Re: [DeTomaso] 10x15 Campagnolo Pantera GTS wheels
   CC: detomaso at poca.com
I will verify tonight

Sent from my iPhone 6 Plus

> On May 28, 2015, at 11:28, Brian Dudley <bd8134 at gmail.com> wrote:
>
> What wheel design would these be?
> I would only want the original long-ribbed style.
>
>> On Thu, May 28, 2015 at 2:22 PM, Ed Mendez <edducati at mac.com> wrote:
>>    He didn't say 30 complete sets he said he would make new molds if we
>>    can get orders for 30 individual wheels and he already has 12 wheels on
>>    order in Europe. So we only need 18 more wheels. So that is just 9
>>    people who want 2 10x15's for the rear. I want 2 so that leaves 8 more
>>    people. :-)
>>
>>    Ed
>>    Sent from my iPhone 6 Plus
>>
>>    On May 28, 2015, at 11:16, Asa Jay Laughton <[1]asajay at asajay.com>
>>    wrote:
>>
>>    Hmmmm, sounds like the exact same deal to me.  $6,560 for a set of four
>>    wheels.  We couldn't put that deal together last time to get 30 sets
>>    made, but I guess this time all our Panteras are worth more now with
>>    the market going up so that means we can better afford to buy these.
>>    Now if we could just get someone to make a variety of 15" tires of the
>>    correct aspect ratio and speed rating...
>>    I guess until then we'll just have to roll on bare rims down the
>>    street.
>>    <whoooops, I'm sorry, did I leave the sarcasm button on again?>
>>    Asa Jay
>>    Sent using Jedi Mind Tricks
>>    Ed Mendez <[2]edducati at mac.com> wrote:
>>    My Friend is Giuvann Fumagalli the owner of Marvic and he is 100%
>>    committed as long as we can get 30 wheels minimum.
>>    So who's in? I am getting one set I have 2 other people so now we only
>>    need about 6 more people.
>>    Ed
>>    Sent from my iPhone 6 Plus
>>    > On May 28, 2015, at 10:12, Julian Kift <[3]julian_kift at hotmail.com>
>>    wrote:
>>    >
>>    > This friend wouldn't be Cesare Magistrali would it?
>>    >
>>    > If it is then I had many an email with Cesare and know he had
>>    drawings (plus some old molds I believe) and was supposedly going to
>>    cast the wide body 10 spoke Campi wheels, but it never went anywhere.
>>    Patrick Hals ended up having them commissioned (via Marvic I think) as
>>    Cesare wanted up front payment and no one was willing to commit to that
>>    sum for 30 sets of wheels, with little to no guarantee of delivery.
>>    >
>>    > Julian
>>    >
>>    > From: [4]edducati at mac.com
>>    > Date: Wed, 27 May 2015 23:50:31 -0700
>>    > To: [5]detomaso at poca.com
>>    > Subject: [DeTomaso] 10x15 Campagnolo Pantera GTS wheels
>>    >
>>    > All,
>>    >
>>    > I have some good news. Hopefully.
>>    >
>>    > I have a friend in Italy who owns a foundry and has the original
>>    drawings from DeTomaso of the 10x15 Pantera GTS wheels and all DeTomaso
>>    wheels ever made including the Mangusta wheels, but we are talking
>>    specifically of the 10x15 GTS wheels at the moment. As pictured.
>>    >
>>    > He can reproduce the wheels to exact specifications in Magnesium with
>>    all the latest technology and materials AZ91 Magnesium Alloy. He said
>>    he can offer them at 1500 Euros each (aprox. $1640usd). Not cheap but
>>    these are new Magnesium not 40 year old Magnesium, and these are not
>>    the aluminum knockoffs on eBay that are sold for $1400 each either.
>>    >
>>    > He currently has orders in Europe for 12 wheels (6 sets), and says if
>>    he gets orders for 30 wheels total (15 sets) he will make the molds at
>>    his expense and produce them. He says he can also produce the 8x15
>>    fronts as well.
>>    >
>>    > I need to know who might be interested.
>>    >
>>    > Please let me know.
>>    >
>>    > Thanks, Ed
>>    >
>>    > Ps. I am not making anything off this just doing it for all of you
>>    out there and I want to buy a set myself because they look bitchin.
>>    >
>>    >
>>    >
>>    >
>>    > Sent from my iPhone 6 Plus
>>    >
>>    > _______________________________________________ Detomaso Forum
>>    Managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso
>>    mailing list [6]DeTomaso at poca.com
>>    [7][1]http://poca.com/mailman/listinfo/detomaso_poca.com To manage your
>>    subscription (change email address, unsubscribe, etc.) use the links
>>    above.
>>       My Friend is Giuvann Fumagalli the owner of Marvic and he is 100%
>>       committed as long as we can get 30 wheels minimum.
>>       So who's in? I am getting one set I have 2 other people so now we
>>    only
>>       need about 6 more people.
>>       Ed
>>       Sent from my iPhone 6 Plus
>>       On May 28, 2015, at 10:12, Julian Kift
>>    <[1][8]julian_kift at hotmail.com>
>>       wrote:
>>       This friend wouldn't be Cesare Magistrali would it?
>>       If it is then I had many an email with Cesare and know he had
>>    drawings
>>       (plus some old molds I believe) and was supposedly going to cast the
>>       wide body 10 spoke Campi wheels, but it never went anywhere. Patrick
>>       Hals ended up having them commissioned (via Marvic I think) as
>>    Cesare
>>       wanted up front payment and no one was willing to commit to that sum
>>       for 30 sets of wheels, with little to no guarantee of delivery.
>>       Julian
>>       From: [2][9]edducati at mac.com
>>       Date: Wed, 27 May 2015 23:50:31 -0700
>>       To: [3][10]detomaso at poca.com
>>       Subject: [DeTomaso] 10x15 Campagnolo Pantera GTS wheels
>>    All,
>>    I have some good news. Hopefully.
>>    I have a friend in Italy who owns a foundry and has the original
>>    drawings from D
>>    eTomaso of the 10x15 Pantera GTS wheels and all DeTomaso wheels ever
>>    made includ
>>    ing the Mangusta wheels, but we are talking specifically of the 10x15
>>    GTS wheels
>>    at the moment. As pictured.
>>    He can reproduce the wheels to exact specifications in Magnesium with
>>    all the la
>>    test technology and materials AZ91 Magnesium Alloy. He said he can
>>    offer them at
>>    1500 Euros each (aprox. $1640usd). Not cheap but these are new
>>    Magnesium not 40
>>    year old Magnesium, and these are not the aluminum knockoffs on eBay
>>    that are s
>>    old for $1400 each either.
>>    He currently has orders in Europe for 12 wheels (6 sets), and says if
>>    he gets or
>>    ders for 30 wheels total (15 sets) he will make the molds at his
>>    expense and pro
>>    duce them. He says he can also produce the 8x15 fronts as well.
>>    I need to know who might be interested.
>>    Please let me know.
>>    Thanks, Ed
>>    Ps. I am not making anything off this just doing it for all of you out
>>    there and
>>    I want to buy a set myself because they look bitchin.
>>    Sent from my iPhone 6 Plus
>>       _______________________________________________ Detomaso Forum
>>    Managed
>>       by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing
>>       list [4][11]DeTomaso at poca.com
>>       [5][12][2]http://poca.com/mailman/listinfo/detomaso_poca.com To manage
>>    your
>>       subscription (change email address, unsubscribe, etc.) use the links
>>       above.
>>    References
>>       1. [13]mailto:julian_kift at hotmail.com
>>       2. [14]mailto:edducati at mac.com
>>       3. [15]mailto:detomaso at poca.com
>>       4. [16]mailto:DeTomaso at poca.com
>>       5. [17][3]http://poca.com/mailman/listinfo/detomaso_poca.com
>>    _______________________________________________
>>    Detomaso Forum Managed by POCA
>>    Posted emails must not exceed 1.5 Megabytes
>>    DeTomaso mailing list
>>    [18]DeTomaso at poca.com
>>    [19][4]http://poca.com/mailman/listinfo/detomaso_poca.com
>>    To manage your subscription (change email address, unsubscribe, etc.)
>>    use the links above.
>>
>> References
>>
>>    1. mailto:asajay at asajay.com
>>    2. mailto:edducati at mac.com
>>    3. mailto:julian_kift at hotmail.com
>>    4. mailto:edducati at mac.com
>>    5. mailto:detomaso at poca.com
>>    6. mailto:DeTomaso at poca.com
>>    7. [5]http://poca.com/mailman/listinfo/detomaso_poca.com
>>    8. mailto:julian_kift at hotmail.com
>>    9. mailto:edducati at mac.com
>>   10. mailto:detomaso at poca.com
>>   11. mailto:DeTomaso at poca.com
>>   12. [6]http://poca.com/mailman/listinfo/detomaso_poca.com
>>   13. mailto:julian_kift at hotmail.com
>>   14. mailto:edducati at mac.com
>>   15. mailto:detomaso at poca.com
>>   16. mailto:DeTomaso at poca.com
>>   17. [7]http://poca.com/mailman/listinfo/detomaso_poca.com
>>   18. mailto:DeTomaso at poca.com
>>   19. [8]http://poca.com/mailman/listinfo/detomaso_poca.com
>>
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> DeTomaso at poca.com
>> [9]http://poca.com/mailman/listinfo/detomaso_poca.com
>>
>> To manage your subscription (change email address, unsubscribe, etc.) use the
 links above.
>

   _______________________________________________ Detomaso Forum Managed
   by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing
   list DeTomaso at poca.com
   http://poca.com/mailman/listinfo/detomaso_poca.com To manage your
   subscription (change email address, unsubscribe, etc.) use the links
   above.

References

   1. http://poca.com/mailman/listinfo/detomaso_poca.com
   2. http://poca.com/mailman/listinfo/detomaso_poca.com
   3. http://poca.com/mailman/listinfo/detomaso_poca.com
   4. http://poca.com/mailman/listinfo/detomaso_poca.com
   5. http://poca.com/mailman/listinfo/detomaso_poca.com
   6. http://poca.com/mailman/listinfo/detomaso_poca.com
   7. http://poca.com/mailman/listinfo/detomaso_poca.com
   8. http://poca.com/mailman/listinfo/detomaso_poca.com
   9. http://poca.com/mailman/listinfo/detomaso_poca.com

More information about the DeTomaso mailing list