[DeTomaso] 10x15 Campagnolo Pantera GTS wheels
Asa Jay Laughton
asajay at asajay.com
Thu May 28 14:16:31 EDT 2015
Hmmmm, sounds like the exact same deal to me. $6,560 for a set of four wheels. We couldn't put that deal together last time to get 30 sets made, but I guess this time all our Panteras are worth more now with the market going up so that means we can better afford to buy these.
Now if we could just get someone to make a variety of 15" tires of the correct aspect ratio and speed rating...
I guess until then we'll just have to roll on bare rims down the street.
<whoooops, I'm sorry, did I leave the sarcasm button on again?>
Asa Jay
Sent using Jedi Mind Tricks
Ed Mendez <edducati at mac.com> wrote:
>My Friend is Giuvann Fumagalli the owner of Marvic and he is 100% committed as long as we can get 30 wheels minimum.
>
>So who's in? I am getting one set I have 2 other people so now we only need about 6 more people.
>
>Ed
>
>
>
>Sent from my iPhone 6 Plus
>
>> On May 28, 2015, at 10:12, Julian Kift <julian_kift at hotmail.com> wrote:
>>
>> This friend wouldn't be Cesare Magistrali would it?
>>
>> If it is then I had many an email with Cesare and know he had drawings (plus some old molds I believe) and was supposedly going to cast the wide body 10 spoke Campi wheels, but it never went anywhere. Patrick Hals ended up having them commissioned (via Marvic I think) as Cesare wanted up front payment and no one was willing to commit to that sum for 30 sets of wheels, with little to no guarantee of delivery.
>>
>> Julian
>>
>> From: edducati at mac.com
>> Date: Wed, 27 May 2015 23:50:31 -0700
>> To: detomaso at poca.com
>> Subject: [DeTomaso] 10x15 Campagnolo Pantera GTS wheels
>>
>> All,
>>
>> I have some good news. Hopefully.
>>
>> I have a friend in Italy who owns a foundry and has the original drawings from DeTomaso of the 10x15 Pantera GTS wheels and all DeTomaso wheels ever made including the Mangusta wheels, but we are talking specifically of the 10x15 GTS wheels at the moment. As pictured.
>>
>> He can reproduce the wheels to exact specifications in Magnesium with all the latest technology and materials AZ91 Magnesium Alloy. He said he can offer them at 1500 Euros each (aprox. $1640usd). Not cheap but these are new Magnesium not 40 year old Magnesium, and these are not the aluminum knockoffs on eBay that are sold for $1400 each either.
>>
>> He currently has orders in Europe for 12 wheels (6 sets), and says if he gets orders for 30 wheels total (15 sets) he will make the molds at his expense and produce them. He says he can also produce the 8x15 fronts as well.
>>
>> I need to know who might be interested.
>>
>> Please let me know.
>>
>> Thanks, Ed
>>
>> Ps. I am not making anything off this just doing it for all of you out there and I want to buy a set myself because they look bitchin.
>>
>>
>>
>>
>> Sent from my iPhone 6 Plus
>>
>> _______________________________________________ Detomaso Forum Managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso at poca.com http://poca.com/mailman/listinfo/detomaso_poca.com To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> My Friend is Giuvann Fumagalli the owner of Marvic and he is 100%
> committed as long as we can get 30 wheels minimum.
>
> So who's in? I am getting one set I have 2 other people so now we only
> need about 6 more people.
>
> Ed
>
> Sent from my iPhone 6 Plus
>
> On May 28, 2015, at 10:12, Julian Kift <[1]julian_kift at hotmail.com>
> wrote:
>
> This friend wouldn't be Cesare Magistrali would it?
> If it is then I had many an email with Cesare and know he had drawings
> (plus some old molds I believe) and was supposedly going to cast the
> wide body 10 spoke Campi wheels, but it never went anywhere. Patrick
> Hals ended up having them commissioned (via Marvic I think) as Cesare
> wanted up front payment and no one was willing to commit to that sum
> for 30 sets of wheels, with little to no guarantee of delivery.
> Julian
> From: [2]edducati at mac.com
> Date: Wed, 27 May 2015 23:50:31 -0700
> To: [3]detomaso at poca.com
> Subject: [DeTomaso] 10x15 Campagnolo Pantera GTS wheels
>All,
>
>I have some good news. Hopefully.
>
>I have a friend in Italy who owns a foundry and has the original drawings from D
>eTomaso of the 10x15 Pantera GTS wheels and all DeTomaso wheels ever made includ
>ing the Mangusta wheels, but we are talking specifically of the 10x15 GTS wheels
> at the moment. As pictured.
>
>He can reproduce the wheels to exact specifications in Magnesium with all the la
>test technology and materials AZ91 Magnesium Alloy. He said he can offer them at
> 1500 Euros each (aprox. $1640usd). Not cheap but these are new Magnesium not 40
> year old Magnesium, and these are not the aluminum knockoffs on eBay that are s
>old for $1400 each either.
>
>He currently has orders in Europe for 12 wheels (6 sets), and says if he gets or
>ders for 30 wheels total (15 sets) he will make the molds at his expense and pro
>duce them. He says he can also produce the 8x15 fronts as well.
>
>I need to know who might be interested.
>
>Please let me know.
>
>Thanks, Ed
>
>Ps. I am not making anything off this just doing it for all of you out there and
> I want to buy a set myself because they look bitchin.
>
>
>
>
>Sent from my iPhone 6 Plus
>
> _______________________________________________ Detomaso Forum Managed
> by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing
> list [4]DeTomaso at poca.com
> [5]http://poca.com/mailman/listinfo/detomaso_poca.com To manage your
> subscription (change email address, unsubscribe, etc.) use the links
> above.
>
>References
>
> 1. mailto:julian_kift at hotmail.com
> 2. mailto:edducati at mac.com
> 3. mailto:detomaso at poca.com
> 4. mailto:DeTomaso at poca.com
> 5. http://poca.com/mailman/listinfo/detomaso_poca.com
>
>_______________________________________________
>
>Detomaso Forum Managed by POCA
>Posted emails must not exceed 1.5 Megabytes
>DeTomaso mailing list
>DeTomaso at poca.com
>http://poca.com/mailman/listinfo/detomaso_poca.com
>
>To manage your subscription (change email address, unsubscribe, etc.) use the links above.
-------------- next part --------------
Hmmmm, sounds like the exact same deal to me. $6,560 for a set of four
wheels. We couldn't put that deal together last time to get 30 sets
made, but I guess this time all our Panteras are worth more now with
the market going up so that means we can better afford to buy these.
Now if we could just get someone to make a variety of 15" tires of the
correct aspect ratio and speed rating...
I guess until then we'll just have to roll on bare rims down the
street.
<whoooops, I'm sorry, did I leave the sarcasm button on again?>
Asa Jay
Sent using Jedi Mind Tricks
Ed Mendez <edducati at mac.com> wrote:
My Friend is Giuvann Fumagalli the owner of Marvic and he is 100%
committed as long as we can get 30 wheels minimum.
So who's in? I am getting one set I have 2 other people so now we only
need about 6 more people.
Ed
Sent from my iPhone 6 Plus
> On May 28, 2015, at 10:12, Julian Kift <julian_kift at hotmail.com>
wrote:
>
> This friend wouldn't be Cesare Magistrali would it?
>
> If it is then I had many an email with Cesare and know he had
drawings (plus some old molds I believe) and was supposedly going to
cast the wide body 10 spoke Campi wheels, but it never went anywhere.
Patrick Hals ended up having them commissioned (via Marvic I think) as
Cesare wanted up front payment and no one was willing to commit to that
sum for 30 sets of wheels, with little to no guarantee of delivery.
>
> Julian
>
> From: edducati at mac.com
> Date: Wed, 27 May 2015 23:50:31 -0700
> To: detomaso at poca.com
> Subject: [DeTomaso] 10x15 Campagnolo Pantera GTS wheels
>
> All,
>
> I have some good news. Hopefully.
>
> I have a friend in Italy who owns a foundry and has the original
drawings from DeTomaso of the 10x15 Pantera GTS wheels and all DeTomaso
wheels ever made including the Mangusta wheels, but we are talking
specifically of the 10x15 GTS wheels at the moment. As pictured.
>
> He can reproduce the wheels to exact specifications in Magnesium with
all the latest technology and materials AZ91 Magnesium Alloy. He said
he can offer them at 1500 Euros each (aprox. $1640usd). Not cheap but
these are new Magnesium not 40 year old Magnesium, and these are not
the aluminum knockoffs on eBay that are sold for $1400 each either.
>
> He currently has orders in Europe for 12 wheels (6 sets), and says if
he gets orders for 30 wheels total (15 sets) he will make the molds at
his expense and produce them. He says he can also produce the 8x15
fronts as well.
>
> I need to know who might be interested.
>
> Please let me know.
>
> Thanks, Ed
>
> Ps. I am not making anything off this just doing it for all of you
out there and I want to buy a set myself because they look bitchin.
>
>
>
>
> Sent from my iPhone 6 Plus
>
> _______________________________________________ Detomaso Forum
Managed by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso
mailing list DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com To manage your
subscription (change email address, unsubscribe, etc.) use the links
above.
My Friend is Giuvann Fumagalli the owner of Marvic and he is 100%
committed as long as we can get 30 wheels minimum.
So who's in? I am getting one set I have 2 other people so now we
only
need about 6 more people.
Ed
Sent from my iPhone 6 Plus
On May 28, 2015, at 10:12, Julian Kift <[1]julian_kift at hotmail.com>
wrote:
This friend wouldn't be Cesare Magistrali would it?
If it is then I had many an email with Cesare and know he had
drawings
(plus some old molds I believe) and was supposedly going to cast the
wide body 10 spoke Campi wheels, but it never went anywhere. Patrick
Hals ended up having them commissioned (via Marvic I think) as
Cesare
wanted up front payment and no one was willing to commit to that sum
for 30 sets of wheels, with little to no guarantee of delivery.
Julian
From: [2]edducati at mac.com
Date: Wed, 27 May 2015 23:50:31 -0700
To: [3]detomaso at poca.com
Subject: [DeTomaso] 10x15 Campagnolo Pantera GTS wheels
All,
I have some good news. Hopefully.
I have a friend in Italy who owns a foundry and has the original
drawings from D
eTomaso of the 10x15 Pantera GTS wheels and all DeTomaso wheels ever
made includ
ing the Mangusta wheels, but we are talking specifically of the 10x15
GTS wheels
at the moment. As pictured.
He can reproduce the wheels to exact specifications in Magnesium with
all the la
test technology and materials AZ91 Magnesium Alloy. He said he can
offer them at
1500 Euros each (aprox. $1640usd). Not cheap but these are new
Magnesium not 40
year old Magnesium, and these are not the aluminum knockoffs on eBay
that are s
old for $1400 each either.
He currently has orders in Europe for 12 wheels (6 sets), and says if
he gets or
ders for 30 wheels total (15 sets) he will make the molds at his
expense and pro
duce them. He says he can also produce the 8x15 fronts as well.
I need to know who might be interested.
Please let me know.
Thanks, Ed
Ps. I am not making anything off this just doing it for all of you out
there and
I want to buy a set myself because they look bitchin.
Sent from my iPhone 6 Plus
_______________________________________________ Detomaso Forum
Managed
by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing
list [4]DeTomaso at poca.com
[5]http://poca.com/mailman/listinfo/detomaso_poca.com To manage your
subscription (change email address, unsubscribe, etc.) use the links
above.
References
1. mailto:julian_kift at hotmail.com
2. mailto:edducati at mac.com
3. mailto:detomaso at poca.com
4. mailto:DeTomaso at poca.com
5. http://poca.com/mailman/listinfo/detomaso_poca.com
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
More information about the DeTomaso
mailing list