[DeTomaso] How do y'all polish your fuses?
Michael Shortt
michaelsavga at gmail.com
Sun Mar 8 11:53:36 EDT 2015
You could take a q-tip and lightly coat the ends with di-electric grease.
Michael Shortt
On Mar 8, 2015 11:45 AM, "Charles McCall" <charlesmccall at gmail.com> wrote:
> Hi all
>
>
> Several times over the past year or two an electrical circuit has
> stopped working. The solution has been extremely technical and
> complicated - I've rotated the fuse in the fuse-holder and the circuit
> has started working again.
>
>
> I'm assuming that what is happening is that the fuses are getting
> slowly covered in some sort of oxidation, and rotating the fuses cuts
> through this crud allowing good contact to be made again and the
> circuit works as normal. It's a gorgeous spring day here, so I'm doing
> basic things - checking coolant level, checking oil level, and rotating
> my fuses. My A/C now works again, while it didn't before the rotating
> exercise.
>
>
> Is there some product that one may spray on fuses and fuse holders to
> improve conductivity, or prevent whatever oxidation is occurring? I'm
> nervous about spraying and liquid on electrical connections, especially
> one that is designed to conduct easily. Anyone have a similar
> experience? Should I simply buy new fuses every 2 years or so? Any
> other suggestions?
>
>
> Thanks!
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
>
-------------- next part --------------
You could take a q-tip and lightly coat the ends with di-electric
grease.
Michael Shortt
On Mar 8, 2015 11:45 AM, "Charles McCall" <[1]charlesmccall at gmail.com>
wrote:
A A Hi all
A A Several times over the past year or two an electrical circuit
has
A A stopped working. The solution has been extremely technical and
A A complicated - I've rotated the fuse in the fuse-holder and the
circuit
A A has started working again.
A A I'm assuming that what is happening is that the fuses are
getting
A A slowly covered in some sort of oxidation, and rotating the
fuses cuts
A A through this crud allowing good contact to be made again and
the
A A circuit works as normal. It's a gorgeous spring day here, so
I'm doing
A A basic things - checking coolant level, checking oil level, and
rotating
A A my fuses. My A/C now works again, while it didn't before the
rotating
A A exercise.
A A Is there some product that one may spray on fuses and fuse
holders to
A A improve conductivity, or prevent whatever oxidation is
occurring? I'm
A A nervous about spraying and liquid on electrical connections,
especially
A A one that is designed to conduct easily. Anyone have a similar
A A experience? Should I simply buy new fuses every 2 years or so?
Any
A A other suggestions?
A A Thanks!
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[2]DeTomaso at poca.com
[3]http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
References
1. mailto:charlesmccall at gmail.com
2. mailto:DeTomaso at poca.com
3. http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list