[DeTomaso] Rear accessory engine bay brace

Mike Drew MikeLDrew at aol.com
Sun Jun 21 22:54:29 EDT 2015


Julian,

You're right!  I think it's the lower part of the upper half--and thus just what Chuck was looking for. Well-spotted sir!

Mike

Sent from my iPhone

On Jun 21, 2015, at 19:51, Julian Kift <julian_kift at hotmail.com> wrote:

>   Mike,
>   Although it may be listed as upper I'm not so sure, why would it have
>   the end plates if its the upper? And as you say the upper was square
>   tube, lower round.
>   Julian
>     __________________________________________________________________
> 
>   CC: cengles at cox.net; detomaso at poca.com
>   From: MikeLDrew at aol.com
>   Subject: Re: [DeTomaso] Rear accessory engine bay brace
>   Date: Sun, 21 Jun 2015 19:45:58 -0700
>   To: julian_kift at hotmail.com
>   Julian,
>   That's the upper. He's looking for the lower part (of the upper
>   assembly)
>   Mike
>   Sent from my iPhone
>   On Jun 21, 2015, at 19:30, Julian Kift <[1]julian_kift at hotmail.com>
>   wrote:
> 
>   I believe this is what ye seek;
>   [2]http://hallpantera.com/cgi-bin/p/awtp-product.cgi?d=hallpantera-inc&
>   item=22695
>   Julian
>> Date: Sun, 21 Jun 2015 19:11:52 -0700
>> To: [3]cengles at cox.net
>> Subject: Re: [DeTomaso] Rear accessory engine bay brace
>> From: [4]detomaso at poca.com
>> CC: [5]detomaso at poca.com
>> 
>> Chuck,
>> 
>> I think Hall sells the individual pieces. I know Byars does not.
>> 
>> Mike
>> 
>> Sent from my iPhone
>> 
>> On Jun 21, 2015, at 19:05, "Charles Engles" <[6]cengles at cox.net>
>   wrote:
>> 
>>> Dear Forum,
>>> 
>>> 
>>> 
>>> Maybe the picture will come through.
>>> I am trying to find an accessory rear engine bay brace like the one
>   in
>>> the picture. Does anyone know if the vendors still offer it? When I
>>> checked recently, it didn't seem to be available and the only thing
>>> that was available was the complete front-rear-top-bottom Pantera
>>> chassis stiffening kit. No pieces sold separately. I would like to
>>> find one.
>>> 
>>> 
>>> 
>>> Warmest regards,
>>> Chuck Engles
>>> <DSC_0004 (2).JPG>
>>> _______________________________________________
>>> 
>>> Detomaso Forum Managed by POCA
>>> Posted emails must not exceed 1.5 Megabytes
>>> DeTomaso mailing list
>>> [7]DeTomaso at poca.com
>>> [8]http://poca.com/mailman/listinfo/detomaso_poca.com
>>> 
>>> To manage your subscription (change email address, unsubscribe,
>   etc.) use the links above.
>> 
>> _______________________________________________
>> 
>> Detomaso Forum Managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [9]DeTomaso at poca.com
>> [10]http://poca.com/mailman/listinfo/detomaso_poca.com
>> 
>> To manage your subscription (change email address, unsubscribe, etc.)
>   use the links above.
> 
> References
> 
>   1. mailto:julian_kift at hotmail.com
>   2. http://hallpantera.com/cgi-bin/p/awtp-product.cgi?d=hallpantera-inc&item=22695
>   3. mailto:cengles at cox.net
>   4. mailto:detomaso at poca.com
>   5. mailto:detomaso at poca.com
>   6. mailto:cengles at cox.net
>   7. mailto:DeTomaso at poca.com
>   8. http://poca.com/mailman/listinfo/detomaso_poca.com
>   9. mailto:DeTomaso at poca.com
>  10. http://poca.com/mailman/listinfo/detomaso_poca.com
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.




More information about the DeTomaso mailing list