[DeTomaso] Clutch Line Flaring
gow2 at rc-tech.net
gow2 at rc-tech.net
Wed Jun 10 21:30:49 EDT 2015
I second using a quality flair tool.
> I have one of those too. It is so simple, but it is amazing how well it
> works. I think I got mine from Eastwood.
>
> --
> Will
>
>
>
>
>
> On 6/10/15 12:11 AM, "Julian Kift" <julian_kift at hotmail.com> wrote:
>
>> After getting frustrated with the cheaper tools I invested in a
>> Brakequip BQ350, it does both 45 and 37 degree single, double and
>> bubble flares. You absolutely need one of these professional tools if
>> you are attempting stainless lines.
>> Since I purchased mine some years ago Eastwood carry the
>> recommended (and slightly cheaper) equivalent, although it looks like
>> you need to purchase the 37 degree flare die kit separately.
>> [1]http://www.eastwood.com/professional-brake-tubing-flaring-tool.html
>> Julian
>> > From: mbefthomas at comcast.net
>> > To: detomaso at poca.com
>> > Date: Tue, 9 Jun 2015 17:39:36 -0700
>> > Subject: [DeTomaso] Clutch Line Flaring
>> >
>> > I need to cut the line to my clutch master to install a nut to meet
>> the end
>> > of the fitting on one of the CNC clutch masters. Can someone who has
>> one of
>> > these tell me if the ends of the connector are 45 or 37.5 degrees?
>> What was
>> > stock, and can you recommend a good flaring tool set that will do
>> both or
>> > should I stick to one angle? Will be doing all new brake lines
>> during
>> the
>> > restoration in a few years, so don't mind getting a decent flaring
>> kit.
>> >
>> > Thanks
>> > Mike Thomas
>> > Pres., Panteras Northwest
>> > Yellow '74 #6328
>> >
>> >
>> >
>> >
>> > _______________________________________________
>> >
>> > Detomaso Forum Managed by POCA
>> > Posted emails must not exceed 1.5 Megabytes
>> > DeTomaso mailing list
>> > DeTomaso at poca.com
>> > http://poca.com/mailman/listinfo/detomaso_poca.com
>> >
>> > To manage your subscription (change email address, unsubscribe,
>> etc.)
>> use the links above.
>>
>>References
>>
>> 1. http://www.eastwood.com/professional-brake-tubing-flaring-tool.html
>>_______________________________________________
>>
>>Detomaso Forum Managed by POCA
>>Posted emails must not exceed 1.5 Megabytes
>>DeTomaso mailing list
>>DeTomaso at poca.com
>>http://poca.com/mailman/listinfo/detomaso_poca.com
>>
>>To manage your subscription (change email address, unsubscribe, etc.) use
>>the links above.
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
More information about the DeTomaso
mailing list