[DeTomaso] Clutch Line Flaring
Will Kooiman
will.kooiman at gmail.com
Wed Jun 10 21:01:57 EDT 2015
I have one of those too. It is so simple, but it is amazing how well it
works. I think I got mine from Eastwood.
--
Will
On 6/10/15 12:11 AM, "Julian Kift" <julian_kift at hotmail.com> wrote:
> After getting frustrated with the cheaper tools I invested in a
> Brakequip BQ350, it does both 45 and 37 degree single, double and
> bubble flares. You absolutely need one of these professional tools if
> you are attempting stainless lines.
> Since I purchased mine some years ago Eastwood carry the
> recommended (and slightly cheaper) equivalent, although it looks like
> you need to purchase the 37 degree flare die kit separately.
> [1]http://www.eastwood.com/professional-brake-tubing-flaring-tool.html
> Julian
> > From: mbefthomas at comcast.net
> > To: detomaso at poca.com
> > Date: Tue, 9 Jun 2015 17:39:36 -0700
> > Subject: [DeTomaso] Clutch Line Flaring
> >
> > I need to cut the line to my clutch master to install a nut to meet
> the end
> > of the fitting on one of the CNC clutch masters. Can someone who has
> one of
> > these tell me if the ends of the connector are 45 or 37.5 degrees?
> What was
> > stock, and can you recommend a good flaring tool set that will do
> both or
> > should I stick to one angle? Will be doing all new brake lines during
> the
> > restoration in a few years, so don't mind getting a decent flaring
> kit.
> >
> > Thanks
> > Mike Thomas
> > Pres., Panteras Northwest
> > Yellow '74 #6328
> >
> >
> >
> >
> > _______________________________________________
> >
> > Detomaso Forum Managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > DeTomaso at poca.com
> > http://poca.com/mailman/listinfo/detomaso_poca.com
> >
> > To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
>
>References
>
> 1. http://www.eastwood.com/professional-brake-tubing-flaring-tool.html
>_______________________________________________
>
>Detomaso Forum Managed by POCA
>Posted emails must not exceed 1.5 Megabytes
>DeTomaso mailing list
>DeTomaso at poca.com
>http://poca.com/mailman/listinfo/detomaso_poca.com
>
>To manage your subscription (change email address, unsubscribe, etc.) use
>the links above.
More information about the DeTomaso
mailing list