[DeTomaso] Does anyone have the corrorect instructuctions for setting up the cables for the ebrake to use the e -Brake
Boyd Casey
boyd411 at gmail.com
Sun Jul 12 20:01:22 EDT 2015
No Julian I am not thinking of entering the drift circuit. I would just
like a hand brake that really works! I was thinking that one (like those I
have seen) with a long handle that will spin the car 180 degrees is the
type of braking I would like to have available. I have all the Saco parts
except the cables. Ike Burris has said he expects to have the bugs worked
out by next year. I am trying to remain positive but I may not have a year
of reserve.
Boyd
On Sun, Jul 12, 2015 at 7:16 PM, Ken Green <kenn_green at yahoo.com> wrote:
> Julian,
>
> The brackets are done to use these on the billet carriers make by Saco
> Performance. Boyd has these carriers and 996 Turbo calipers, and the
> Viper (Brembo) calipers are a very good fit.
>
> Ken[image: Inline image]
> [image: Inline image]
>
>
> ------------------------------
> *From:* Julian Kift <julian_kift at hotmail.com>
> *To:* Boyd Casey <boyd411 at gmail.com>; Ken Green <kenn_green at yahoo.com>
> *Cc:* De Tomaso List <detomaso at poca.com>
> *Sent:* Sunday, July 12, 2015 2:39 PM
>
> *Subject:* Re: [DeTomaso] Does anyone have the corrorect instructuctions
> for setting up the cables for the ebrake to use the e -Brake
>
> The Viper calipers are a mechanical, I'm still not sure what you are
> looking for, a vendor kit? I don't think that exists, you'll probably
> have to fabricate a mounting bracket and something that mates the
> existing Pantera cable with the viper caliper actuator. It shouldn't be
> too hard if you have parts in hand and there are a lot of custom cable
> fabricators out there if need be.
> A drift brake is something quite different as it is usually part of the
> hydraulic circuit i.e.e a hydraulic handbrake Are you now planning on
> entering drifting competition with your Pantera?
> Julian
> Date: Sun, 12 Jul 2015 16:51:21 -0400
> From: boyd411 at gmail.com
> To: kenn_green at yahoo.com
> Subject: Re: [DeTomaso] Does anyone have the corrorect instructuctions
> for setting up the cables for the ebrake to use the e -Brake
> CC: detomaso at poca.com
> Ken,
> I am looking for a way to use the brembro e-brake that that came with the
> viper and can be used in such a way that it will stop the car and hold
> the car so that it is in compliance with all the governing bodies that
> sanction racing bodies. In a nut shell . An e brake that will actually
> stop the car.. Ideally with a long handle it would work like a dirft brake.
> ( this would be in a perfect world (of course)
> Boyd
>
> On Sun, Jul 12, 2015 at 4:33 PM, Ken Green <kenn_green at yahoo.com> wrote:
>
> > Boyd,
> >
> > Do you mean the mechanical brake or an electric parking brake like this:
> >
> > [1]http://www.estopp.com/
> >
> > Chris has experience with it. Maybe this is the way to go.
> >
> > Chris?
> >
> > Ken
> >
> >
> >
> > ------------------------------
> > *From:* Boyd Casey <boyd411 at gmail.com>
> > *To:* "detomaso at poca.com" <detomaso at poca.com>
> > *Sent:* Sunday, July 12, 2015 7:42 AM
> > *Subject:* [DeTomaso] Does anyone have the corrorect instructuctions for
> > setting up the cables for the ebrake to use the e -Brake
> >
> > brake that comes with the e brake
> >
> >
> >
> > _______________________________________________
> >
> > Detomaso Forum Managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > DeTomaso at poca.com
> > [2]http://poca.com/mailman/listinfo/detomaso_poca.com
> >
> > To manage your subscription (change email address, unsubscribe, etc.) use
> > the links above.
> >
> >
> >
>
> _______________________________________________ Detomaso Forum Managed
> by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing
> list DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com To manage your
> subscription (change email address, unsubscribe, etc.) use the links
> above.
>
> References
>
>
>
>
> 1. http://www.estopp.com/
> 2. http://poca.com/mailman/listinfo/detomaso_poca.com
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
>
>
-------------- next part --------------
No Julian I am not thinking A of entering the drift circuit. I would
just like a hand brake that really works! I was thinking that one (like
those I have seen) with a long handle that will spin the car 180
degrees is the type of braking I would like to have available. I have
all the Saco parts except the cables. Ike Burris has said he expects to
have the bugs worked out by next year. I am trying to remain positive
but I may not have a year A of reserve.
Boyd
On Sun, Jul 12, 2015 at 7:16 PM, Ken Green <[1]kenn_green at yahoo.com>
wrote:
Julian,
A A A The brackets are done to use these onA the billet carriers make
by Saco Performance.A A Boyd has these carriers and 996 Turbo
calipers, and the Viper (Brembo) calipers are a very good fit.
Ken Inline image
Inline image
A
__________________________________________________________________
From: Julian Kift <[2]julian_kift at hotmail.com>
To: Boyd Casey <[3]boyd411 at gmail.com>; Ken Green
<[4]kenn_green at yahoo.com>
Cc: De Tomaso List <[5]detomaso at poca.com>
Sent: Sunday, July 12, 2015 2:39 PM
Subject: Re: [DeTomaso] Does anyone have the corrorect instructuctions
for setting up the cables for the ebrake to use the e -Brake
A The Viper calipers are a mechanical, I'm still not sure what you are
A looking for, a vendor kit? I don't think that exists, you'll
probably
A have to fabricate a mounting bracket and something that mates the
A existing Pantera cable with the viper caliper actuator. It shouldn't
be
A too hard if you have parts in hand and there are a lot of custom
cable
A fabricators out there if need be.
A A drift brake is something quite different as it is usually part of
the
A hydraulic circuit i.e.e a hydraulic handbrake Are you now planning
on
A entering drifting competition with your Pantera?
A Julian
A Date: Sun, 12 Jul 2015 16:51:21 -0400
A From: [6]boyd411 at gmail.com
A To: [7]kenn_green at yahoo.com
A Subject: Re: [DeTomaso] Does anyone have the corrorect
instructuctions
A for setting up the cables for the ebrake to use the e -Brake
A CC: [8]detomaso at poca.com
Ken,
I am looking forA a way to use the brembro e-brake that that came with
the
viperA A and can be used in such a way that it will stop the car and
hold
the car so that it is in compliance with all the governing bodies that
sanction racing bodies.A In a nut shell . An e brake that will
actually
stop the car.. Ideally with a long handle it would work like a dirft
brake.
( this would be in a perfect world (of course)
Boyd
On Sun, Jul 12, 2015 at 4:33 PM, Ken Green <[9]kenn_green at yahoo.com>
wrote:
> Boyd,
>
> Do you mean the mechanical brake or an electric parking brake like
this:
>
> [1][10]http://www.estopp.com/
>
> Chris has experience with it.A Maybe this is the way to go.
>
> Chris?
>
> Ken
>
>
>
>A ------------------------------
>A *From:* Boyd Casey <[11]boyd411 at gmail.com>
> *To:* "[12]detomaso at poca.com" <[13]detomaso at poca.com>
> *Sent:* Sunday, July 12, 2015 7:42 AM
> *Subject:* [DeTomaso] Does anyone have the corrorect instructuctions
for
> setting up the cables for the ebrake to use the e -Brake
>
>A brake that comes with the e brake
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [14]DeTomaso at poca.com
> [2][15]http://poca.com/mailman/listinfo/detomaso_poca.com
>
> To manage your subscription (change email address, unsubscribe, etc.)
use
> the links above.
>
>
>
A _______________________________________________ Detomaso Forum
Managed
A by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing
A list [16]DeTomaso at poca.com
A [17]http://poca.com/mailman/listinfo/detomaso_poca.com To manage
your
A subscription (change email address, unsubscribe, etc.) use the links
A above.
References
A 1. [18]http://www.estopp.com/
A 2. [19]http://poca.com/mailman/listinfo/detomaso_poca.com
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[20]DeTomaso at poca.com
[21]http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
References
1. mailto:kenn_green at yahoo.com
2. mailto:julian_kift at hotmail.com
3. mailto:boyd411 at gmail.com
4. mailto:kenn_green at yahoo.com
5. mailto:detomaso at poca.com
6. mailto:boyd411 at gmail.com
7. mailto:kenn_green at yahoo.com
8. mailto:detomaso at poca.com
9. mailto:kenn_green at yahoo.com
10. http://www.estopp.com/
11. mailto:boyd411 at gmail.com
12. mailto:detomaso at poca.com
13. mailto:detomaso at poca.com
14. mailto:DeTomaso at poca.com
15. http://poca.com/mailman/listinfo/detomaso_poca.com
16. mailto:DeTomaso at poca.com
17. http://poca.com/mailman/listinfo/detomaso_poca.com
18. http://www.estopp.com/
19. http://poca.com/mailman/listinfo/detomaso_poca.com
20. mailto:DeTomaso at poca.com
21. http://poca.com/mailman/listinfo/detomaso_poca.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SacoPerformance Brake Installation 057-12 (2).jpg
Type: image/jpeg
Size: 323137 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20150712/7087c184/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0974.JPG
Type: image/jpeg
Size: 247714 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20150712/7087c184/attachment.jpe>
More information about the DeTomaso
mailing list