[DeTomaso] Pantera clock
Jeff Detrich
jjdetrich at gmail.com
Sat Jul 11 10:40:12 EDT 2015
Too bad it uses green hands and numbers. White would fit better with the
white on black Pantera guages.
Jeff
6559
On Thu, Jul 9, 2015 at 8:18 PM, Mike Thomas <mbefthomas at comcast.net> wrote:
> Apologies if this is old news to y'all, I was not aware.
>
>
> I've been corresponding with Tim Keller from Auto Meter, and they've
> come up with an analog clock that is a near match for the smaller
> Pantera gages (scroll down the thread, past the coffee gage, which, by
> the way, is for those of us from Seattle only . . .;-)). I've asked
> him if he can give us a discount for a group buy, didn't know what the
> interest might be, so I thought I'd pass it along anyway. When I moved
> my window switches to the console behind the shifter, I covered over
> the window switch holes in the new aluminum gage panel with carbon
> fiber vinyl wrap in hopes I'd find a clock like this to put in there
> sometime in the future.
>
>
> I'll let you know what his response is
>
>
> Thanks
>
>
> Mike Thomas
>
> Pres., Panteras Northwest
>
> Yellow '74 #6328
>
>
> From: Tim Keller
>
>
> The gauge I have designed requires a 2-1/16" diameter hole, and the
> finished OD of the bezel measures 2-5/16".
>
> The chrome bezel does differ slightly, and I have taken a close up pic,
> shown below:
>
>
> cid:image005.jpg at 01D0BA25.E09F31B0
>
>
>
> The gauge comes supplied with an incandescent bulb assembly, and is to
> be wired as shown below:
>
>
> cid:image006.png at 01D0BA25.A22081A0
>
>
>
> We can thank autocorrect for Panera - however, we do manufacture gauges
> for Starbucks!
>
>
> https://s-media-cache-ak0.pinimg.com/236x/5c/ed/0b/5ced0b5afe5b23df5930
> 4567d904b423.jpg
>
>
>
>
>
> Thank you,
>
>
> Tim Keller
>
> Technical Sales Specialist
>
> Auto Meter Products, Inc.
>
>
>
> From: Mike Thomas [[1]mailto:mbefthomas at comcast.net]
> Sent: Wednesday, July 08, 2015 9:55 PM
> To: 'Tim Keller'
> Subject: RE: 2-1/16" Pantera clock
>
>
> Most excellent! The only match I'm looking for is in the size and
> chrome bezel. Is it self-contained, or does it need to be wired for a
> light? I will be ordering one soon. Oh, and I believe you meant the
> Pantera Owner's Club, unless the Panera Bread folks are having clocks
> made as well ;-).
>
> Thanks again
>
> Mike Thomas
>
>
>
> From: Tim Keller [
>
>
> Hi Mike,
>
>
> We do not offer the service of modifying OEM gauges.
>
>
>
> However, I have been working with the Panera Owner's Club of America in
> designing replica gauges.
>
> I believe you may be looking for this:
>
> cid:image001.jpg at 01D0BA22.46E0DAE0
>
>
> Please be advised, this will not match your OEM gauges perfectly, as we
> are not utilizing OEM Pantera materials.
>
> Cost is $109, free continental shipping in the US, and a three week
> lead time to fabricate.
>
>
>
>
> Thank you,
>
>
> Tim Keller
>
> Technical Sales Specialist
>
> Auto Meter Products, Inc.
>
>
>
> From: Mike [[2]mailto:customerservice at ampcustomshop.com]
> Sent: Wednesday, July 08, 2015 10:21 AM
> To: [3]customerservice at ampcustomshop.com
> Subject: Form submission from: Contact Us
>
>
>
> [4]Image removed by sender.
>
> Submitted on Wednesday, July 8, 2015 - 10:21
>
> Submitted by anonymous user: [127.0.0.1]
>
> Submitted values are:
>
> First Name:
>
> Mike
>
> Last Name:
>
> Thomas
>
> Telephone:
>
> 2067953302
>
> Email Address:
>
> [5]mbefthomas at comcast.net
>
> Country:
>
> USA
>
> Message:
>
> Have a gage for my 74 Pantera that I would like converted to an analog
> clock. Gage is approximately 2". would you be able to replace the guts
> and face with a clock mech such that it would look close to original?
>
> Join Auto Meter's Mailing List:
>
> Join Auto Meter's Mailing List
>
> The results of this submission may be viewed at:
>
> References
>
> 1. mailto:mbefthomas at comcast.net
> 2. mailto:customerservice at ampcustomshop.com
> 3. mailto:customerservice at ampcustomshop.com
> 4. http://www.ampcustomshop.com/
> 5. mailto:mbefthomas at comcast.net
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
>
-------------- next part --------------
Too bad it uses green hands and numbers. White would fit better with
the white on black Pantera guages.
Jeff
6559
On Thu, Jul 9, 2015 at 8:18 PM, Mike Thomas <[1]mbefthomas at comcast.net>
wrote:
A A Apologies if this is old news to y'all, I was not aware.
A A I've been corresponding with Tim Keller from Auto Meter, and
they've
A A come up with an analog clock that is a near match for the
smaller
A A Pantera gages (scroll down the thread, past the coffee gage,
which, by
A A the way, is for those of us from Seattle only . . .;-)).A I've
asked
A A him if he can give us a discount for a group buy, didn't know
what the
A A interest might be, so I thought I'd pass it along anyway.A
When I moved
A A my window switches to the console behind the shifter, I covered
over
A A the window switch holes in the new aluminum gage panel with
carbon
A A fiber vinyl wrap in hopes I'd find a clock like this to put in
there
A A sometime in the future.
A A I'll let you know what his response is
A A Thanks
A A Mike Thomas
A A Pres., Panteras Northwest
A A Yellow '74 #6328
A A From: Tim Keller
A A The gauge I have designed requires a 2-1/16" diameter hole, and
the
A A finished OD of the bezel measures 2-5/16".
A A The chrome bezel does differ slightly, and I have taken a close
up pic,
A A shown below:
A A cid:image005.jpg at 01D0BA25.E09F31B0
A A The gauge comes supplied with an incandescent bulb assembly,
and is to
A A be wired as shown below:
A A cid:image006.png at 01D0BA25.A22081A0
A A We can thank autocorrect for Panera - however, we do
manufacture gauges
A A for Starbucks!
A
A [2]https://s-media-cache-ak0.pinimg.com/236x/5c/ed/0b/5ced0b5afe5b
23df5930
A A 4567d904b423.jpg
A A Thank you,
A A Tim Keller
A A Technical Sales Specialist
A A Auto Meter Products, Inc.
A A From: Mike Thomas [[1]mailto:[3]mbefthomas at comcast.net]
A A Sent: Wednesday, July 08, 2015 9:55 PM
A A To: 'Tim Keller'
A A Subject: RE: 2-1/16" Pantera clock
A A Most excellent!A The only match I'm looking for is in the size
and
A A chrome bezel.A Is it self-contained, or does it need to be
wired for a
A A light?A I will be ordering one soon.A Oh, and I believe you
meant the
A A Pantera Owner's Club, unless the Panera Bread folks are having
clocks
A A made as well ;-).
A A Thanks again
A A Mike Thomas
A A From: Tim Keller [
A A Hi Mike,
A A We do not offer the service of modifying OEM gauges.
A A However, I have been working with the Panera Owner's Club of
America in
A A designing replica gauges.
A A I believe you may be looking for this:
A A cid:image001.jpg at 01D0BA22.46E0DAE0
A A Please be advised, this will not match your OEM gauges
perfectly, as we
A A are not utilizing OEM Pantera materials.
A A Cost is $109, free continental shipping in the US, and a three
week
A A lead time to fabricate.
A A Thank you,
A A Tim Keller
A A Technical Sales Specialist
A A Auto Meter Products, Inc.
A A From: Mike [[2]mailto:[4]customerservice at ampcustomshop.com]
A A Sent: Wednesday, July 08, 2015 10:21 AM
A A To: [3][5]customerservice at ampcustomshop.com
A A Subject: Form submission from: Contact Us
A A [4]Image removed by sender.
A A Submitted on Wednesday, July 8, 2015 - 10:21
A A Submitted by anonymous user: [127.0.0.1]
A A Submitted values are:
A A First Name:
A A Mike
A A Last Name:
A A Thomas
A A Telephone:
A A 2067953302
A A Email Address:
A A [5][6]mbefthomas at comcast.net
A A Country:
A A USA
A A Message:
A A Have a gage for my 74 Pantera that I would like converted to an
analog
A A clock. Gage is approximately 2". would you be able to replace
the guts
A A and face with a clock mech such that it would look close to
original?
A A Join Auto Meter's Mailing List:
A A Join Auto Meter's Mailing List
A A The results of this submission may be viewed at:
References
A A 1. mailto:[7]mbefthomas at comcast.net
A A 2. mailto:[8]customerservice at ampcustomshop.com
A A 3. mailto:[9]customerservice at ampcustomshop.com
A A 4. [10]http://www.ampcustomshop.com/
A A 5. mailto:[11]mbefthomas at comcast.net
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[12]DeTomaso at poca.com
[13]http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
References
1. mailto:mbefthomas at comcast.net
2. https://s-media-cache-ak0.pinimg.com/236x/5c/ed/0b/5ced0b5afe5b23df5930
3. mailto:mbefthomas at comcast.net
4. mailto:customerservice at ampcustomshop.com
5. mailto:customerservice at ampcustomshop.com
6. mailto:mbefthomas at comcast.net
7. mailto:mbefthomas at comcast.net
8. mailto:customerservice at ampcustomshop.com
9. mailto:customerservice at ampcustomshop.com
10. http://www.ampcustomshop.com/
11. mailto:mbefthomas at comcast.net
12. mailto:DeTomaso at poca.com
13. http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list