[DeTomaso] Pantera clock
Mirril M. McMullen
mirrilm at earthlink.net
Fri Jul 10 10:15:31 EDT 2015
I'm in for one!
#6859 WAYBAC
/\/\///
-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at poca.com] On Behalf Of Mike Thomas
Sent: Thursday, July 09, 2015 9:18 PM
To: detomaso at poca.com
Subject: [DeTomaso] Pantera clock
Apologies if this is old news to y’all, I was not aware.
I’ve been corresponding with Tim Keller from Auto Meter, and they’ve come up with an analog clock that is a near match for the smaller Pantera gages (scroll down the thread, past the coffee gage, which, by the way, is for those of us from Seattle only . . .;-)). I’ve asked him if he can give us a discount for a group buy, didn’t know what the interest might be, so I thought I’d pass it along anyway. When I moved my window switches to the console behind the shifter, I covered over the window switch holes in the new aluminum gage panel with carbon fiber vinyl wrap in hopes I’d find a clock like this to put in there sometime in the future.
I’ll let you know what his response is
Thanks
Mike Thomas
Pres., Panteras Northwest
Yellow ’74 #6328
From: Tim Keller
The gauge I have designed requires a 2-1/16” diameter hole, and the finished OD of the bezel measures 2-5/16”.
The chrome bezel does differ slightly, and I have taken a close up pic, shown below:
The gauge comes supplied with an incandescent bulb assembly, and is to be wired as shown below:
We can thank autocorrect for Panera – however, we do manufacture gauges for Starbucks!
Thank you,
Tim Keller
Technical Sales Specialist
Auto Meter Products, Inc.
From: Mike Thomas [ <mailto:mbefthomas at comcast.net> mailto:mbefthomas at comcast.net]
Sent: Wednesday, July 08, 2015 9:55 PM
To: 'Tim Keller'
Subject: RE: 2-1/16" Pantera clock
Most excellent! The only match I’m looking for is in the size and chrome bezel. Is it self-contained, or does it need to be wired for a light? I will be ordering one soon. Oh, and I believe you meant the Pantera Owner’s Club, unless the Panera Bread folks are having clocks made as well ;-).
Thanks again
Mike Thomas
From: Tim Keller [
Hi Mike,
We do not offer the service of modifying OEM gauges.
However, I have been working with the Panera Owner’s Club of America in designing replica gauges.
I believe you may be looking for this:
Please be advised, this will not match your OEM gauges perfectly, as we are not utilizing OEM Pantera materials.
Cost is $109, free continental shipping in the US, and a three week lead time to fabricate.
Thank you,
Tim Keller
Technical Sales Specialist
Auto Meter Products, Inc.
From: Mike [ <mailto:customerservice at ampcustomshop.com> mailto:customerservice at ampcustomshop.com]
Sent: Wednesday, July 08, 2015 10:21 AM
To: <mailto:customerservice at ampcustomshop.com> customerservice at ampcustomshop.com
Subject: Form submission from: Contact Us
<http://www.ampcustomshop.com/>
Submitted on Wednesday, July 8, 2015 - 10:21
Submitted by anonymous user: [127.0.0.1]
Submitted values are:
First Name:
Mike
Last Name:
Thomas
Telephone:
2067953302
Email Address:
mbefthomas at comcast.net <mailto:mbefthomas at comcast.net>
Country:
USA
Message:
Have a gage for my 74 Pantera that I would like converted to an analog clock. Gage is approximately 2". would you be able to replace the guts and face with a clock mech such that it would look close to original?
Join Auto Meter's Mailing List:
Join Auto Meter’s Mailing List
The results of this submission may be viewed at:
More information about the DeTomaso
mailing list