[DeTomaso] Instrument Lights Upgrade
Garth Rodericks
garth_rodericks at yahoo.com
Thu Jan 1 20:36:15 EST 2015
No. The dimmer becomes an on/off switch of sorts. Some folks on the PI Board have identified aim compatible LED dimmers that they've retrofitted into their cars. I find there's no need I dim them, as I like the light level from the LEDs.
Sent from my iPhone
> On Jan 1, 2015, at 5:07 PM, David <david at msmcontractors.org> wrote:
>
> Will the LED lights work with factory dimmer?
>
>
>> On Jan 1, 2015, at 3:43 PM, Garth Rodericks via DeTomaso <detomaso at poca.com> wrote:
>>
>> Hi Dan,
>> Go with green bulbs. White will be too bright, and tend to cast a
>> bluish tint on the gauges. I bought some cheap white LED bulbs on ebay
>> and found they illuminated all the gauges, including the tach and
>> speedometer, quite well. For the first time in 11 years I can see the
>> tach and speedo at night!
>> Anyway, I just bought a set of green LED's because the white has a
>> bluish tint that doesn't look right in our cars.
>> Cheers!
>> Garth
>> -------------- original message --------------
>> I've been searching old forum email for info on the instument bulb
>> upgrades from [1]superbrightleds.com (I drive by the place on the way
>> to work).A I'd like to do all the instuments, including adding bulbs
>> to the tach and speedo.A From what I gather, the part numbers I'm
>> looking for are:
>> For the center instrument panel:
>> A 194 LED Bulb - 1 SMD LED Wedge Base
>> A Part Number: WLED-WHP
>> For the generator, heater, turn signal:
>> A
>> A 194 LED Bulb - 6 LED Wedge Base
>> A Part Number: WLED-NW6
>> For the tach and speedo the part number mentioned was BA9s-x-WV but I
>> can find no match.A When I search on BA9S on theA superbrightleds
>> site, I get 11 different part numbers with multiple option on beam
>> angle and voltage.A The best matches appear to be:
>> A BA9s LED Bulb - 4 LED (13 lumens)
>> A Product Code: BA9S-x4-x-xVAC
>> A BA9s LED Bulb - 1 LED Wide Angle (8.5 lumens)
>> A Product Code: BA9s-x-x-xVAC
>> A BA9s LED Bulb - 1 LED (3 lumens)
>> A Product Code: BA9s-x-xVAC
>> Assuming I want the brighter 13 lumens part number (correct me if I'm
>> wrong), 12 volts AC/DC and a white bulb, there are two beam angle
>> choices: BA9S-W4-32-12VAC (32 degrees) or BA9S-W4-90-12VAC (90
>> degrees).A Which is preferred?A Also, what's involved with adding the
>> extra bulbs to the tach and speedo?
>> Thanks,
>> Dan Jones
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> DeTomaso mailing list
>> DeTomaso at poca.com
>> http://poca.com/mailman/listinfo/detomaso_poca.com
>>
>> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
More information about the DeTomaso
mailing list