[DeTomaso] Timing primer (MSD)
jderyke at aol.com
jderyke at aol.com
Wed Feb 25 15:26:02 EST 2015
Ours is fairly thoroughly modified with 10.5:1 SVO heads & flat tappet cam, and my best response comes with 16 initial & 34 total, with the vacuum advance adjusted for no ping. FWIW- J DeRyke
[What do y'all set your total timing to on your Cleveland HiPo engines?]
-----Original Message-----
From: Brent Stewart via DeTomaso <detomaso at poca.com>
To: Pantera List <detomaso at poca.com>
Sent: Wed, Feb 25, 2015 8:35 am
Subject: [DeTomaso] Timing primer (MSD)
Basic stuff up to about 7 min - then it got interesting. Discussion
about
springs and weights in an MSD distributor. Lots of "trial and
error" i
suppose. I haven't messed with mine...yet...
What do y'all set your total
timing to on your Cleveland HiPo engines?
[1]Video 101: How to Set Ignition
Timing - OnAllCylinders
[2]Video 101: How to Set Ignition Timing
- OnAllCylinders
Perhaps this wouldave been a good post for a Throwback
Thursday.
[3]View on www.onallcylinders.com
Preview by
Yahoo
References
1.
http://www.onallcylinders.com/2015/02/24/video-101-set-ignition-timing/
2.
http://www.onallcylinders.com/2015/02/24/video-101-set-ignition-timing/
3.
http://www.onallcylinders.com/2015/02/24/video-101-set-ignition-timing/
_______________________________________________
Detomaso Forum Managed by
POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing
list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
To
manage your subscription (change email address, unsubscribe, etc.) use the links
above.
More information about the DeTomaso
mailing list