[DeTomaso] Quella Adjustable Upper Rear A Arms - Installation Help
Mike Drew
MikeLDrew at aol.com
Fri Feb 13 22:58:02 EST 2015
Mike,
What was the outcome of all this?
Mike
Sent from my iPhone
On Jan 31, 2015, at 19:09, Mike Drew via DeTomaso <detomaso at poca.com> wrote:
> Sounds like Dennis' manufacturer goofed. Stop now and pick up the phone
> first thing Monday. Fwiw I had a set of these on my car at one time and
> they bolted right on.
>
> Mike
> Sent from my iPhone
>
> On Jan 31, 2015, at 16:54, "Mike Thomas" <[1]mbefthomas at comcast.net>
> wrote:
>
> Nope, the taper on the original ball joint is much more slender than
> that which slips on the bolt on Dennis' heim joint. I had expected it
> to be a drop in as well.
>
>
> Mike T.
>
>
>
> From: [2]MikeLDrew at aol.com [[3]mailto:MikeLDrew at aol.com]
> Sent: Saturday, January 31, 2015 3:21 PM
> To: [4]mbefthomas at comcast.net; [5]detomaso at poca.com
> Subject: Re: [DeTomaso] Quella Adjustable Upper Rear A Arms -
> Installation Help
>
>
> In a message dated 1/31/15 15 18 9, [6]mbefthomas at comcast.net writes:
>
> I've got a set of Dennis Quella's adjustable upper rear A arms that
> I'm
> ready to install, but when I did a test fit to the top of the
> upright, the
> taper provided with the A arm is much too big. If you have
> installed a set
> of these, did you have to have the hole at the top of the upright
> machined
> out to fit the larger taper on the Quella A arm? Is there a sleeve
> pops out
> of top of the upright?
>
>>>> Nope--normally the taper on the end of the heim joint fits the
> upright perfectly. Compare it dimensionally to the ball joint on your
> stock A-arm?
>
>> I'll call Dennis on Monday to find out, but hoping one of y'all out
> there
> has an answer before that.
>
>>>> Should be a straightforward bolt-in swap with no issues.
> Mike
>
> References
>
> 1. mailto:mbefthomas at comcast.net
> 2. mailto:MikeLDrew at aol.com
> 3. mailto:MikeLDrew at aol.com
> 4. mailto:mbefthomas at comcast.net
> 5. mailto:detomaso at poca.com
> 6. mailto:mbefthomas at comcast.net
> _______________________________________________
>
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
More information about the DeTomaso
mailing list