[DeTomaso] '74 Taillight Lens
MikeLDrew at aol.com
MikeLDrew at aol.com
Thu Dec 3 15:26:57 EST 2015
In a message dated 12/1/15 4:38:32 AM, detomaso at poca.com writes:
> IIRC.. You actually screw the screw into threads in the lens until screw
> threads go all the way through the lens, then the screw shoulder ( diameter
> smaller than threaded portion ) is in lens hole.
>
>>>Ah, that's it!
I wrestled a screw out and measured--the threads measure 3.83mm while the
shank is 3.41mm.
Brilliant!
Mike (learning something new every day....)
-------------- next part --------------
In a message dated 12/1/15 4:38:32 AM, detomaso at poca.com writes:
IIRC.. You actually screw the screw into threads in the lens until
screw threads go all the way through the lens, then the screw
shoulder ( diameter smaller than threaded portion ) is in lens
hole.
>>>Ah, that's it!
I wrestled a screw out and measured--the threads measure 3.83mm while
the shank is 3.41mm.
Brilliant!
Mike (learning something new every day....)
More information about the DeTomaso
mailing list