[DeTomaso] Anyone have offset numbers for 8 inch front and
David Nunn
dnunn at telus.net
Thu Aug 20 15:25:00 EDT 2015
Ken,
Your speculation is 100% correct. Backspacing includes a nominal ½ bead
allowance, offset does not. In keeping with this, if you measure the overall
width of an 8 wide wheel, it will be 9. If the backspacing measurement is
5-1/4, the actual inside portion of the wheel width would be 4-3/4. If you
deduct half of the 8 wheel width from the 4-3/4 inside measurement, you
get positive ¾ or 19mm offset (AKA ET19).
-------------- next part --------------
Ken,
Your speculation is 100% correct. Backspacing includes a nominal 1/2"
bead allowance, offset does not. In keeping with this, if you measure
the overall width of an 8" wide wheel, it will be 9". If the
backspacing measurement is 5-1/4", the actual inside portion of the
wheel width would be 4-3/4". If you deduct half of the 8" wheel width
from the 4-3/4" inside measurement, you get positive 3/4" or 19mm
offset (AKA ET19).
More information about the DeTomaso
mailing list