[DeTomaso] Anyone have offset numbers for 8 inch front and 10 inch rear wheels?
Tomas Gunnarsson
guson at home.se
Thu Aug 20 14:48:54 EDT 2015
Ken,
As Mike wrote, ET is the German abrevation for offset. The fronts are spot on with the original wheels so if you put 225 tires on with the appropriate height you should have the same problems as stock. The rears are more inward oriented than stock, ET 12 vs ET -5, which I assume is to allow for a wider tire than stock to fit under the fender lip.
Tomas
----- Original Message -----
From: Ken Green
To: Tomas Gunnarsson
Cc: detomaso at poca.com
Sent: Thursday, August 20, 2015 7:01 PM
Subject: Re: [DeTomaso] Anyone have offset numbers for 8 inch front and 10 inch rear wheels?
Thanks Tomas,
There are a set of Coddington "Pantera wheels" on ebay right now:
http://www.ebay.com/itm/Boyd-Coddington-Super-10-Spoke-Wheel-for-DeTomaso-Pantera-staggered-17x8-11-/181840688325
with this description:
"For sale is a set of four authentic Bill Coddington designed Super 10 Spoke wheels. The front wheels measure 17x8 (et 19, or a 5.25" backspacing) and the rears measure 17x11 (et 12, or a 6.5" backspacing) and have a 5x114.3 (or 5x4.5) bolt pattern."
If I have this right, the front wheels are 46mm inward versus your 19mm (about an inch difference). That seems substantial, and could cause clearance issues? What do you think? I'm not sure what the "et 19" in the description means.
Ken,
------------------------------------------------------------------------------
From: Tomas Gunnarsson <guson at home.se>
To: kenn_green at yahoo.com
Cc: detomaso at poca.com
Sent: Wednesday, August 19, 2015 11:50 PM
Subject: Re: [DeTomaso] Anyone have offset numbers for 8 inch front and 10 inch rear wheels?
Ken,
19 mm inwards on the front wheels, 5 mm outwards on the rears is what I have noted.
Tomas
<-----Ursprungligt Meddelande----->
From: Ken Green via DeTomaso [detomaso at poca.com]
Sent: 20/8/2015 6:21:15 AM
To: detomaso at poca.com
Subject: [DeTomaso] Anyone have offset numbers for 8 inch front and 10 inch rear wheels?
Been looking at aftermarket wheels, and need the offset (not the backspacing) to see if anything fits. I know backspacing numbers have been posted and I think offset is backspacing - width/2, but people seem to measure the backspacing differently.
Thanks,
Ken
-------------- next part --------------
i>>?
Ken,
As Mike wrote, ET is the German abrevation for offset. The fronts are
spot on with the original wheels so if you put 225 tires on with the
appropriate height you should have the same problems as stock. The
rears are more inward oriented than stock, ET 12 vs ET -5, which I
assume is to allow for a wider tire than stock to fit under the fender
lip.
Tomas
----- Original Message -----
From: [1]Ken Green
To: [2]Tomas Gunnarsson
Cc: [3]detomaso at poca.com
Sent: Thursday, August 20, 2015 7:01 PM
Subject: Re: [DeTomaso] Anyone have offset numbers for 8 inch front and
10 inch rear wheels?
Thanks Tomas,
There are a set of Coddington "Pantera wheels" on ebay right now:
[4]http://www.ebay.com/itm/Boyd-Coddington-Super-10-Spoke-Wheel-for-DeT
omaso-Pantera-staggered-17x8-11-/181840688325
with this description:
"For sale is a set of four authentic Bill Coddington designed Super 10
Spoke wheels. The front wheels measure 17x8 (et 19, or a 5.25"
backspacing) and the rears measure 17x11 (et 12, or a 6.5" backspacing)
and have a 5x114.3 (or 5x4.5) bolt pattern."
If I have this right, the front wheels are 46mm inward versus your 19mm
(about an inch difference). That seems substantial, and could cause
clearance issues? What do you think? I'm not sure what the "et 19" in
the description means.
Ken,
__________________________________________________________________
From: Tomas Gunnarsson <guson at home.se>
To: kenn_green at yahoo.com
Cc: detomaso at poca.com
Sent: Wednesday, August 19, 2015 11:50 PM
Subject: Re: [DeTomaso] Anyone have offset numbers for 8 inch front and
10 inch rear wheels?
Ken,
19 mm inwards on the front wheels, 5 mm outwards on the rears is what I
have noted.
Tomas
<-----Ursprungligt Meddelande----->
From: Ken Green via DeTomaso [detomaso at poca.com]
Sent: 20/8/2015 6:21:15 AM
To: detomaso at poca.com
Subject: [DeTomaso] Anyone have offset numbers for 8 inch front and 10
inch rear wheels?
Been looking at aftermarket wheels, and need the offset (not the
backspacing) to see if anything fits. I know backspacing numbers have
been posted and I think offset is backspacing - width/2, but people
seem to measure the backspacing differently.
Thanks,
Ken
References
1. mailto:kenn_green at yahoo.com
2. mailto:guson at home.se
3. mailto:detomaso at poca.com
4. http://www.ebay.com/itm/Boyd-Coddington-Super-10-Spoke-Wheel-for-DeTomaso-Pantera-staggered-17x8-11-/181840688325
More information about the DeTomaso
mailing list