[DeTomaso] Anyone have offset numbers for 8 inch front and 10 inch rear wheels?

bflesland at gmail.com bflesland at gmail.com
Thu Aug 20 13:58:32 EDT 2015


ET = Einpress Tiefe.

Cheers Bjoern


> Den 20. aug. 2015 kl. 19:53 skrev Mike Drew via DeTomaso <detomaso at poca.com>:
> 
> Ken,
> 
> ET 19 means 19mm offset....
> 
> Mike
> 
> Sent from my iPhone
> 
>> On Aug 20, 2015, at 13:01, Ken Green via DeTomaso <detomaso at poca.com> wrote:
>> 
>>  Thanks Tomas,
>>     There are a set of Coddington "Pantera wheels" on ebay right now:
>>  [1]http://www.ebay.com/itm/Boyd-Coddington-Super-10-Spoke-Wheel-for-DeT
>>  omaso-Pantera-staggered-17x8-11-/181840688325
>>  with this description:
>>  "For sale is a set of four authentic Bill Coddington designed Super 10
>>  Spoke wheels. The front wheels measure 17x8 (et 19, or a 5.25"
>>  backspacing) and the rears measure 17x11 (et 12, or a 6.5" backspacing)
>>  and have a 5x114.3 (or 5x4.5) bolt pattern."
>>  If I have this right, the front wheels are 46mm inward versus your 19mm
>>  (about an inch difference).  That seems substantial, and could cause
>>  clearance issues?  What do you think?  I'm not sure what the "et 19" in
>>  the description means.
>>  Ken,
>>    __________________________________________________________________
>> 
>>  From: Tomas Gunnarsson <guson at home.se>
>>  To: kenn_green at yahoo.com
>>  Cc: detomaso at poca.com
>>  Sent: Wednesday, August 19, 2015 11:50 PM
>>  Subject: Re: [DeTomaso] Anyone have offset numbers for 8 inch front and
>>  10 inch rear wheels?
>>  Ken,
>> 
>>  19 mm inwards on the front wheels, 5 mm outwards on the rears is what I
>>  have noted.
>> 
>>  Tomas
>>  <-----Ursprungligt Meddelande----->
>>      From: Ken Green via DeTomaso [detomaso at poca.com]
>>  Sent: 20/8/2015 6:21:15 AM
>>  To: detomaso at poca.com
>>  Subject: [DeTomaso] Anyone have offset numbers for 8 inch front and 10
>>  inch rear wheels?
>>  Been looking at aftermarket wheels, and need the offset (not the
>>  backspacing) to see if anything fits.  I know backspacing numbers have
>>  been posted and I think offset is backspacing - width/2, but people
>>  seem to measure the backspacing differently.
>>  Thanks,
>>  Ken
>> 
>> References
>> 
>>  1. http://www.ebay.com/itm/Boyd-Coddington-Super-10-Spoke-Wheel-for-DeTomaso-Pantera-staggered-17x8-11-/181840688325
>> _______________________________________________
>> 
>> Detomaso Forum Managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> DeTomaso at poca.com
>> http://poca.com/mailman/listinfo/detomaso_poca.com
>> 
>> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.




More information about the DeTomaso mailing list