[DeTomaso] Anyone have offset numbers for 8 inch front and 10 inch rear wheels?

[Ken Green]

Thanks Tomas,
   There are a set of Coddington "Pantera wheels" on ebay right now:
http://www.ebay.com/itm/Boyd-Coddington-Super-10-Spoke-Wheel-for-DeTomaso-Pantera-staggered-17x8-11-/181840688325
with this description:
"For sale is a set of four authentic Bill Coddington designed Super 10 Spoke wheels. The front wheels measure 17x8 (et 19, or a 5.25" backspacing) and the rears measure 17x11 (et 12, or a 6.5" backspacing) and have a 5x114.3 (or 5x4.5) bolt pattern."

If I have this right, the front wheels are 46mm inward versus your 19mm (about an inch difference).  That seems substantial, and could cause clearance issues?  What do you think?  I'm not sure what the "et 19" in the description means.
Ken,
       From: Tomas Gunnarsson <guson at home.se>
 To: kenn_green at yahoo.com 
Cc: detomaso at poca.com 
 Sent: Wednesday, August 19, 2015 11:50 PM
 Subject: Re: [DeTomaso] Anyone have offset numbers for 8 inch front and 10 inch rear wheels?
   
Ken, 19 mm inwards on the front wheels, 5 mm outwards on the rears is what I have noted. Tomas

<-----Ursprungligt Meddelande----->

|   |   | From: Ken Green via DeTomaso [detomaso at poca.com]
Sent: 20/8/2015 6:21:15 AM
To: detomaso at poca.com
Subject: [DeTomaso] Anyone have offset numbers for 8 inch front and 10 inch rear wheels? 

Been looking at aftermarket wheels, and need the offset (not the backspacing) to see if anything fits.  I know backspacing numbers have been posted and I think offset is backspacing - width/2, but people seem to measure the backspacing differently. 
Thanks, 
Ken |



  
-------------- next part --------------
   Thanks Tomas,
      There are a set of Coddington "Pantera wheels" on ebay right now:
   [1]http://www.ebay.com/itm/Boyd-Coddington-Super-10-Spoke-Wheel-for-DeT
   omaso-Pantera-staggered-17x8-11-/181840688325
   with this description:
   "For sale is a set of four authentic Bill Coddington designed Super 10
   Spoke wheels. The front wheels measure 17x8 (et 19, or a 5.25"
   backspacing) and the rears measure 17x11 (et 12, or a 6.5" backspacing)
   and have a 5x114.3 (or 5x4.5) bolt pattern."
   If I have this right, the front wheels are 46mm inward versus your 19mm
   (about an inch difference).  That seems substantial, and could cause
   clearance issues?  What do you think?  I'm not sure what the "et 19" in
   the description means.
   Ken,
     __________________________________________________________________

   From: Tomas Gunnarsson <guson at home.se>
   To: kenn_green at yahoo.com
   Cc: detomaso at poca.com
   Sent: Wednesday, August 19, 2015 11:50 PM
   Subject: Re: [DeTomaso] Anyone have offset numbers for 8 inch front and
   10 inch rear wheels?
   Ken,

   19 mm inwards on the front wheels, 5 mm outwards on the rears is what I
   have noted.

   Tomas
   <-----Ursprungligt Meddelande----->
       From: Ken Green via DeTomaso [detomaso at poca.com]
   Sent: 20/8/2015 6:21:15 AM
   To: detomaso at poca.com
   Subject: [DeTomaso] Anyone have offset numbers for 8 inch front and 10
   inch rear wheels?
   Been looking at aftermarket wheels, and need the offset (not the
   backspacing) to see if anything fits.  I know backspacing numbers have
   been posted and I think offset is backspacing - width/2, but people
   seem to measure the backspacing differently.
   Thanks,
   Ken

References

   1. http://www.ebay.com/itm/Boyd-Coddington-Super-10-Spoke-Wheel-for-DeTomaso-Pantera-staggered-17x8-11-/181840688325