[DeTomaso] Installing Jack Pads under the Pantera

thomas thomas at hax.se
Wed Aug 19 00:42:23 EDT 2015


I got the idea after seeing lots of fireworks in the rear view mirror once when it bottomed out at night. Haven't come around to implement it yet though. 😊

> 19 aug 2015 kl. 03:51 skrev Charles Engles <cengles at cox.net>:
> 
> Dear Thomas
> 
> 
>          Damn.  I like the way you think.  
> 
> 
>                       Impressed,  Chuck Engles
> 
> 
> 
> 
> -----Original Message-----
> From: DeTomaso [mailto:detomaso-bounces at poca.com] On Behalf Of thomas
> Sent: Tuesday, August 18, 2015 3:42 PM
> To: Mike Drew
> Cc: De Tomaso List
> Subject: Re: [DeTomaso] Installing Jack Pads under the Pantera
> 
> You should have used titanium instead, lots of fireworks when it bottoms out! 😎
> 
> You could use some soft plastic between the chassis and titanium as a cushion.
> 
>> 18 aug 2015 kl. 22:20 skrev Mike Drew via DeTomaso <detomaso at poca.com>:
>> 
>> Sure! Photo attached. 
>> 
>> It's a piece of hard plastic cut to shape. Not rocket science fortunately!
>> 
>> 
>> 
>> 
>> <image.jpeg>
>> 
>> 
>> You can see the countersunk holes which keep the screw heads from protruding. 
>> 
>> I don't have any other pads as they are unnecessary on my car. 
>> 
>> Cheers!
>> 
>> Mike
>> 
>> Sent from my iPhone
>> 
>>> On Aug 18, 2015, at 12:45, "Joseph F. Byrd, Jr." <byrdjf at embarqmail.com> wrote:
>>> 
>>> Would you have a photo you could share?
>>> Joe
>>> 
>>> -----Original Message-----
>>> From: DeTomaso [mailto:detomaso-bounces at poca.com] On Behalf Of Mike 
>>> Drew via DeTomaso
>>> Sent: Tuesday, August 18, 2015 15:10 PM
>>> To: rob at dumoulins.net; DeTomaso at poca.com
>>> Subject: Re: [DeTomaso] Installing Jack Pads under the Pantera ....I 
>>> instead got some appropriate-thickness blocks of Delrin, a super-hard 
>>> black
>>> plastic.   I cut it to shape to fit in the opening between the side and rear
>>> 
>>> chassis rails, drilled countersunk holes and then affixed it to the 
>>> underside of the car with flat-head sheetmetal screws.
>>> .....
>>> 
>>> Mike
>>> 
>>> 
>>> _______________________________________________
>>> 
>>> Detomaso Forum Managed by POCA
>>> Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list 
>>> DeTomaso at poca.com http://poca.com/mailman/listinfo/detomaso_poca.com
>>> 
>>> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>> 
>> 
>> !DSPAM:55d393af54542419826346!
>> _______________________________________________
>> 
>> Detomaso Forum Managed by POCA
>> Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list 
>> DeTomaso at poca.com http://poca.com/mailman/listinfo/detomaso_poca.com
>> 
>> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>> 
>> 
>> !DSPAM:55d393af54542419826346!
> 
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes DeTomaso mailing list DeTomaso at poca.com http://poca.com/mailman/listinfo/detomaso_poca.com
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> 
> 
> !DSPAM:55d3e12a284422457613276!
> 




More information about the DeTomaso mailing list