[DeTomaso] Installing Jack Pads under the Pantera
Bill Moore
bill at incendium.com
Mon Aug 17 19:53:25 EDT 2015
Good info. Thanks. In the memory bank.
Cheers,
Bill MooreIncendium SupplyCalgary
-------- Original message --------
From: Dave Londry <davel at emspace.com>
Date: 2015-08-17 5:35 PM (GMT-07:00)
To: Bill Moore <bill at incendium.com>, detomaso at poca.com
Subject: Re: [DeTomaso] Installing Jack Pads under the Pantera
Both good ideas Bill - but the MSD power leads must be looked after
also.
The induced voltage from welding doesn't need a battery to cook a
sparks box.
dave
On 17/08/2015 4:14 PM, Bill Moore
wrote:
Take the Damn battery OUT.
Dave get back to your power windows, September is closing
In.
I must get my defrosters installed / hooked up and LED park,
signal, brake lights switched out.
Cheers,
Bill Moore
Incendium Supply
Calgary
-------- Original message --------
From: Dave Londry <davel at emspace.com>
Date: 2015-08-17 3:42 PM (GMT-07:00)
To: detomaso at poca.com
Subject: Re: [DeTomaso] Installing Jack Pads under the Pantera
MSDs must be disconnected and the big Red and Black connected
together.
dave
On 17/08/2015 11:54 AM, Ken Green via DeTomaso wrote:
> Is it accurate that you have to disconnect electronic
ignitions etc.
> before any welding?
> Ken
>
__________________________________________________________________
>
> From: Rob Dumoulin <rob at dumoulins.net>
> To: Pantera - DeTomaso Mail List
<DeTomaso at poca.com>
> Sent: Monday, August 17, 2015 10:15 AM
> Subject: [DeTomaso] Installing Jack Pads under the
Pantera
> I'm about to do some welding and undercarriage cleaning
up on 1488
> and
> am wanting to attach small steel jack pads to the frame
at each wheel
> corner.......or whatever else works better.A Being
that the car is
> so
> light, my jack can lift the entire back or front, so
having one
> mounted
> center might also make sense.
> If anybody has done this, please let me know where the
best
> unobtrusive
> locations are.
> _______________________________________________
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [1]DeTomaso at poca.com
> [2]http://poca.com/mailman/listinfo/detomaso_poca.com
> To manage your subscription (change email address,
unsubscribe, etc.)
> use the links above.
>
> References
>
> 1. mailto:DeTomaso at poca.com
> 2. http://poca.com/mailman/listinfo/detomaso_poca.com
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
> To manage your subscription (change email address,
unsubscribe, etc.) use the links above.
--
Dave Londry
Embedded Spaces Inc. (ESI)
davel at emspace.com
604 589 9183 phone/fax
604 721 2278 cell
Skype:embeddedspaces
MSDs must be disconnected and the big Red and Black connected
together.
dave
On 17/08/2015 11:54 AM, Ken Green via DeTomaso wrote:
Is it accurate that you have to disconnect electronic ignitions
etc.
before any welding?
Ken
__________________________________________________________________
From: Rob Dumoulin [1]<rob at dumoulins.net>
To: Pantera - DeTomaso Mail List [2]<DeTomaso at poca.com>
Sent: Monday, August 17, 2015 10:15 AM
Subject: [DeTomaso] Installing Jack Pads under the Pantera
I'm about to do some welding and undercarriage cleaning up on
1488
and
am wanting to attach small steel jack pads to the frame at
each wheel
corner.......or whatever else works better.A Being that the
car is
so
light, my jack can lift the entire back or front, so having
one
mounted
center might also make sense.
If anybody has done this, please let me know where the best
unobtrusive
locations are.
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[[3]1]DeTomaso at poca.com
[2][4]http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe,
etc.)
use the links above.
References
1. [5]mailto:DeTomaso at poca.com
2. [6]http://poca.com/mailman/listinfo/detomaso_poca.com
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[7]DeTomaso at poca.com
[8]http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe,
etc.) use the li
nks above.
--
Dave Londry
Embedded Spaces Inc. (ESI)
[9]davel at emspace.com
604 589 9183 phone/fax
604 721 2278 cell
[10]Skype:embeddedspaces
References
1. mailto:rob at dumoulins.net
2. mailto:DeTomaso at poca.com
3. mailmailto:1]DeTomaso at poca.com
4. http://poca.com/mailman/listinfo/detomaso_poca.com
5. mailto:DeTomaso at poca.com
6. http://poca.com/mailman/listinfo/detomaso_poca.com
7. mailto:DeTomaso at poca.com
8. http://poca.com/mailman/listinfo/detomaso_poca.com
9. mailto:davel at emspace.com
10. Skype:embeddedspaces
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
--
Dave Londry
Embedded Spaces Inc. (ESI)
davel at emspace.com
604 589 9183 phone/fax
604 721 2278 cell
Skype:embeddedspaces
-------------- next part --------------
Good info. Thanks. In the memory bank.
Cheers,
Bill Moore
Incendium Supply
Calgary
-------- Original message --------
From: Dave Londry <davel at emspace.com>
Date: 2015-08-17 5:35 PM (GMT-07:00)
To: Bill Moore <bill at incendium.com>, detomaso at poca.com
Subject: Re: [DeTomaso] Installing Jack Pads under the Pantera
Both good ideas Bill - but the MSD power leads must be looked after
also.
The induced voltage from welding doesn't need a battery to cook a
sparks box.
dave
On 17/08/2015 4:14 PM, Bill Moore wrote:
Take the Damn battery OUT.
Dave get back to your power windows, September is closing In.
I must get my defrosters installed / hooked up and LED park, signal,
brake lights switched out.
Cheers,
Bill Moore
Incendium Supply
Calgary
-------- Original message --------
From: Dave Londry [1]<davel at emspace.com>
Date: 2015-08-17 3:42 PM (GMT-07:00)
To: [2]detomaso at poca.com
Subject: Re: [DeTomaso] Installing Jack Pads under the Pantera
MSDs must be disconnected and the big Red and Black connected together.
dave
On 17/08/2015 11:54 AM, Ken Green via DeTomaso wrote:
> Is it accurate that you have to disconnect electronic ignitions
etc.
> before any welding?
> Ken
>
__________________________________________________________________
>
> From: Rob Dumoulin [3]<rob at dumoulins.net>
> To: Pantera - DeTomaso Mail List [4]<DeTomaso at poca.com>
> Sent: Monday, August 17, 2015 10:15 AM
> Subject: [DeTomaso] Installing Jack Pads under the Pantera
> I'm about to do some welding and undercarriage cleaning up on
1488
> and
> am wanting to attach small steel jack pads to the frame at each
wheel
> corner.......or whatever else works better.A Being that the
car is
> so
> light, my jack can lift the entire back or front, so having one
> mounted
> center might also make sense.
> If anybody has done this, please let me know where the best
> unobtrusive
> locations are.
> _______________________________________________
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [[5]1]DeTomaso at poca.com
> [2][6]http://poca.com/mailman/listinfo/detomaso_poca.com
> To manage your subscription (change email address, unsubscribe,
etc.)
> use the links above.
>
> References
>
> 1. [7]mailto:DeTomaso at poca.com
> 2. [8]http://poca.com/mailman/listinfo/detomaso_poca.com
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [9]DeTomaso at poca.com
> [10]http://poca.com/mailman/listinfo/detomaso_poca.com
>
> To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
--
Dave Londry
Embedded Spaces Inc. (ESI)
[11]davel at emspace.com
604 589 9183 phone/fax
604 721 2278 cell
[12]Skype:embeddedspaces
MSDs must be disconnected and the big Red and Black connected
together.
dave
On 17/08/2015 11:54 AM, Ken Green via DeTomaso wrote:
Is it accurate that you have to disconnect electronic ignitions etc.
before any welding?
Ken
__________________________________________________________________
From: Rob Dumoulin [1][13]<rob at dumoulins.net>
To: Pantera - DeTomaso Mail List [2][14]<DeTomaso at poca.com>
Sent: Monday, August 17, 2015 10:15 AM
Subject: [DeTomaso] Installing Jack Pads under the Pantera
I'm about to do some welding and undercarriage cleaning up on 1488
and
am wanting to attach small steel jack pads to the frame at each
wheel
corner.......or whatever else works better.A Being that the car
is
so
light, my jack can lift the entire back or front, so having one
mounted
center might also make sense.
If anybody has done this, please let me know where the best
unobtrusive
locations are.
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[[[15]3]1]DeTomaso at poca.com
[2][4][16]http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe,
etc.)
use the links above.
References
1. [5][17]mailto:DeTomaso at poca.com
2. [6][18]http://poca.com/mailman/listinfo/detomaso_poca.com
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[[19]7]DeTomaso at poca.com
[8][20]http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe, etc.)
use the li
nks above.
--
Dave Londry
Embedded Spaces Inc. (ESI)
[[21]9]davel at emspace.com
604 589 9183 phone/fax
604 721 2278 cell
[10][22]Skype:embeddedspaces
References
1. [23]mailto:rob at dumoulins.net
2. [24]mailto:DeTomaso at poca.com
3. [25]mail[26]mailto:1]DeTomaso at poca.com
4. [27]http://poca.com/mailman/listinfo/detomaso_poca.com
5. [28]mailto:DeTomaso at poca.com
6. [29]http://poca.com/mailman/listinfo/detomaso_poca.com
7. [30]mailto:DeTomaso at poca.com
8. [31]http://poca.com/mailman/listinfo/detomaso_poca.com
9. [32]mailto:davel at emspace.com
10. [33]Skype:embeddedspaces
_______________________________________________
Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[34]DeTomaso at poca.com
[35]http://poca.com/mailman/listinfo/detomaso_poca.com
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
--
Dave Londry
Embedded Spaces Inc. (ESI)
[36]davel at emspace.com
604 589 9183 phone/fax
604 721 2278 cell
[37]Skype:embeddedspaces
References
1. mailto:davel at emspace.com
2. mailto:detomaso at poca.com
3. mailto:rob at dumoulins.net
4. mailto:DeTomaso at poca.com
5. mailto:1]DeTomaso at poca.com
6. http://poca.com/mailman/listinfo/detomaso_poca.com
7. mailto:DeTomaso at poca.com
8. http://poca.com/mailman/listinfo/detomaso_poca.com
9. mailto:DeTomaso at poca.com
10. http://poca.com/mailman/listinfo/detomaso_poca.com
11. mailto:davel at emspace.com
12. Skype:embeddedspaces
13. mailto:rob at dumoulins.net
14. mailto:DeTomaso at poca.com
15. mailto:3]1]DeTomaso at poca.com
16. http://poca.com/mailman/listinfo/detomaso_poca.com
17. mailto:DeTomaso at poca.com
18. http://poca.com/mailman/listinfo/detomaso_poca.com
19. mailto:7]DeTomaso at poca.com
20. http://poca.com/mailman/listinfo/detomaso_poca.com
21. mailto:9]davel at emspace.com
22. Skype:embeddedspaces
23. mailto:rob at dumoulins.net
24. mailto:DeTomaso at poca.com
25. mailto:1
26. mailto:mailto:1]DeTomaso at poca.com
27. http://poca.com/mailman/listinfo/detomaso_poca.com
28. mailto:DeTomaso at poca.com
29. http://poca.com/mailman/listinfo/detomaso_poca.com
30. mailto:DeTomaso at poca.com
31. http://poca.com/mailman/listinfo/detomaso_poca.com
32. mailto:davel at emspace.com
33. Skype:embeddedspaces
34. mailto:DeTomaso at poca.com
35. http://poca.com/mailman/listinfo/detomaso_poca.com
36. mailto:davel at emspace.com
37. Skype:embeddedspaces
More information about the DeTomaso
mailing list