[DeTomaso] Bullfrog Blues

[John Taphorn]

Yep Julian, the outcome could have been worse.  Thanks for the 
suggestion on the painted mirrors.  Any chance you have easy access to 
the source?

On 8/16/2015 7:38 PM, Julian Kift wrote:
> John,
>
> I think you have to take solace in the fact you were indeed lucky the 
> mirror didn't bounce along the side of the car.
>
> A shame you couldn't recover the mirror for a postmortem, is there any 
> likelihood it could have impacted with something by way of a large 
> Texas bug providing a sudden impact stress?
>
> You mention a lot of time in prep for paint; I don't know if you 
> started with the black plastic mirrors and prepped them, but many of 
> the Vitaloni's are available colored and much simpler to prep for 
> repaint I have found.
>
> Julian
>
> From: jtaphorn at kingwoodcable.com
> To: DeTomaso at poca.com
> Date: Sun, 16 Aug 2015 18:02:54 -0500
> Subject: [DeTomaso] Bullfrog Blues
>
> My son and I took the Bullfrog , my green Pantera, for a drive to Texas
> World Speedway today.  Rob Pink was running his 240z at the track and we
> thought we would spectate.  About 1 mile from the track, the highway
> narrows and I thought it unlikely the local gendarmes would be on this
> section as the shoulders are narrow with no safe place to pull over or
> park with a radar gun.
>   
> The speed limit is 75 so I hammered the throttle. I not absolutely
> certain of the velocity, and it may be foolish to disclose on a public
> forum, however, it was well into triple digits and fast enough to blow
> off my drivers side Vitaloni mirror.  Out of the corner of my eye, I saw
> it twist. I quickly released the throttle, yet too late as it separated
> from the Pantera.  Fortunately, it did not smack up against the car.
>   
> I assumed that I had carelessly allowed the set screw to loosen that
> holds the assembly to the bracket attached to the car.  Those personal
> errors make me upset.  When we arrived at the track I had an opportunity
> to better inspect the problem. To my surprise, the mounting pieces were
> all still in place and tight.  Rather, the aluminum casting surrendered
> to the air onslaught.  This is rather bazaar.  See the attached pics to
> compare with the passenger side mirror.
>   
> I did not recover the actual mirror.  I could not pull over for over a
> .5 mile down the road and it was not a safe section of highway to walk.
> I can't imagine that there was much left of the mirror tumbling down the
> pavement at that speed.  I had a lot of time spent prepping that piece
> for paint - oh well.  Perhaps, I had the bad draw of a poor casting.
> Has anyone else suffered this fate with the Vitaloni.
>   
> Now, I need to find another matching mirror and convince myself that I
> had a bad aluminum casting.  Maybe I just need to slow down.  I was
> channeling Art Stephens.
>   
> Dave Hall, what mirror do you have on Limezotica? Those were awesome.
>   
> JT
>   
>   
>
> _______________________________________________ Detomaso Forum Managed 
> by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing 
> list DeTomaso at poca.com 
> http://poca.com/mailman/listinfo/detomaso_poca.com To manage your 
> subscription (change email address, unsubscribe, etc.) use the links 
> above.

-------------- next part --------------
   Yep Julian, the outcome could have been worse.  Thanks for the
   suggestion on the painted mirrors.  Any chance you have easy access to
   the source?

   On 8/16/2015 7:38 PM, Julian Kift wrote:

   John,
   I think you have to take solace in the fact you were indeed lucky the
   mirror didn't bounce along the side of the car.
   A shame you couldn't recover the mirror for a postmortem, is there any
   likelihood it could have impacted with something by way of a large
   Texas bug providing a sudden impact stress?
   You mention a lot of time in prep for paint; I don't know if you
   started with the black plastic mirrors and prepped them, but many of
   the Vitaloni's are available colored and much simpler to prep for
   repaint I have found.
   Julian
   From: [1]jtaphorn at kingwoodcable.com
   To: [2]DeTomaso at poca.com
   Date: Sun, 16 Aug 2015 18:02:54 -0500
   Subject: [DeTomaso] Bullfrog Blues
My son and I took the Bullfrog , my green Pantera, for a drive to Texas
World Speedway today.  Rob Pink was running his 240z at the track and we
thought we would spectate.  About 1 mile from the track, the highway
narrows and I thought it unlikely the local gendarmes would be on this
section as the shoulders are narrow with no safe place to pull over or
park with a radar gun.

The speed limit is 75 so I hammered the throttle. I not absolutely
certain of the velocity, and it may be foolish to disclose on a public
forum, however, it was well into triple digits and fast enough to blow
off my drivers side Vitaloni mirror.  Out of the corner of my eye, I saw
it twist. I quickly released the throttle, yet too late as it separated
from the Pantera.  Fortunately, it did not smack up against the car.

I assumed that I had carelessly allowed the set screw to loosen that
holds the assembly to the bracket attached to the car.  Those personal
errors make me upset.  When we arrived at the track I had an opportunity
to better inspect the problem. To my surprise, the mounting pieces were
all still in place and tight.  Rather, the aluminum casting surrendered
to the air onslaught.  This is rather bazaar.  See the attached pics to
compare with the passenger side mirror.

I did not recover the actual mirror.  I could not pull over for over a
.5 mile down the road and it was not a safe section of highway to walk.
I can't imagine that there was much left of the mirror tumbling down the
pavement at that speed.  I had a lot of time spent prepping that piece
for paint - oh well.  Perhaps, I had the bad draw of a poor casting.
Has anyone else suffered this fate with the Vitaloni.

Now, I need to find another matching mirror and convince myself that I
had a bad aluminum casting.  Maybe I just need to slow down.  I was
channeling Art Stephens.

Dave Hall, what mirror do you have on Limezotica? Those were awesome.

JT



   _______________________________________________ Detomaso Forum Managed
   by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing
   list [3]DeTomaso at poca.com
   [4]http://poca.com/mailman/listinfo/detomaso_poca.com To manage your
   subscription (change email address, unsubscribe, etc.) use the links
   above.

References

   1. mailto:jtaphorn at kingwoodcable.com
   2. mailto:DeTomaso at poca.com
   3. mailto:DeTomaso at poca.com
   4. http://poca.com/mailman/listinfo/detomaso_poca.com