[DeTomaso] Lug nut torque

Richard Greenblum Richard at richardgreenblum.com
Mon Apr 20 08:30:50 EDT 2015 

At least 30 years ago when I purchased 10s for the rear, Dennis Quella told
me to use 57 ft lbs with my Campys.  Always have, never had a problem.

Richard
Austin, TX
7080


From:  Larry Weston <lplugw at hotmail.com>
Date:  Monday, April 20, 2015 at 5:32 AM
To:  Tomas Gunnarsson <guson at home.se>, MikeDrew <MikeLDrew at aol.com>
Cc:  deTomaso List <detomaso at poca.com>
Subject:  Re: [DeTomaso] Lug nut torque

   What is the rating of the studs?
   I found a chart that indicates a max torque of 59 ft lbs for 12 mm
   grade 8.8 and 83 ft lbs for the grade 10.9.
   From: guson at home.se
   To: MikeLDrew at aol.com
   Date: Sun, 19 Apr 2015 23:51:10 -0700
   CC: detomaso at poca.com
   Subject: Re: [DeTomaso] Lug nut torque
I've owned a Mercedes and a BMW and they both use the same thread bolts
as the Pantera for the wheels. Mercedes says 110 Nm (81 lbs) and BMW 100
Nm (74 lbs). I think it's OK with either of them for the Pantera. I've
used 110 Nm myself.

Tomas

<-----Ursprungligt Meddelande----->

                 From: Mike Drew via DeTomaso [detomaso at poca.com]
Sent: 20/4/2015 1:29:26 AM
To: grayjim at cox.net
Cc: detomaso at poca.com
Subject: Re: [DeTomaso] Lug nut torque

Jim--The factory shop manual rating seems absurdly low to me. I use 75
lbs.

Mike

Sent from my iPhone

On Apr 19, 2015, at 10:26, "Jim Gray" <grayjim at cox.net> wrote:

>  How much torque is needed on lugs for Pantera East Campy Clone
aluminum wheels?
> 
>  Thanks
> 
>  Jim Gray
> 
>  _______________________________________________
> 
>  Detomaso Forum Managed by POCA
>  Posted emails must not exceed 1.5 Megabytes
>  DeTomaso mailing list
>  DeTomaso at poca.com
>  [1]http://poca.com/mailman/listinfo/detomaso_poca.com
> 
>  To manage your subscription (change email address, unsubscribe, etc.)
use the links above.

_______________________________________________

Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at poca.com
[2]http://poca.com/mailman/listinfo/detomaso_poca.com

To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
.

   _______________________________________________ Detomaso Forum Managed
   by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing
   list DeTomaso at poca.com
   http://poca.com/mailman/listinfo/detomaso_poca.com To manage your
   subscription (change email address, unsubscribe, etc.) use the links
   above.

References

   1. http://poca.com/mailman/listinfo/detomaso_poca.com
   2. http://poca.com/mailman/listinfo/detomaso_poca.com
_______________________________________________

Detomaso Forum Managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com

To manage your subscription (change email address, unsubscribe, etc.) use
the links above.



-------------- next part --------------
   At least 30 years ago when I purchased 10s for the rear, Dennis Quella
   told me to use 57 ft lbs with my Campys.  Always have, never had a
   problem.
   Richard
   Austin, TX
   7080

   From: Larry Weston <[1]lplugw at hotmail.com>
   Date: Monday, April 20, 2015 at 5:32 AM
   To: Tomas Gunnarsson <[2]guson at home.se>, MikeDrew
   <[3]MikeLDrew at aol.com>
   Cc: deTomaso List <[4]detomaso at poca.com>
   Subject: Re: [DeTomaso] Lug nut torque

      What is the rating of the studs?
      I found a chart that indicates a max torque of 59 ft lbs for 12 mm
      grade 8.8 and 83 ft lbs for the grade 10.9.
      From: [5]guson at home.se
      To: [6]MikeLDrew at aol.com
      Date: Sun, 19 Apr 2015 23:51:10 -0700
      CC: [7]detomaso at poca.com
      Subject: Re: [DeTomaso] Lug nut torque
   I've owned a Mercedes and a BMW and they both use the same thread bolts
   as the Pantera for the wheels. Mercedes says 110 Nm (81 lbs) and BMW
   100
   Nm (74 lbs). I think it's OK with either of them for the Pantera. I've
   used 110 Nm myself.
   Tomas
   <-----Ursprungligt Meddelande----->
                    From: Mike Drew via DeTomaso [[8]detomaso at poca.com]
   Sent: 20/4/2015 1:29:26 AM
   To: [9]grayjim at cox.net
   Cc: [10]detomaso at poca.com
   Subject: Re: [DeTomaso] Lug nut torque
   Jim--The factory shop manual rating seems absurdly low to me. I use 75
   lbs.
   Mike
   Sent from my iPhone
   On Apr 19, 2015, at 10:26, "Jim Gray" <[11]grayjim at cox.net> wrote:

   How much torque is needed on lugs for Pantera East Campy Clone

   aluminum wheels?

   Thanks

   Jim Gray

   _______________________________________________

   Detomaso Forum Managed by POCA

   Posted emails must not exceed 1.5 Megabytes

   DeTomaso mailing list

   [12]DeTomaso at poca.com

   [1][13]http://poca.com/mailman/listinfo/detomaso_poca.com

   To manage your subscription (change email address, unsubscribe, etc.)

   use the links above.
   _______________________________________________
   Detomaso Forum Managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [14]DeTomaso at poca.com
   [2][15]http://poca.com/mailman/listinfo/detomaso_poca.com
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   .
      _______________________________________________ Detomaso Forum
   Managed
      by POCA Posted emails must not exceed 1.5 Megabytes DeTomaso mailing
      list [16]DeTomaso at poca.com
      [17]http://poca.com/mailman/listinfo/detomaso_poca.com To manage
   your
      subscription (change email address, unsubscribe, etc.) use the links
      above.
   References
      1. [18]http://poca.com/mailman/listinfo/detomaso_poca.com
      2. [19]http://poca.com/mailman/listinfo/detomaso_poca.com
   _______________________________________________
   Detomaso Forum Managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [20]DeTomaso at poca.com
   [21]http://poca.com/mailman/listinfo/detomaso_poca.com
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.

References

   1. mailto:lplugw at hotmail.com
   2. mailto:guson at home.se
   3. mailto:MikeLDrew at aol.com
   4. mailto:detomaso at poca.com
   5. mailto:guson at home.se
   6. mailto:MikeLDrew at aol.com
   7. mailto:detomaso at poca.com
   8. mailto:detomaso at poca.com
   9. mailto:grayjim at cox.net
  10. mailto:detomaso at poca.com
  11. mailto:grayjim at cox.net
  12. mailto:DeTomaso at poca.com
  13. http://poca.com/mailman/listinfo/detomaso_poca.com
  14. mailto:DeTomaso at poca.com
  15. http://poca.com/mailman/listinfo/detomaso_poca.com
  16. mailto:DeTomaso at poca.com
  17. http://poca.com/mailman/listinfo/detomaso_poca.com
  18. http://poca.com/mailman/listinfo/detomaso_poca.com
  19. http://poca.com/mailman/listinfo/detomaso_poca.com
  20. mailto:DeTomaso at poca.com
  21. http://poca.com/mailman/listinfo/detomaso_poca.com

More information about the DeTomaso mailing list