[DeTomaso] Shocks
rcbsons1 at aol.com
rcbsons1 at aol.com
Thu Apr 9 17:38:40 EDT 2015
1" both ends with spheres
Car now has the 550/750 with Aldans same bars and everything is ok
Less tire from 335 to 315 also helps so no push
Bob
-----Original Message-----
From: jderyke <jderyke at aol.com>
To: rcbsons1 <rcbsons1 at aol.com>; detomaso <detomaso at poca.com>
Sent: Thu, Apr 9, 2015 12:59 pm
Subject: Re: [DeTomaso] Shocks
What size swaybars are you using? With sphere-ball ends, no doubt?
..
speaking of the light springs that Larry sells, I was hitting the halfshafts in
the back while tracking the first time
and picking the front wheel off the
inside front.
-----Original Message-----
From: bens1 via DeTomaso
<detomaso at poca.com>
To: detomaso <detomaso at poca.com>
Sent: Thu, Apr 9, 2015
8:27 am
Subject: [DeTomaso] Shocks
Still running Aldan Americans 550 front
750 rears
Yes they leak now and then
but I just box them up
and send
them to Carson to get them fixed for free
due
to the life time guarantee..
I have an extra front and back
They are
also on rubber bushings.I think
better...the Heims on my
carerras were shot
and I replaced them once and
shot
again not long afterwards
I did drill
out the holes when I bought
Larrys' shocks
a long time ago.. was needed...
so 1/2" works fine..
speaking of
the light springs that Larry sells I was
hitting the
halfshafts
in the back while tracking the first time and picking
the
front wheel off the inside front.. way too soft for me
Bob
Benson-
Pantracer
_______________________________________________
Detomaso Forum Managed
by
POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso
mailing
list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
To
manage
your subscription (change email address, unsubscribe, etc.) use the
links
above.
-------------- next part --------------
1" both ends with spheres
Car now has the 550/750 with Aldans same bars and everything is ok
Less tire from 335 to 315 also helps so no push
Bob
-----Original Message-----
From: jderyke <jderyke at aol.com>
To: rcbsons1 <rcbsons1 at aol.com>; detomaso <detomaso at poca.com>
Sent: Thu, Apr 9, 2015 12:59 pm
Subject: Re: [DeTomaso] Shocks
What size swaybars are you using? With sphere-ball ends, no doubt?
..
speaking of the light springs that Larry sells, I was hitting the halfshafts in
the back while tracking the first time
and picking the front wheel off the
inside front.
-----Original Message-----
From: bens1 via DeTomaso
<[1]detomaso at poca.com>
To: detomaso <[2]detomaso at poca.com>
Sent: Thu, Apr 9, 2015
8:27 am
Subject: [DeTomaso] Shocks
Still running Aldan Americans 550 front
750 rears
Yes they leak now and then
but I just box them up
and send
them to Carson to get them fixed for free
due
to the life time guarantee..
I have an extra front and back
They are
also on rubber bushings.I think
better...the Heims on my
carerras were shot
and I replaced them once and
shot
again not long afterwards
I did drill
out the holes when I bought
Larrys' shocks
a long time ago.. was needed...
so 1/2" works fine..
speaking of
the light springs that Larry sells I was
hitting the
halfshafts
in the back while tracking the first time and picking
the
front wheel off the inside front.. way too soft for me
Bob
Benson-
Pantracer
_______________________________________________
Detomaso Forum Managed
by
POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso
mailing
list
[3]DeTomaso at poca.com
[4]http://poca.com/mailman/listinfo/detomaso_poca.com
To
manage
your subscription (change email address, unsubscribe, etc.) use the
links
above.
References
1. mailto:detomaso at poca.com
2. mailto:detomaso at poca.com
3. mailto:DeTomaso at poca.com
4. http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list