[DeTomaso] Valve Lash Adjusting Tool
Asa Jay Laughton
asajay at asajay.com
Sun Sep 28 22:52:49 EDT 2014
Well then that makes more sense. Thank you Forest. :)
Asa Jay
Asa Jay Laughton, MSgt, USAFR, Retired
& Shelley Marie
Spokane, WA
******************************
http://www.racingagainstautism.com
http://www.teampanteraracing.com
http://facebook.com/racingagainstautism
On 9/28/2014 2:55 PM, Forest Goodhart wrote:
> Because Mike is referring to his cobra which has shaft mounted rockers.
> Think 427 FE.
> Forest
> From: Asa Jay Laughton <asajay at asajay.com>
> To: detomaso at poca.com
> Sent: Sunday, September 28, 2014 2:28 PM
> Subject: Re: [DeTomaso] Valve Lash Adjusting Tool
> Why does Mike's procedure NOT sound right to me?
> The allen bolt on the inside sits against the top of the rocker arm
> stud. The adjusting nut (hense called an "adjusting nut" sits against
> the rocker arm pivot. If I adjust lash with the allen bolt and then
> hold it in place, I can crank on the adjusting nut and it will just
> keep
> going until the valve is open. Why does your procedure not work for me
> Mike?
> Asa Jay
> Asa Jay Laughton, MSgt, USAFR, Retired
> & Shelley Marie
> Spokane, WA
> ******************************
> [1]http://www.racingagainstautism.com/
> [2]http://www.teampanteraracing.com/
> [3]http://facebook.com/racingagainstautism
> On 9/28/2014 9:55 AM, Mike Drew via DeTomaso wrote:
> > Charlie,
> >
> > I have one of these tools for my 427 Cobra and it works great.
> >
> > You seem to misunderstand the procedure for setting valve lash. Lash
> is adjusted using the Allen bolt on the inside. The position of that
> bolt is retained by tightening the nut on the outside.
> >
> > In practice, with this tool you set your valve lash, then hold the
> inner handle stationary to preserve the lash while using the outer
> handle to tighten the nut which locks it in position. If you allow the
> inner portion to rotate as you tighten the nut, you change the lash....
> >
> > Mike
> >
> > Sent from my iPhone
> >
> > On Sep 28, 2014, at 5:09, Charles McCall <[4]charlesmccall at gmail.com>
> wrote:
> >
> >> Has anyone used a tool like this to set their valve lash with solid
> >> lifters?
> >>
> [1][5]http://www.ebay.com/itm/COMP-CAMS-3-16-Valve-Lash-adjuster-wrench
> -to
> >>
> ol-5304-full-bore-/361063973727?pt=Motors_Car_Truck_Parts_Accessories&h
> >> ash=item541117035f&vxp=mtr
> >> A
> >> Can you tighten down the rockers sufficiently using the allen
> wrench
> >> without tightening the nut that sets lash? Currently, in order to
> >> tigthen the center allen bolt I need to tighten the surrounding nut
> as
> >> well. Despite having lived with this engine for 14 years now, I've
> >> never gotten the trick of doing this on the first shot and
> inevitably
> >> have to loosen and tighten several times before I can get the lash
> to
> >> be where I want it.
> >> A
> >> This tool would allow me to set EXACTLY the desired lash, if just
> >> tightening the allen bolt is sufficient to hold everythingin
> place...
> >> A
> >> Thanks!
> >>
> >> References
> >>
> >> 1.
> [6]http://www.ebay.com/itm/COMP-CAMS-3-16-Valve-Lash-adjuster-wrench-to
> ol-5304-full-bore-/361063973727?pt=Motors_Car_Truck_Parts_Accessories&h
> ash=item541117035f&vxp=mtr
> >> _______________________________________________
> >>
> >> Detomaso Forum Managed by POCA
> >>
> >> DeTomaso mailing list
> >> [7]DeTomaso at poca.com
> >> [8]http://poca.com/mailman/listinfo/detomaso_poca.com
> > _______________________________________________
> >
> > Detomaso Forum Managed by POCA
> >
> > DeTomaso mailing list
> > [9]DeTomaso at poca.com
> > [10]http://poca.com/mailman/listinfo/detomaso_poca.com
> >
> >
> > -----
> > No virus found in this message.
> > Checked by AVG - www.avg.com
> > Version: 2014.0.4765 / Virus Database: 4025/8288 - Release Date:
> 09/28/14
> >
> >
> _______________________________________________
> Detomaso Forum Managed by POCA
> DeTomaso mailing list
> [11]DeTomaso at poca.com
> [12]http://poca.com/mailman/listinfo/detomaso_poca.com
>
> References
>
> 1. http://www.racingagainstautism.com/
> 2. http://www.teampanteraracing.com/
> 3. http://facebook.com/racingagainstautism
> 4. mailto:charlesmccall at gmail.com
> 5. http://www.ebay.com/itm/COMP-CAMS-3-16-Valve-Lash-adjuster-wrench-to
> 6. http://www.ebay.com/itm/COMP-CAMS-3-16-Valve-Lash-adjuster-wrench-tool-5304-full-bore-/361063973727?pt=Motors_Car_Truck_Parts_Accessories&hash=item541117035f&vxp=mtr
> 7. mailto:DeTomaso at poca.com
> 8. http://poca.com/mailman/listinfo/detomaso_poca.com
> 9. mailto:DeTomaso at poca.com
> 10. http://poca.com/mailman/listinfo/detomaso_poca.com
> 11. mailto:DeTomaso at poca.com
> 12. http://poca.com/mailman/listinfo/detomaso_poca.com
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4765 / Virus Database: 4025/8290 - Release Date: 09/28/14
More information about the DeTomaso
mailing list